1、A-A-59106 9018054 0003375 12b METRIC 26 August 1998 SUPERSEDING 3 December 1992 A-A-59106 TT-E-78 1 D COMMERCIAL ITEM DESCRIPTION ETHYLENE GLYCOL MONOETHYL ETHER, TECHNICAL The General Services Administration has authorized the use of this commercial item for all federal agencies. 1. SCOPE. This com
2、mercial item description covers technical grade ethylene glycol monoethyl ether. 2. SALIENT CHARACTERISTICS 2.1 Amearance. Ethylene glycol monoethyl ether shall be clear and uniform when visually inspected using transmitted light. 2.2 Chemical and physical characteristics. Ethylene glycol monoethyl
3、ether shall conform to the chemical and physical characteristics of Table I when tested as specified therein. 2.3 Spot test. Support a piece of 125 millimeter (mm) diameter filter paper (Whatman No. 2 or equal) on a crystallizing dish, which is 70 mm in diameter. Using a small pipette or burette, pl
4、ace five drops of the specimen the center of the paper. Allow the liquid to evaporate at 21 OC to 32“C, away from both sunlight and strong drafts. Mer 30 minutes examine the filter paper for the presence of any stains or residual oiliness. Beneficial comments, recommendations, additions, deletions,
5、clarifications, etc., and any data which may improve this document should be sent by letter to: Defense Supply Center Richmond CDSCR), ATN: DSCR-VBD, 8000 Jefferson Davis Highway, Richmond, VA 23297-5610. AMSC NfA FSC 6810 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimi
6、ted. Licensed by Information Handling ServicesA-A-591 06 A-A-59106 9038054 000317b Ob2 TABLE I. Chemical and physical characteristics. Characteristics Color, Pt-Co Scale Odor Water content, percent by weight Specific gravity at 20“/20“C Nonvolatile matter (g/100 ml sample) Acidity (ffee acid as acet
7、ic acid), percent by weight Distillation range, “C Flash Point, OC Evaporation rate (n-butyl acetate = 1 .O) Spot test Sulfur Reauirements Min Max Number 15 Mild, Non-residua o. 1 0.932 0.005 0.01 136.0 - 0.34 none none Test Method ASTM D 1209 ASTM D 1296 ASTM D 1364 ASTM D 891 ASTMD 1353 ASTMD 1613
8、 ASTM D 1078“ ASTM D 56 ASTM D 3539 para 3.3 of this description ASTM D 853 () Using ASTM Solvents Distillation Thermometer 102C, with a range from 123OC to 177OC. 3. REGULATORY REQUIREMENTS 3.1 Labeling. Dackaaina and marking. Item shall be labeled, packed and marked in accordance with Title 49 Cod
9、e of Federal Regulations (CFR), Pars 171 to 199. 3.2 Recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). Unless otherwise specified herein, all equipme
10、nt, material, and articles incorporated in the work covered by this CID are to be new and fabricated using materials produced ffom recovered materials to the maximum extent possible without jeopardizing the intended use. The term “recovered materials“ means materials which have been collected or rec
11、overed from solid waste and reprocessed to become a source of raw materials, as opposed to virgin raw materials. Unless otherwise specified, none of the above shall be interpreted to mean that the use of used or rebuilt products are allowed under this CID. 3.3 Material safety data sheets MSDSs). MSD
12、Ss shall be prepared and furnished in accordance with 29 CFR 19 1 O. 1200 and submitted as directed in the contract or order at time of acquisition award. 2 Licensed by Information Handling Services4 A-A-59306 9038054 0003377 TT9 A-A-591 06 4. QUALITY ASSURANCE PROVISIONS 4.1 Product conformance. Th
13、e product provided shall meet the salient characteristics of this commercial item description, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The govemment reserves the right t
14、o require proof of such conformance. 4.2 Market acceptability. The item offered must have been sold to the govemment or commercial market. 5. PACKAGING. Preservation, packing, labeling, and marking shall be as specified in the contract or order. 6. NOTES. 6.1 Source of documents. 6.1.1 American Soci
15、ety for Testing and Materials standards may be obtained fiom the American Society for Testing and Materials, 1 O0 Barr Harbor Drive, West Conshohocken, PA 19428-2959. 6.1.2 The Code of Federal Regulations may be obtained from the Superintendent of Documents, U.S. Government Printing Office, Washingt
16、on, DC 20402-0001. 6.2 Ordering data. Acquisition documents must specifi the following: a. Title, name, and date of this CID. b. Unit quantity required. c. Packaging requirements. 6.3 National stock numbers ?SNSI. The following NSNs correspond to this CID. This list may not be indicative of all poss
17、ible NSNs associated with this document. 68 10-00- 100-2570 68 10-00-222-275 1 68 10-00-285-4309 6.4 Sources of supply. The following companies are known to meet the requirements of this CID. Competition is not limited to these suppliers. Company Union Carbide Corporation 10235 West Little York, Sui
18、te 300 Houston, TX 77040 (800) 568-4000 3 Licensed by Information Handling Services A-A-59106 901BO5Y 0003178 935 A-A-59 106 Occidental Chemical Corporation Petrochemicals Group Occidental Tower 5005 LBJ Freeway Dallas, TX 75244 (800) 752-5 15 1 MILITARY INTERESTS: Custodians: Air Force - 68 Army -EA Reviewers: Army - MDl CIVIL AGENCY COORDINATING ACTIVITIES: GSA - FSS Preparing Activity: DLA - GS (Project No: 6810-1385) Licensed by Information Handling Services
