DLA A-A-59162-1998 DIETHYLENETRIAMINE TECHNICAL《工业二亚乙基三胺》.pdf

上传人:花仙子 文档编号:687121 上传时间:2018-12-30 格式:PDF 页数:2 大小:88.75KB
下载 相关 举报
DLA A-A-59162-1998 DIETHYLENETRIAMINE TECHNICAL《工业二亚乙基三胺》.pdf_第1页
第1页 / 共2页
DLA A-A-59162-1998 DIETHYLENETRIAMINE TECHNICAL《工业二亚乙基三胺》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、INCH-POUND A-A-59162 11 June 1998 SUPERSEDING 20 June 1985 0-D-1271B COMMERCIAL ITEM DESCRIPTION DIETHYLENETRIAMINE, TECHNICAL Assay, % by weight (Minimum) Water content, % by weight (Maximum) Specific gravity at 20/20 OC Distillation range at 760 mm Hg: Initial boiling point, “C (Minimum) Dry point

2、 OC (Maximum) The General Services Administration has authorized the use of this commercial item description as a replacement for O-D-127 1 B, for all federal agencies. 97.0 0.5 ASTM El 064 Gas Chromatography (See Note 1) 0.950 - 0.958 ASTM D891, Method A ASTM D86 185.0 215.0 1. for use in the manu

3、facture of Decontatninating Agent, DS2. SCOPE. This commercial item description (CID) covers technical grade diethylenetriamine 2. SALIENT CHARACTERISTICS 2.1 ammoniacal odor. 2.2 shall conform to the requirements and test methods specified in table I. General. Diethylenetriamine is a clear, colorle

4、ss-to-light-amber liquid with a mild Chemical and Dhvsical properties. The diethylenetriamine acquired under this document TABLE I. Chemicdphvsical requirements. Properties 1 Requirement I Test Method Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any other dat

5、a which may improve this document should be sent to: Defense Supply Center Richmond (DSCR), ATTN: DSCR-VBD, 8000 Jefferson Davis Highway, Richmond, VA 23297-5678. AMSC N/A FSC 6810 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo repro

6、duction or networking permitted without license from IHS-,-,-A-A-59 1 62 3. REGULATORY REQUIREMENTS 3.1 Material safety data sheet. Manufacturers shall prepare and submit a material safety data sheet (MSDS) in accordance with FED-STD-3 13 and meeting the Code of Federal Regulations requirements of 2

7、9CFR 1910.1200. 4. QUALITY ASSURANCE PROVISIONS 4.1 commercial item description, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The government reserves the right to require proof of

8、 such conformance. Product conformance. The products provided shall meet the salient characteristics of this 5. PACKAGING 5.1 preserved, packed, and marked as specified in the contract or order. Preservation. uacking. and marking. For acquisition purposes, diethylenetriamine shall be 6. NOTES 6.1 Re

9、ferenced documents. 6.1.1 Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. 6.1.2 States Pharmacopoeia Convention, Inc., 12601 Twinbrook Parkway, Rockville, MD 20852. 6.2 National stock number (I? SN). This CID is associated with NSN 68 10-00-995-4804. Other NSNs may also correspon

10、d with the product specified in this CID. Copies of ASTM standards may be obtained fiom the American Society for Testing and Copies of U.S. Pharmacopoeia National Formulary may be obtained fiom the United MILITARY INTERESTS: CUStOdian: Air Force - 68 Army-MD CML AGENCY COORDINATING ACTIVITY GSA - FSS Preparing activity: DLA - GS (Project 68 1 O- 14 1 7) 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • BS 5126-1-1993 Mining type flameproof supply and control units for use on systems up to 1100 V Specification for direct-on-line motor starters《电压可达1100V的系统用矿山型阻燃式电源和控制装置 第1部分 直接起动器.pdf BS 5126-1-1993 Mining type flameproof supply and control units for use on systems up to 1100 V Specification for direct-on-line motor starters《电压可达1100V的系统用矿山型阻燃式电源和控制装置 第1部分 直接起动器.pdf
  • BS 5126-2-1993 Mining type flameproof supply and control units for use on systems up to 1100 V Specification for circuit breaker units《电压可达1100V的系统用矿山型阻燃式电源和控制装置 第2部分 断路器装置规范》.pdf BS 5126-2-1993 Mining type flameproof supply and control units for use on systems up to 1100 V Specification for circuit breaker units《电压可达1100V的系统用矿山型阻燃式电源和控制装置 第2部分 断路器装置规范》.pdf
  • BS 5126-3-1993 Mining type flameproof supply and control units for use on systems up to 1100 V Specification for air-cooled lighting transformer units《电压可达1100V的系统用矿山型阻燃式电源和控制装置 第3.pdf BS 5126-3-1993 Mining type flameproof supply and control units for use on systems up to 1100 V Specification for air-cooled lighting transformer units《电压可达1100V的系统用矿山型阻燃式电源和控制装置 第3.pdf
  • BS 5126-4-1993 Mining type flameproof supply and control units for use on systems up to 1100 V Specification for air-cooled transformers to power drilling machines《电压可达1100V的系统用矿山型.pdf BS 5126-4-1993 Mining type flameproof supply and control units for use on systems up to 1100 V Specification for air-cooled transformers to power drilling machines《电压可达1100V的系统用矿山型.pdf
  • BS 5127-1974 Specification for polyolefin webbing for divans and bed bases《沙发床和床垫用聚烯烃带规范》.pdf BS 5127-1974 Specification for polyolefin webbing for divans and bed bases《沙发床和床垫用聚烯烃带规范》.pdf
  • BS 5131-0-1990 Methods of test for footwear and footwear materials - General introduction《鞋靴和鞋靴材料试验方法 第0部分 总则》.pdf BS 5131-0-1990 Methods of test for footwear and footwear materials - General introduction《鞋靴和鞋靴材料试验方法 第0部分 总则》.pdf
  • BS 5131-1 1-1991 Methods of test for footwear and footwear materials - Adhesives - Resistance of adhesive joints to heat (creep test)《鞋靴和鞋靴材料试验方法 第1部分 粘合剂 第1节 粘缝耐热性(蠕变试验)》.pdf BS 5131-1 1-1991 Methods of test for footwear and footwear materials - Adhesives - Resistance of adhesive joints to heat (creep test)《鞋靴和鞋靴材料试验方法 第1部分 粘合剂 第1节 粘缝耐热性(蠕变试验)》.pdf
  • BS 5131-1 2-1991 Methods of test for footwear and footwear materials - Adhesives - Resistance of adhesive joints to peeling《鞋靴和鞋靴材料试验方法 第1部分 粘合剂 第2节 粘合缝耐剥离试验》.pdf BS 5131-1 2-1991 Methods of test for footwear and footwear materials - Adhesives - Resistance of adhesive joints to peeling《鞋靴和鞋靴材料试验方法 第1部分 粘合剂 第2节 粘合缝耐剥离试验》.pdf
  • BS 5131-1 3-1991 Methods of test for footwear and footwear materials - Adhesives - Preparation of test assemblies using adhesives (other than hot melt adhesives) for heat resistanc.pdf BS 5131-1 3-1991 Methods of test for footwear and footwear materials - Adhesives - Preparation of test assemblies using adhesives (other than hot melt adhesives) for heat resistanc.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1