1、AMSC N/A FSC 4710 INCH-POUND A-A-59512A 9 December 2013 SUPERSEDING A-A-59512 29 October 1999 COMMERCIAL ITEM DESCRIPTION TUBE, METALLIC, SEAMLESS - COBALT ALLOY (1 INCH O.D.) The General Services Administration has authorized the use of this commercial item description for all federal agencies. 1.
2、SCOPE. This commercial item description (CID) covers the general requirements for tube, metallic, seamless - cobalt alloy (1 inch OD). Tube, metallic, seamless - cobalt alloy (1 inch OD) covered by this CID are intended for commercial/industrial applications. 2. CLASSIFICATION/PART OR IDENTIFICATION
3、 NUMBER (PIN). This CID uses a classification system which is included in the PIN as shown in the following example (see 7.1). AA52047 - 001 CID number Length Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data that may improve this document should be sent
4、to: DLA Land and Maritime, ATTN: VAI, P.O. Box 3990, Columbus OH 432183990, or email fluidflow.dla.mil. Since contact information can change you may want to verify the currency of the address information using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo repro
5、duction or networking permitted without license from IHS-,-,-A-A-59512A 2 3. SALIENT CHARACTERISTICS. 3.1 Interface and physical dimensions. Tube, metallic, seamless - cobalt alloy (1 inch OD) supplied to this CID shall be as specified herein. 3.2. Material and fnish. Tube material shall be solution
6、 heat treated cobalt alloy metallic, as specified in accordance with UNS R30605 (L-605). 3. 2.1 Design, construction, and performance. Round seamless cobalt alloy tube with good design, construction and performance as used in the associated industry. 3.2.1.1 Outside diameter and wall thickness. The
7、outside diameter is 1.00 0.005 inch, wall thickness is 0.049 0.005 inch, and supplied in random lengths. 3.3 Marking. Tube, metallic, seamless - cobalt alloy (1 inch OD) supplied to this CID shall be marked with the manufacturers (MFRs) standard commercial PIN. (NOTE: The part number marked on the u
8、nit pack shall be the CID PIN.) 3.4 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and p
9、romotes economically advantageous life cycle costs. 3.5 Workmanship. Tube, metallic, seamless - cobalt alloy (1 inch OD) shall be processed in such a manner as to be uniform in quality and shall be free from other defects that will affect life, serviceability, or appearance. 4. REGULATORY REQUIREMEN
10、TS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with 23.403 of the Federal Acquisition Regulation (FAR). 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of th
11、is CID, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. 5.2 Certification. Certification must be done with the
12、 procuring activity approval. The contractor shall certify that the product offered meets the salient characteristics of the description and conforms to the producers own drawings, specifications, standards, and quality assurance practices, and is the same as the product offered for sale in the comm
13、ercial marketplace. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract 6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order. 7.
14、NOTES. 7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See section 2 for PIN format example. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59512A 3 7.2 Environmentally preferable material. Environ
15、mentally preferable materials should be used to the maximum extent possible to meet the requirements of this specification. As of the dating of this document, the U.S. Environmental Protection Agency (EPA) is focusing efforts on reducing 31 priority chemicals. The list of chemicals and additional in
16、formation is available on their website http:/www.epa.gov/osw/hazard/wastemin/priority.htm. Included in the EPA list of 31 priority chemicals are cadmium, lead, and mercury. Use of these materials should be minimized or eliminated unless needed to meet the requirements specified herein (see Section
17、3). 7.3 Commercial and Government Entity (CAGE) code. For ordering purposes, inventory control, and submission of these Tube, metallic, seamless - cobalt alloy (1 inch O.D.) to DLA Land and Maritime under the Parts Management Advisory Team (PMAT), CAGE code 58536 should be used 7.4 Source of documen
18、ts. FEDERAL REGULATIONS FAR Federal Acquisition Regulations (FAR) (Copies of these documents are available online at www.acquisition.gov/comp/far/index.html or from the U.S. Government Printing Office, 732 North Capital Street, NW, Washington D.C. 20401.) 7.5 Ordering data. The contract or order sho
19、uld specify the following: a. CID document number, revision, and CID PIN. b. Product conformance provisions. c. Packaging requirements. 7.6 Commercial products. As part of the market analysis and research effort, this CID was coordinated with the following manufacturers of commercial products. At th
20、e time of CID preparation and coordination, these manufacturers were known to have commercial products that would meet the requirements of this CID. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict acquisition to only the manufacturers shown
21、.) MFRs CAGE MFRs name and address 0XE09 BB&G ENTERPRISES, INC 3701 NW 126TH AVE Coral Springs, FL 33065-2439 (954)340-9225 7.7 Government users. To acquire information on obtaining these tube, metallic, seamless - cobalt alloy (1 inch O.D.) from the Government inventory system, contact DLA Land a
22、nd Maritime, ATTN DLA Land and Maritime Call Center (NAB), P.O. Box 3990, Columbus, OH 432183990 or telephone (614) 692-2271 or (614) 692-3191. 7.8 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extensiv
23、eness of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59512A 4 MILITARY INTERESTS CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA - FAS DLA - CC Navy-YD Preparing activity: DLA - CC Review activities: Navy-SA,SH Project 4710-2
24、014-001 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
