DLA A-A-59306 2 B-2012 FUSE CARTRIDGE CLASS T 600 VOLTS AC FAST ACTING.pdf

上传人:roleaisle130 文档编号:687245 上传时间:2018-12-30 格式:PDF 页数:6 大小:63.90KB
下载 相关 举报
DLA A-A-59306 2 B-2012 FUSE CARTRIDGE CLASS T 600 VOLTS AC FAST ACTING.pdf_第1页
第1页 / 共6页
DLA A-A-59306 2 B-2012 FUSE CARTRIDGE CLASS T 600 VOLTS AC FAST ACTING.pdf_第2页
第2页 / 共6页
DLA A-A-59306 2 B-2012 FUSE CARTRIDGE CLASS T 600 VOLTS AC FAST ACTING.pdf_第3页
第3页 / 共6页
DLA A-A-59306 2 B-2012 FUSE CARTRIDGE CLASS T 600 VOLTS AC FAST ACTING.pdf_第4页
第4页 / 共6页
DLA A-A-59306 2 B-2012 FUSE CARTRIDGE CLASS T 600 VOLTS AC FAST ACTING.pdf_第5页
第5页 / 共6页
点击查看更多>>
资源描述

1、AMSC N/A FSC 5920 INCH-POUND A-A-59306/2B 26 April 2012 SUPERSEDING A-A-59306/2A 19 December 2007 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET FUSE CARTRIDGE, CLASS T, 600 VOLTS AC, FAST ACTING The General Services Administration has authorized the use of this commercial item description (CID) fo

2、r all federal agencies. The complete requirements for procuring the fuse cartridges described herein shall consist of this document and the issue in effect of CID A-A-59306. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This commercial item description (CID) specification sheet uses a classifi

3、cation system which is included in the PIN as shown in the following example (see NOTES). AA59306 /02 - 001 CID number Applicable CID specification sheet (two digits) Dash number (see table I) SALIENT CHARACTERISTICS. Interface and physical dimensions. Fuse cartridges supplied to this CID specificat

4、ion sheet shall be as specified herein (see figure 1). Ampere rating. The ampere rating shall be as specified in table I. Voltage rating. The voltage rating shall be 600 V ac, 300 V dc. Interrupting rating. The interrupting rating shall be 200,000 amperes root mean square (RMS) symmetrical for ac op

5、eration and 20,000 amperes for dc operation. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59306/2B 2 AA59306/02 Dimensions A B C 001 through 009 1.500 (38.10) .280 (7.11) .563 (10.30) AA59306/02 Dimensions A B C D E 010 through 014 1.560 (39.6

6、2) .410 (10.41) .812 (20.62) .062 (1.57) .994 (25.25) NOTES: 1. Dimensions are in inches. 2. Tolerance is .005 inch (0.13 mm), unless otherwise specified. FIGURE 1. Configuration and dimensions. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-593

7、06/2B 3 AA59306/02- Dimensions A B C D E F G H J K L 015 through 018 2.953 (75.01) 0.5 (12.7) 0.646 (16.41) 0.250 (21.03) 0.750 (19.05) 0.375 (9.525) 0.125 (3.18) 2.352 (59.74) 0.281 (7.14) 1.640 (41.66) 0.300 (7.62) 019 through 023 3.250 (82.55) 0.5 (12.7) 0.787 (19.99) 1.078 (27.38) 0.875 (22.22)

8、0.437 (11.11) 0.188 (4.78) 2.507 (63.67) 0.344 (8.74) 1.660 (42.16) (0.372) (9.45) 024 through 028 3.625 (92.08) 0.5 (12.7) 0.926 (23.52) 1.625 (41.28) 1.000 (25.40) 0.500 (12.70) 0.250 (6.35) 2.719 (69.06) 0.406 (10.31) 1.730 (43.94) 0.453 (11.51) 029 through 031 3.984 (101.19) 0.5 (12.7) 1.074 (27

