1、AMSC N/A 1 of 5 FSC 5320DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.INCH-POUNDA-A-5943120 APRIL 1999COMMERCIAL ITEM DESCRIPTIONRIVETS, BLIND, NONSTRUCTURAL, RETAINED MANDREL,CLOSED-END, 120o COUNTERSUNK HEAD, ALUMINUM ALLOYThis General Services Administration has
2、 authorized the use of this Commercial Item Description forall Federal agencies.1. SCOPE: This Commercial Item Description (CID) covers the requirements for pull-stem expandable blindrivets. These rivets are intended for rapid and permanent non-structural fastening applications in which accessis ava
3、ilable to one side only.2. SALIENT CHARACTERISTICS:2.1 Blind rivets furnished under this CID shall conform to the materials, strengths, and dimensions as specified inTable I, II, and III and as shown in Figure 1 below.FIGURE 1. RIVETSBENEFICIAL COMMENTS, RECOMMENDATIONS, ADDITIONS, DELETIONS, CLARIF
4、ICATIONS,ETC., AND DATA WHICH MAY IMPROVE THIS DOCUMENT SHOULD BE SENT TO: DEFENSEINDUSTRIAL SUPPLY CENTER, ATTN: DISC-AEEB, 700 ROBBINS AVENUE, PHILADELPHIA, PA19111-5096.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-594312TABLE I. MATERIAL CO
5、MBINATION SYMBOLS AND STRENGTHSSYMBOL MATERIAL COMBINATION RIVETDIAMINIMUMSHEARLOADLBSMINIMUMTENSIONLOADLBSHOLLOW COREA Body: 5056 Al Alloy(UNS A95056)Mandrel: 1012-1025 Steel(UNS G10120-G10250)1045-1075 Steel(UNS G10450-G10750).125.156.188305430575385605840FILLED COREABody: 5056 Al Alloy(UNS A95056
6、)Mandrel: 1012-1025 Steel(UNS G10120-G10250)1045-1075 Steel(UNS G10450-G10750).125.156.188480590890280480840TABLE II. BASIC DIMENSIONSBASIC DIMENSIONSNOMDIA D HEREFRMAXWREFRECOMMENDEDHOLE SIZE.125 .128.124.245.221.035 .025 .064 .129-.133.156 .159.155.327.297.050 .025 .086 .160-.164.188 .191.186.395.
7、355.060 .025 .104 .192-.196Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-594313ABLE III. DASH NUMBERS AND DIMENSIONSMATERIAL COMBINATIONSHOLLOW COREAFILLED COREAL PMINRECOMMENDEDGRIP RANGEA401HA402HA403HA404HA405HA401FA402FA403F.257-.297.321-.3
8、61.382-.422.446-.486.508-.5481.00.031-.062.063-.125.126-.187.188-.250.251-.312A502HA503HA505HA502FA503FA505F.350-.390.412-.452.538-.5781.06.063-.125.126-.187.251-.312A602HA604HA606HA602FA604FA606F.375-.415.500-.540.625-.6651.06.063-.125.126-.250.251-.375Provided by IHSNot for ResaleNo reproduction o
9、r networking permitted without license from IHS-,-,-A-A-5943142.2 Materials shall be of the type and grade specified in Table I.2.3 Workmanship. Rivets shall be of uniform quality and free from injurious seams and other injurious defects.2.4 Single shear load. The shear test shall be performed in ac
10、cordance with Test Method 20 of NASM1312, orequivalent and shall conform to the data specified in Table I.2.5 Tension load. The tension test shall be performed in accordance with Test Method 8 of NASM1312, orequivalent and shall conform to the data specified in Table I.2.6 Packaging requirements The
11、 requirements for packaging shall be in accordance with ASTM D3951.3. QUALITY ASSURANCE PROVISIONS.3.1 Product conformance. The products provided shall meet the salient characteristics of this commercial itemdescription, conform to the producers own drawings, specifications, standards, and the quali
12、ty assurance practices,and be the same product offered for sale in the commercial market. The government reserves the right to requireproof of such conformance.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5943154. NOTES4.1 All dimensions are i
13、n inches.4.2 The part number shall consist of the basic Commercial Item Description Number followed by a dash numberfrom Table III. The dash number consists of a material combination symbol from Table I, a nominal bodydiameter size code in thirty-seconds of an inch from Table II, a maximum grip code
14、 in sixteenths of an inch fromTable III, and a core style code from Table III.EXAMPLE: AA59431 A 6 06 HCore StyleGrip Range CodeNominal diameterMaterialCommercial Item Description NumberAA59431A606H Indicates - Rivet, blind, nonstructural, retainedmandrel, closed-end, 120o countersunk head,5056 (UNS
15、 A95056) aluminum alloy body,C1012-C1025 (UNS G10120-G10250) orC1045-C1075 (UNS G10450-G10750) steelmandrel; nominal body diameter size, .188;grip range, .251-.375, style; hollow core.Military Interests:Custodians: Preparing Activity:Army - AR DLA-ISNavy - ASAir Force - 99Review Activities: (Project
16、 No. 5320-0960)Army - AV, MIAir Force - 11, 82National Security Agency-NSProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARDIZATION DOCUMENT IMPROVEMENT PROPOSALINSTRUCTIONS1. The preparing activity must complete blocks 1, 2, 3 and 8. In block 1
17、, both the document number and revision letter should be given.2. The submitter of this form must complete blocks 4, 5, 6 and 7.3. The preparing activity must provide a reply within 30 days from receipt of the form.NOTE: This form may not be used to request copies of documents, or to request waivers
18、, or clarification of requirements on current contracts.Comments submitted on this form do not constitute or imply authorization to waive any portion of the referenced document(s) or to amend contractual.I RECOMMEND A CHANGE: 1. DOCUMENT NUMBERA-A-594312. DOCUMENT DATE (YYMMDD)9904203. DOCUMENT TITL
19、E:RIVETS, BLIND, NONSTRUCTURAL, RETAINED MANDREL, CLOSED-END, 120o COUNTERSUNK HEAD,ALUMINUM ALLOY4. NATURE OF CHANGE5. REASON FOR RECOMMENDATION6. SUBMITTERa. NAME (Last, First, Middle Initial) b. ORGANIZATIONc. ADDRESS (Include Zip Code) d. TELEPHONE (Include Area Code)(1) Commercial(2) AUTOVON (I
20、f applicable)7. DATE SUBMITTED (YYMMDD)8. PREPARING ACTIVITY DLA-ISa. NAMEEmelia Altomarib. TELEPHONE (Include Area Code)(1) Commercial (215) 697-6827(2) (DSN) 442-6827c. ADDRESS (Include Zip Code)Defense Industrial Supply Center700 Robbins AvenueBldg. 3 (Code DISC-AESD)Philadelphia, PA 19111-5096IF
21、 YOU DO NOT RECEIVE A REPLY WITHIN 45 DAYS, CONTACT:Defense Quality and Standardization Office5203 Leesburg Pike, Suite 1403Falls Church, VA 22041TELEPHONE (703) 756-2340 AUTOVON 289-2340DD Form 1426, OCT 89 Previous editions are obsolete. 198/290Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
