DLA A-A-59494 3-2010 WHEEL PNEUMATIC TIRE 4 00-8.pdf

上传人:deputyduring120 文档编号:687463 上传时间:2018-12-30 格式:PDF 页数:4 大小:98.16KB
下载 相关 举报
DLA A-A-59494 3-2010 WHEEL PNEUMATIC TIRE 4 00-8.pdf_第1页
第1页 / 共4页
DLA A-A-59494 3-2010 WHEEL PNEUMATIC TIRE 4 00-8.pdf_第2页
第2页 / 共4页
DLA A-A-59494 3-2010 WHEEL PNEUMATIC TIRE 4 00-8.pdf_第3页
第3页 / 共4页
DLA A-A-59494 3-2010 WHEEL PNEUMATIC TIRE 4 00-8.pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、INCH-POUND A-A-59494/3 28 April 2010 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET WHEEL, PNEUMATIC TIRE, 4.00-8 The General Services Administration has authorized the use of this commercial item description for all federal agencies. The complete requirements for procuring wheels and tires describ

2、ed herein shall consist of this document and the issue in effect of A-A-59494. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This commercial item description (CID) specification sheet uses a classification system which is included in the PIN as shown in the following example (see NOTES). AA594

3、94 /03 - 001 CID number Applicable CID specification sheet (two digits) Dash number (see figure 1) SALIENT CHARACTERISTICS. Interface and physical dimensions. Wheels and tires supplied to this CID specification sheet shall be as specified herein (see figure 1). FIGURE 1. Wheel, pneumatic tire, 4.00-

4、8. AMSC N/A FSC 2530 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59494/3 2 Dash number Material 001 Steel 002 Aluminum alloy Inches mm Inches mm 0.17 4.3 0.62 15.7 0.1196 3.0 0.625 15.9 0.125 3.2 0.81 20.6 0.25 6.4 1.875 47.6 0.35 8.9 3.375 8

5、5.7 0.375 9.5 3.75 95.3 0.406 10.3 4.5 114.3 0.44 11.2 6.5 165.1 0.531 13.5 7.968 202.4 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. This shall be a demountable type wheel which can be removed from the hub without deflating the tire. 4. Wheels shall fi

6、t hubs specified in A-A-59494/6 and A-A-59494/8. FIGURE 1. Wheel, pneumatic tire, 4.00-8 Continued. NOTES. PIN. The PIN should be used for Government purposes to buy commercial products to this CID specification sheet. See the classification section for PIN format example. Source of documents. Comme

7、rcial Item Descriptions A-A-59494 - Wheels and Hubs for Industrial Pneumatic Tires (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094). Commercial produc

8、ts. As part of the market analysis and research effort, this CID specification sheet was coordinated with the following manufacturers of commercial products. At the time of CID specification sheet preparation and coordination, these manufacturers were known to have commercial products that would mee

9、t the requirements of this CID specification sheet. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-

10、A-A-59494/3 3 MFRs CAGE MFRs name and address 52793 Saginaw Products Corporation 68 Williamson St. Saginaw, MI 48601-3246 Phone: 989-753-1411 Fax: 989-753-4386 http:/ 56190 Metadure Parts & Sales Inc. 165 Gazza Blvd. Farmingdale, NY 11735 Phone: 631-249-2141 Fax: 631-249-4546 OW357 PDI Ground

11、Support Systems Inc. 5905 Grant Ave. Cleveland, OH 44515-5609 Phone: 216-271-7344 Fax: 216-271-7550 davidrpdi- http:/www.pdi- Part number (P/N) supersession data. These CID specification sheet PINs supersede the following MFRs P/Ns as shown (see table I). This information is being provided to assist

12、 in reducing proliferation in the Government inventory system. TABLE I. P/N supersession data. Dash number (see figure 1) A-A-59494/3 MFRs CAGE MFRs P/N 1/ MFRs CAGE MFRs P/N 1/ MFRs CAGE MFRs P/N 1/ 001 52793 10302 56190 N/A OW357 N/A 002 52793 N/A 56190 N/A OW357 N/A 1/ The manufacturers P/N shall