9、28) 2.094 (53.19) 1.250 (31.75) 0.625 (15.88) 0.312 (7.92) 2.953 (75.01) 0.484 (12.29) 1.780 (45.21) 0.516 (13.11) 032 through 033 4.328 (109.93) 0.5 (12.7) 1.207 (30.66) 2.516 (63.91) 1.750 (44.45) 0.875 (22.23) 0.375 (9.53) 3.172 (80.57) 0.547 (13.89) 1.875 (47.63) 0.578 (14.68) 034 through 035 5

10、270 (133.90) 2.300 (58.40) 1.441 (36.60) 2.630 (66.80) 2.000 (50.8) 1.000 (25.4) 0.440 (11.2) 3.800 (96.50) 0.609 (15.48) 2.300 (58.40) 0.735 (18.67) NOTES: 1. Dimensions are in inches. 2. Tolerance is .005 inch (0.13 mm), unless otherwise specified. 3. The dashed line represents the limit of the m

11、aximum 1.58 mm (0.063 in.) projection of the screw, rivet head, or the like. FIGURE 2. Configuration and dimensions Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59306/2B 4 TABLE I. Electrical characteristics. CID dash number AA59306/02- Ampere

12、 Rating CID dash number AA59306/02- Ampere rating 001 1 019 110 002 2 020 125 003 3 021 150 004 6 022 175 005 10 023 200 006 15 024 225 007 20 025 250 008 25 026 300 009 30 027 350 010 35 028 400 011 40 029 450 012 45 030 500 013 50 031 600 014 60 032 700 015 70 033 800 016 80 034 1000 017 90 035 11

13、00 018 100 036 1200 NOTES. PIN. The PIN should be used for Government purposes to buy commercial products to this CID specification sheet. See the classification section for PIN format example. Source of documents. Other publications. UNDERWRITERS LABORATORIES, INCORPORATED (UL) UL 248-15 - Low-Volt

14、age Fuses - Part 15: Class T Fuses. (Copies of this document are available online at http:/ or from the Underwriters Laboratories, Incorporated, 333 Pfingsten Road, Northbrook, IL 60062-2096.) (Industry association specifications and standards are generally available for reference from libraries. Th

15、ey are also distributed among technical groups and using Federal agencies.) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59306/2B 5 Commercial products. As part of the market analysis and research effort, this CID specification sheet was coord

16、inated with the following manufacturers of commercial products. At the time of CID specification sheet preparation and coordination, these manufacturers were known to have commercial products that would meet the requirements of this CID specification sheet. (NOTE: This information should not be cons

17、idered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) MFRs CAGE MFRs name and address 71400 Cooper Bussmann, Incorporated P. O. Box 14460 St. Louis, MO 63178-4460 Phone number (636) 394-2877 Facsimile number (800) 544-2570 E-mail: mailto: Uni

18、form Resource Locator (URL): http:/ Part number (P/N) supersession data. These CID specification sheet PINs supersede the following MFRs P/Ns as shown. This information is being provided to assist in reducing proliferation in the Government inventory system. TABLE III. P/N supersession data. CID das

19、h number AA59306/02- (see table I) MFRS CAGE 71400 CID dash number AA59306/02- (see table I) MFRS CAGE 71400 MFRs P/N 1/ MFRs P/N 1/ 001 JJS-1 019 JJS-110 002 JJS-2 020 JJS-125 003 JJS-3 021 JJS-150 004 JJS-6 022 JJS-175 005 JJS-10 023 JJS-200 006 JJS-15 024 JJS-225 007 JJS-20 025 JJS-250 008 JJS-25

20、 026 JJS-300 009 JJS-30 027 JJS-350 010 JJS-35 028 JJS-400 011 JJS-40 029 JJS-450 012 JJS-45 030 JJS-500 013 JJS-50 031 JJS-600 014 JJS-60 032 N/A 015 JJS-70 033 JJS-800 016 JJS-80 034 N/A 017 JJS-90 035 N/A 018 JJS-100 036 N/A 1/ The manufacturers P/N shall not be used for acquisition to the requir

21、ements of this CID specification sheet. At the time of preparation of this CID specification sheet, the aforementioned commercial products were reviewed and could be replaced by the CID PIN shown. For actual part marking requirements, see the marking paragraph of A-A-59306. Provided by IHSNot for Re

