1、 A-A-59307 m 9038054 0003696 465 m METRJCI A-A-59307 9 October 1998 SUPERSEDING 10 April 1991 W-S-564C COMMERCIAL ITEM DESCRIPTION SOLDERING GUNS, ELECTRIC The General Services Administration has authorized the use of this commercial item description for all federal agencies. 1. SCOPE. This commerci
2、al item description covers hand held, electric powered, conduction soldering devices using on demand current consumption and accessories specified herein. 2. CLASSIFICATION. This commercial item description covers soldering guns of the following type, style, class, and heat level. 2.1 Tm. Type refer
3、s to the type of-the element on the soldering gun. The types of soldering guns are as follows: Type I - Wire tip (transformer) Type II - Solid tip 2.2 Stvle. Style refers to the handle of the soldering gun. The styles of soldering guns are as follows: Style A - Pistol grip handle StyleB - Pencilhand
4、le 2.3 Class. Class refers to the number of switch positions on the soldering gun. The class of soldering are as follows: Class 1 - Single switch position Class 2 - Dual switch position Beneficial comment, recommendations, deletions, clarifications, etc., and any data which may improve this document
5、 should be sent to: Defense Supply Center Richmond, ATTN: DSCR- VBD, Richmond, VA 23297-5610. AMSC N/A FSC 3439 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5930
6、7 m OL054 0003b97 3TL m A-A-59307 2.4 Heat level. Heat level classifies the operating output of the soldering gun by wattage. Heat levels are as follows: Heat level A - Less than 150 Watts (W) Heat level B - Between 150W and 300W Heat level C - More than 300W 3. SALIENT CHARACTERISTICS 3.1 Design. T
7、he soldering gun shall consist of a self-contained unit with attachments for general purpose soldering as described herein. 3.1.1 Options. When specified (see 7.4), the soldering guns shall include the following options. 3.1.1.2 Illumination. Illuminating soldering guns shall illuminate the tip area
8、. Lamps shall be replaceable without the use of special tools. 3.1.1.3 Battery operation. Battery operated soldering guns shall be rechargeable and include the battery. Recharging equipment shall be included with the soldering gun, and may be an integral part of the soldering gun. 3.1.1.4 Soldering
9、gun kit. Unless otherwise specified (see 7.4), Soldering guns kit shall include a reusable case, and at least three soldering tips. Type I soldering gun tips shall include a general soldering tip, a smoothing tip, and a cutting tip. Type II soldering guns tips shall include a general soldering tip,
10、a pointed or cone tip, and a chisel tip. 3.2 Controls. The soldering gun shall have a momentary switch to control output. All controls shall be located in a position convenient to the operator and in the operators plain view. 3.3 Warm-up time. The warm-up time to reach operating temperature for gene
11、ral purpose soldering from initial power on shall not exceed 15 seconds. 3.4 Power requirements. Unless otherwise specified (see 7.4), the soldering gun power requirements shall be 120 Vac 60 Hz single phase and shall not exceed 3 amps. Power cord shall be either 2-wire polarized or 3-wire grounding
12、 type. 3.5 Soldering tim and elements. All soldering tips and elements shall be replaceable without the use of special tools. Special purpose tips and elements shall be as specified (see 7.4). 3.6 Safetv reauirements. The soldering gun shall meet requirements of, “UL Standard for Safety for Electric
13、 Heating Appliances, UL 499.” 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59307 4. REGULATORY REQUIREMENTS 4.1 Recovered materials. The offerorkontractor is encouraged to use recovered materials to the maximum extent practicable, in accorda
14、nce with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.2 Environmental Protection. During the manufacture of the soldering guns, materiais hazardous to the ecological systems and as prohibited by the federal, state or local statutes in effect on the date of the contract shall not b
15、e used and shall not be emitted. 5. QUALITY ASSURANCE PROVISIONS 5.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item description and shall conform to the drawings, specifications, standards and quality assurance practices of producer and also
16、 shall be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance. 6. PACKAGING. Preservation, packing, and marlung shall be as specified in the contract or order. 7. NOTES 7.1 Part identification number (PIN). The following
17、part identification numbering procedure is for government purposes and does not constitute a requirement for the contractof A-A- - 1307 - 1 A - - A i Heatlevel A - Heat level A - Less than 150W B - Heat level B - Between 150W and 300W C - Heat level C - More than 300W Class - 1 - Class1 2- Class2 Ty
18、pe 1- Type1 CID Number - Single switch position - Duel switch position - Pistol grip handle - Pencil handle - Wire tip (transformer) 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59307 7.2 National stock numbers (NSNs). The following NSNs cor
19、respond to this CID. The list is not indicative of all possible NSNs associated with this document. NSN - PIN 3439-00-004-091 5 A-59307 - 2A1B 3439-00-61 8-6623 A-59307 - 1A2B 3439-00-930-1 639 A-59307 - 1A1C 3439-01-289-648 1 A-59307 - 2B2C 3439-01-329-5443 A-59307 - 2A1B 7.3 Intended use. Solderin
20、g guns covered by this commercial item description are for general purpose soldering or maintenance. 7.4 Ordering: data. Purchasers should select the preferred options and include the following information in the order. a. b. d. e. f. g- h. C. Title, number, and date of this specification. Type, sty
21、le, class and heat level required. (see 2.) Attachments for soldering, if required. (see 3. i) Optional equipment, if required. (see 3.1. i) Soldering gun kit options, if different. (see 3.1.1.4) Power requirements, if different. (see 3.4) Special purpose tips or elements, if required. (see 3.5) Pre
22、servation, packing, and marking as required. (see 6.) 7.5 Referenced documents. 7.5.1 FED-STD-376, Preferred Metric Units for General Use by the Federal Government, is available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19 1 1 1-5094, Telephone 8
23、00-225-3 842. 7.5.2 The Federal Acquisition Regulation (FAR) may be obtained from the Superintendent of Dcuments, U.S. Government Printing Office, Washington, DC 20402. 7.5.3 UL 499, UL Standard for Safety for Electric Heating Appliances, is available from Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado . MILITARY INTERESTS: custodians Army-& Navy - SH Air Force - 99 PREPARING ACTIVITY DLA - GS (Project 3439-0909) 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