13、 not be used for procurement to the requirements of this CID specification sheet. At the time of preparation of this CID specification sheet, the aforementioned commercial products were reviewed and could be replaced by the CID PIN shown. For actual part marking requirements, see the marking paragra

14、ph of A-A-59494. National stock number (NSN). The following is a list of NSNs assigned which correspond to this CID specification sheet. The list is for information only and may not be indicative of all possible NSNs associated with the CID specification sheet. For up to date information on assigned

15、 NSNs, please contact the aforementioned DSCC office listed in A-A-59494 (see table II). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59494/3 4 TABLE II. NSNs. Dash number (see figure1) A-A-59494/3 NSN 001 2530-00-882-4784 002 N/A MILITARY INT

16、ERESTS: CIVIL AGENCY AND COORDINATING ACTIVITY: Custodians: GSA - FAS Army - AT Air Force - 99 Preparing activity: DLA CC DLA - CC Review activity: Project 2530-2009-003 Air Force - 84 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • DIN EN 408-2012 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties German version EN 408 2010+A1 2012《木材结构 .pdf DIN EN 408-2012 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties German version EN 408 2010+A1 2012《木材结构 .pdf
  • DIN EN 4084-2010 Aerospace series - Nuts anchor self-locking fixed two lug with counterbore in alloy steel cadmium plated MoS lubricated - Classification 1100 MPa (at ambient tempe.pdf DIN EN 4084-2010 Aerospace series - Nuts anchor self-locking fixed two lug with counterbore in alloy steel cadmium plated MoS lubricated - Classification 1100 MPa (at ambient tempe.pdf
  • DIN EN 4085-2002 Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing Amorphous foil German version EN 4085 2001《航空航天系列 镍基合金NI-B40002 (NiSi4B2) 硬钎焊填充.pdf DIN EN 4085-2002 Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing Amorphous foil German version EN 4085 2001《航空航天系列 镍基合金NI-B40002 (NiSi4B2) 硬钎焊填充.pdf
  • DIN EN 409-2009 Timber structures - Test methods - Determination of the yield moment of dowel type fasteners English version of DIN EN 409 2009-08《木材构件的试验方法 榫型紧固件屈服力矩的测定 英文版本DIN EN.pdf DIN EN 409-2009 Timber structures - Test methods - Determination of the yield moment of dowel type fasteners English version of DIN EN 409 2009-08《木材构件的试验方法 榫型紧固件屈服力矩的测定 英文版本DIN EN.pdf
  • DIN EN 4098-2007 Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted hardened and tempered forgings D ≤ 50 mm 1250 MPa ≤ R ≤ 1400 MPa German and English version EN 4098 2007《.pdf DIN EN 4098-2007 Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted hardened and tempered forgings D ≤ 50 mm 1250 MPa ≤ R ≤ 1400 MPa German and English version EN 4098 2007《.pdf
  • DIN EN 4099-2005 Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0 5 mm a 6 mm German and English version EN 4099 2005《航空航天系列 铝合金AL-P2219-T6或T62 涂覆薄板.pdf DIN EN 4099-2005 Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0 5 mm a 6 mm German and English version EN 4099 2005《航空航天系列 铝合金AL-P2219-T6或T62 涂覆薄板.pdf
  • DIN EN 410-2011 Glass in building - Determination of luminous and solar characteristics of glazing German version EN 410 2011《建筑玻璃 对建筑玻璃的发光特性和光辐射特性的测定 德文版本EN 410-2011》.pdf DIN EN 410-2011 Glass in building - Determination of luminous and solar characteristics of glazing German version EN 410 2011《建筑玻璃 对建筑玻璃的发光特性和光辐射特性的测定 德文版本EN 410-2011》.pdf
  • DIN EN 4100-2006 Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0 5 mm a 6 mm German and English version EN 4100 2005《航空航天系列 铝合金AL-P2219-T6或T62 薄板材和带材 0 .pdf DIN EN 4100-2006 Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0 5 mm a 6 mm German and English version EN 4100 2005《航空航天系列 铝合金AL-P2219-T6或T62 薄板材和带材 0 .pdf
  • DIN EN 4101-2006 Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0 4 mm a 6 mm German and English version EN 4101 2005《航.pdf DIN EN 4101-2006 Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0 4 mm a 6 mm German and English version EN 4101 2005《航.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1