22、saleNo reproduction or networking permitted without license from IHS-,-,-A-A-59306/2B 6 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extensiveness of the changes. MILITARY INTERESTS: CIVIL AGENCY COORD

23、INATING ACTIVITY: GSA - FAS Custodians: Navy - EC Preparing activity: DLA - CC DLA-CC Project 5920-2012-018 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • AECMA PREN 6063-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Material Degradation Due to Chemical Products Edition P1《航空航天系列.纤维加固塑料试验方法由于化学物质退化.P1版》.pdf AECMA PREN 6063-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Material Degradation Due to Chemical Products Edition P1《航空航天系列.纤维加固塑料试验方法由于化学物质退化.P1版》.pdf
  • AECMA PREN 6064-1995 Aerospace Series Non-Metallic Materials Analysis of Non-Metallic Materials (Cured) for the Determination of the Extent of Cure by Differential Scanning Calorim.pdf AECMA PREN 6064-1995 Aerospace Series Non-Metallic Materials Analysis of Non-Metallic Materials (Cured) for the Determination of the Extent of Cure by Differential Scanning Calorim.pdf
  • AECMA PREN 6066-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Tensile Strength of a Tapered and Stepped Joints Edition P1《航空航天系列.纤维加固塑料测试放大拉伸强度锥形接口.P.pdf AECMA PREN 6066-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Tensile Strength of a Tapered and Stepped Joints Edition P1《航空航天系列.纤维加固塑料测试放大拉伸强度锥形接口.P.pdf
  • AECMA PREN 6067-2000 Aerospace Series Pin Quick Release Self-Retaining Positive Locking Double Acting Button Handle Edition P 2《航空航天系列.栓快速释放自我保护阳极锁双钮扣手柄.P2版》.pdf AECMA PREN 6067-2000 Aerospace Series Pin Quick Release Self-Retaining Positive Locking Double Acting Button Handle Edition P 2《航空航天系列.栓快速释放自我保护阳极锁双钮扣手柄.P2版》.pdf
  • AECMA PREN 6068-2000 Aerospace Series Pin Quick Release Self-Retaining Positive Locking Single Acting Button Handle Edition P 2《航空航天系列.栓快速释放自我保护阳极锁单钮扣手柄.P2版》.pdf AECMA PREN 6068-2000 Aerospace Series Pin Quick Release Self-Retaining Positive Locking Single Acting Button Handle Edition P 2《航空航天系列.栓快速释放自我保护阳极锁单钮扣手柄.P2版》.pdf
  • AECMA PREN 6069-2008 Aerospace series Rivet 100 Degrees reduced flush head close tolerance Inch series Edition P 3《航空航天系列.紧公差100°缩减埋头铆钉.英制系列.版本P3》.pdf AECMA PREN 6069-2008 Aerospace series Rivet 100 Degrees reduced flush head close tolerance Inch series Edition P 3《航空航天系列.紧公差100°缩减埋头铆钉.英制系列.版本P3》.pdf
  • AECMA PREN 6070-1998 Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification General Requirements Edition P 1《航空航天系列.铝和铝合金锻造产品技术规范总则.P1版》.pdf AECMA PREN 6070-1998 Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification General Requirements Edition P 1《航空航天系列.铝和铝合金锻造产品技术规范总则.P1版》.pdf
  • AECMA PREN 6071-1998 Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Plate Edition P 1《航空航天系列.铝和铝合金锻造产品技术规范金属板.P1版》.pdf AECMA PREN 6071-1998 Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Plate Edition P 1《航空航天系列.铝和铝合金锻造产品技术规范金属板.P1版》.pdf
  • AECMA PREN 6073-1998 Aerospace Series Metallic Materials Aluminium and Aluminium Alloys Test Methods Drop Test Edition P 1《航空航天系列.金属物质铝和铝合金试验方法测试.P1版》.pdf AECMA PREN 6073-1998 Aerospace Series Metallic Materials Aluminium and Aluminium Alloys Test Methods Drop Test Edition P 1《航空航天系列.金属物质铝和铝合金试验方法测试.P1版》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1