1、Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data that may improve this document should be sent to: DLA Land and Maritime, Columbus, ATTN: VAT, P.O. Box 3990, Columbus, OH 43218-3990, or email mailto:CircuitProtectdscc.dla.mil. Since contact information c
2、an change you may want to verify the currency of the address information using the ASSIST Online database at https:/assist.daps.dla.mil. AMSC N/A FSC 6135 INCH-POUND A-A-59499B 15 October 2011 SUPERSEDING A-A-59499A 21 June 2006 COMMERCIAL ITEM DESCRIPTION BATTERY, DRY, BA-59 The General Services Ad
3、ministration has authorized the use of this commercial item description for all federal agencies. 1. SCOPE. This commercial item description (CID) covers the general requirements for a +45 V dc dry-cell battery. This battery is intended for use in commercial/industrial applications such as test equi
4、pment, radio sets, and other portable electronic and communication equipment powered by non-rechargeable dry cell batteries. 2. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This CID uses a classification system which is included in the Part or Identification Number (PIN). The PIN shall be AA5
5、9499 (see 7.1). 3. SALIENT CHARACTERISTICS. 3.1 Interface and physical dimensions. Batteries supplied to this CID shall be as specified herein and shall meet the requirements of NEMA C18.1M Part 1 (see figure 1). 3.2 Voltage. The battery shall provide a nominal voltage of +45 V dc. 3.3 Weight. The b
6、attery weight shall not exceed 2 pounds, 2 ounces. 3.4 Terminal. type. The terminal shall consist of a 5-hole socket. 3.5 Cell type. Cells shall meet the requirements of ANSI Number 15A, 15D, 15F or 15M of NEMA C18.1M, Part 1. 3.6 Dimensions. The battery shall meet the dimensional requirements shown
7、 in figure 1. 3.7 Marking. Batteries supplied to this CID shall be marked with the manufacturers (MFRs) standard commercial PIN. (NOTE: The part number marked on the unit pack shall be the CID PIN.) 3.8 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environment
8、ally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. 3.9 Workmanship. Batteries shall be processed in such a manner as to be uniform i
9、n quality and shall be free from other defects that will affect life, serviceability, or appearance. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59499B 2 FIGURE 1. Interface and physical dimensions. Provided by IHSNot for ResaleNo reproductio
10、n or networking permitted without license from IHS-,-,-A-A-59499B 3 Ltr Inches mm Min Max Min Max A .438 - 11.13 - B 5.375 5.501 136.53 139.73 C .472 .598 11.99 15.19 D 1.125 1.251 28.56 31.78 E 3.406 3.594 86.51 91.29 F .796 .922 20.22 23.43 G 1.625 1.813 41.28 46.05 NOTES: 1. Dimensions are in Inc
11、hes. 2. Unless otherwise specified, tolerance is 0.063 inch (1.59 mm). FIGURE 1. Interface and physical dimensions - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59499B 4 4. REGULATORY REQUIREMENTS. The offeror/contractor is encoura
12、ged to use recovered materials to the maximum extent practicable, in accordance with 23.403 of the Federal Acquisition Regulation (FAR). 5. PRODUCT CONFORMANCE PR0OVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of this CID, conform to the producers own
13、 drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. 6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or
14、order. 7. NOTES. 7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See section 2 for PIN format example. 7.2 Environmentally preferable material. Environmentally preferable materials should be used to the maximum extent possible to meet the requirements
15、of this specification. As of the dating of this document, the U.S. Environmentally Protection Agency (EPA) is focusing efforts on reducing 31 priority chemicals. The list of chemicals and additional information is available on their website http:/www.epa.gov/osw/hazard/wastemin/priority.htm. Include
16、d in the EPA list of 31 priority chemicals are cadmium, lead, and mercury. Use of these materials on the list should be minimized or eliminated unless needed to meet the requirements specified herein (see Section 3). 7.3 Commercial and Government Entity (CAGE) code. For ordering purposes, inventory
17、control, and submission of these batteries to DLA Land and Maritime under the Military Parts Control Advisory Group (MPCAG) evaluation program, CAGE code 58536 should be used. 7.4 Source of documents. FEDERAL REGULATIONS FAR - Federal Acquisition Regulations (FAR). (Copies of this document are avail
18、able online at http:/www.acquisition.gov/comp/far/index.html from the U.S. Government Printing Office, 732 North Capital Street, NW, Washington D.C. 20401-0001.) Other Publications NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA) NEMA C18.1M PART 1 - Portable Primary Cells and Batteries with Aqu
19、eous Electrolyte. (Copies of this document are available online at http:/www.nema.org/ or from the National Electrical Manufacturers Association, 1300 North 17thStreet, Rosslyn, Virginia 22209-3811). (Industry association specifications and standards are generally available for reference from librar
20、ies. They are also distributed among technical groups and using Federal agencies.) 7.5 Ordering data. The contract or order should specify the following: a. CID document number, revision, and CID PIN. b. Product conformance provisions. c. Packaging requirements. Provided by IHSNot for ResaleNo repro
21、duction or networking permitted without license from IHS-,-,-A-A-59499B 5 7.6 Commercial products. As part of the market analysis and research effort, this CID was coordinated with the following manufacturers of commercial products. At the time of CID preparation and coordination, these manufacturer
22、s were known to have commercial products that would meet the requirements of this CID. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) MFRs CAGE MFRs name and address 51828 Bren-Tronics Incorpor
23、ated 10 Brayton Court Commack, NY 11725-3197 Phone number: (631) 499-5155 Facsimile number (631) 499-5504 E-mail: mailto: Uniform Resource Locator (URL): 7.7 Part number (P/N) supersession data. These CID PINs supersede the following MFRs P/Ns as shown. This information is being provided to assist
24、in reducing proliferation in the Government inventory system. TABLE II. P/N supersession data. CID PIN MFRs P/N 1/ CAGE 51828 AA59499 BT-70659 1/ The manufacturers P/N shall not be used for acquisition to the requirements of this CID. At the time of preparation of this CID, the aforementioned commer
25、cial products were reviewed and could be replaced by the CID PIN shown. For actual part marking requirements see 3.7. 7.8 Government users. To acquire information on obtaining these batteries from the Government inventory system, contact DLA Land and Maritime, ATTN: FLC, Post Office Box 3990, Columb
26、us, OH 43218-3990, or telephone (614) 692-3342. 7.8.1 National stock number (NSN). The following is a list of NSNs assigned which correspond to this CID. The list is for information only and may not be indicative of all possible NSNs associated with the CID. For up to date information on assigned NS
27、Ns, please contact the aforementioned DLA Land and Maritime office (See 7.7). TABLE III. NSNs. CID PIN (see section 2) NSN AA59499 6135-00-120-1032 7.9 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the exte
28、nsiveness of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59499B 6 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - FAS Custodians: Army - CR Preparing activity: Navy - SH DLA - CC DLA - CC Review Activities: Project
29、6135-2011-007 Army - AV, MI Navy - MC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
