1、INCH-POUND A-A-59494/5A 14 January 2013 SUPERSEDING A-A-59494/5 28 May 2010 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET WHEEL, PNEUMATIC TIRE, 7.50-10 or 9.00-10 The General Services Administration has authorized the use of this commercial item description for all federal agencies. The complete
2、requirements for procuring wheels and tires described herein shall consist of this document and the issue in effect of A-A-59494. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This commercial item description (CID) specification sheet uses a classification system which is included in the PIN a
3、s shown in the following example (see NOTES). AA59494 /05 - 001 CID number Applicable CID specification sheet (two digits) Dash number (see figure 1) SALIENT CHARACTERISTICS. Interface and physical dimensions. Wheels and tires supplied to this CID specification sheet shall be as specified herein (se
4、e figure 1). AMSC N/A FSC 2530 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59494/5A 2 Inches mm Inches mm 0.005 0.010 0.015 0.016 0.020 0.030 0.060 0.070 0.1495 0.170 0.1875 0.340 0.350 0.500 0.13 0.25 0.38 0.41 5.51 0.76 1.52 1.78 3.80 4.32
5、4.76 8.63 8.89 12.70 0.516 0.531 0.540 0.572 0.576 0.625 0.875 1.188 1.375 2.750 4.00 5.500 8.000 9.968 13.11 13.49 13.72 14.83 14.63 15.88 22.23 30.18 34.93 69.85 101.6 139.70 203.20 253.19 Dash number Material 001 Steel 002 Aluminum alloy FIGURE 1. Wheel, pneumatic tire, 7.50-10 or 9.00-10. Provid
6、ed by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59494/5A 3 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. This shall be a demountable type wheel which can be removed from the hub without deflating the tire.
7、 4. Wheels shall fit hubs specified in A-A-59494/7 and A-A-59494/9. FIGURE 1. Wheel, pneumatic tire, 7.50-10 or 9.00-10 - Continued. NOTES. PIN. The PIN should be used for Government purposes to buy commercial products to this CID specification sheet. See the classification section for PIN format ex
8、ample. Source of documents. Commercial Item Descriptions A-A-59494 - Wheels and Hubs for Industrial Pneumatic Tires A-A-59494/7 - Hub Assembly, Cantilever Mounting, for 6.00-9, 7.50-10, and 9.00-10 A-A-59494/9 - Hub Assembly, Fork Mounting, for 6.00-9 and 7.50-10 Wheels (Copies of these documents ar
9、e available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094). Commercial products. As part of the market analysis and research effort, this CID specification sheet was coordinated with the foll
10、owing manufacturers of commercial products. At the time of CID specification sheet preparation and coordination, these manufacturers were known to have commercial products that would meet the requirements of this CID specification sheet. (NOTE: This information should not be considered as a list of
11、approved manufacturers or be used to restrict procurement to only the manufacturers shown.) MFRs CAGE MFRs name and address 52793 Saginaw Products Corporation 68 Williamson St. Saginaw, MI 48601-3246 Phone: 989-753-1411 Fax: 989-753-4386 http:/ 56190 Metadure Parts & Sales Inc. 165 Gazza Blvd. Farm
12、ingdale, NY 11735 Phone: 631-249-2141 Fax: 631-249-4546 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59494/5A 4 MFRs CAGE MFRs name and address 0W357 PDI Ground Support Systems Inc. 5905 Grant Ave. Cleveland, OH 44515-5609 Phone: 216-271-7344
13、 Fax: 216-271-7550 davidrpdi- http:/www.pdi- Part number (P/N) supersession data. These CID specification sheet PINs supersede the following MFRs P/Ns as shown (see table I). This information is being provided to assist in reducing proliferation in the Government inventory system. TABLE I. P/N super
14、session data. Dash number (see figure 1) A-A-59494/5 MFRs CAGE MFRs P/N 1/ MFRs CAGE MFRs P/N 1/ MFRs CAGE MFRs P/N 1/ 001 52793 6407 56190 N/A OW357 N/A 002 52793 N/A 56190 N/A OW357 N/A Dash number (see figure 1) A-A-59494/5 MS24326 001 -1 002 -2 1/ The manufacturers P/N shall not be used for proc
15、urement to the requirements of this CID specification sheet. At the time of preparation of this CID specification sheet, the aforementioned commercial products were reviewed and could be replaced by the CID PIN shown. For actual part marking requirements, see the marking paragraph of A-A-59494. Nati
16、onal stock number (NSN). The following is a list of NSNs assigned which correspond to this CID specification sheet. The list is for information only and may not be indicative of all possible NSNs associated with the CID specification sheet. For up to date information on assigned NSNs, please contact
17、 the aforementioned DSCC office listed in A-A-59494 (see table II). TABLE II. NSNs. Dash number (see figure1) A-A-59494/5 NSN 001 2530-00-590-2680 002 N/A Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the e
18、xtensiveness of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59494/5A 5 MILITARY INTERESTS: CIVIL AGENCY AND COORDINATING ACTIVITY: Custodians: GSA - FAS Army - AT Air Force - 99 Preparing activity: DLA CC DLA - CC Review activity
19、: Project 2530-2012-003 Air Force - 84 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
