1、AMSC N/A FSC 5920 METRIC A-A-59688/3C 4 May 2009 SUPERSEDING A-A-59688/3B October 28, 2004 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET FUSE, CARTRIDGE, INSTRUMENT TYPE, 5 MM X 20 MM, TIME-DELAY, LOW-BREAKING CAPACITY The General Services Administration has authorized the use of this commercial i
2、tem description for all federal agencies. The complete requirements for procuring the fuses described herein shall consist of this document and the issue in effect of A-A-59688. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This commercial item description (CID) specification sheet uses a clas
3、sification system which is included in the PIN as shown in the following example (see NOTES). AA59688/03 - 001 A CID number Dash number (see table I) Configuration (see figure 1) SALIENT CHARACTERISTICS. Interface and physical dimensions. Fuses supplied to this CID specification sheet shall be as sp
4、ecified herein, and shall meet the requirements of ANSI/IEC 60127-2, part 2 (see figure 1). Case or body. The case or body shall be glass. Ferrules. The materials for the ferrules shall be nickel or silver plated brass. Mounting. Configuration A (ferrule type) is intended to be used with an applicab
5、le fuseholder or fuse clip. Configuration B (axial leads) is intended to be directly soldered onto a printed wiring board. Current rating. The ampere rating shall be as specified in table I. Voltage rating. The voltage rating shall be 250 V ac maximum. Voltage drop. Voltage drop shall be in accordan
6、ce with table I. Pre-arcing time/current characteristic. Pre-arcing time/current characteristic shall be as specified in table II. Breaking capacity. The breaking capacity shall be 35 amperes maximum or 10 In, whichever is greater. Endurance. Endurance shall be 100 cycles at 1.2 times the rated curr
7、ent followed by 1 hour at 1.5 times the rated current. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59688/3C 2 mm Inches Ltr Min Max Min Max A 5.0 5.3 .20 .21 B 8.0 12.0 .31 .47 C 19.5 20.5 .77 .81 D 36.0 41.00 1.42 1.61 E 8.0 12.0 .31 .47 F 1
8、9.7 21.7 .78 .85 G .62 .82 .02 .03 H 5.0 6.0 .20 .24 NOTES: 1. Dimensions are in millimeters. 2. Tolerance is 0.13 mm (.005 inch), unless otherwise specified. FIGURE 1. Interface and physical dimensions. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-
9、,-A-A-59688/3C 3 TABLE I. Characteristics. CID dash number AA59688/03- Configuration Current rating (amperes) Maximum voltage drop (mV) Power dissipation (W) max. 001A A 001B B 32 mA 5,000 002A A 002B B 40 mA 4,000 003A A 003B B 50 mA 3,500 004A A 004B B 63 mA 3,000 005A A 005B B 80 mA 3,000 006A A
10、006B B 100 mA 2,500 007A A 007B B 125 mA 2,000 008A A 008B B 160 mA 1,900 009A A 009B B 200 mA 1,500 010A A 010B B 250 mA 1,300 011A A 011B B 315 mA 1,100 012A A 012B B 400 mA 1,000 013A A 013B B 500 mA 900 014A A 014B B 630 mA 300 015A A 015B B 800 mA 250 016A A 016B B 1 A 150 1.6 Provided by IHSNo
11、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59688/3C 4 TABLE I. Characteristics - Continued. CID dash number AA59688/03- Configuration Current rating (amperes) Maximum voltage drop (mV) Power dissipation (W) max. 017A A 017B B 1.25 A 150 018A A 018B B 1.6 A 1
12、50 019A A 019B B 2 A 150 020A A 020B B 2.5 A 120 021A A 021B B 3.15 A 100 022A A 022B B 4 A 100 023A A 023B B 5 A 100 024A A 024B B 6.3 A 100 1.6 TABLE II. Pre-arcing time/current characteristic (+25C 10C). Percent of current rating 210 275 400 1,000 Rated current Max. Min. Max. Min. Max. Min. Max.
13、32 to 100 mA inclusive 2 min. 200 ms 10 s 40 ms 3 s 10 ms 300 ms Above 100 mA to 6.3 A 2 min. 600 ms 10 s 150 ms 3 s 20 ms 300 ms Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59688/3C 5 NOTES. PIN. The PIN should be used for Government purpose
14、s to buy commercial products to this CID specification sheet. See the classification section for PIN format example. Source of document. Other Publications AMERICAN NATIONAL STANDARDS INSTITUTE/INTERNATIONAL ELECTROTECHNICAL COMMISSION (ANSI/IEC) ANSI/IEC 60127-2 - Miniature Fuses, Part 2: Cartridge
15、 Fuse-Links. (Copies of this document are available online at http:/www.ansi.org/ or from the American National Standards Institute, 25 West 43rd Street, 4th Floor, New York, NY, 10036-7406.) (Industry association specifications and standards are generally available for reference from libraries. The
16、y are also distributed among technical groups and using Federal agencies.) Commercial products. As part of the market analysis and research effort, this CID specification sheet was coordinated with the following manufacturers of commercial products. At the time of CID specification sheet preparation
17、 and coordination, these manufacturers were known to have commercial products that would meet the requirements of this CID specification sheet. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) MF
18、Rs CAGE MFRs name and address 75915 Littelfuse Incorporated 800 E. Northwest Highway Des Plaines, IL 60016-3096 Phone number (847) 824-1188 Facsimile number (847) 391-0894 E-mail: URL: 92912 Bel Fuse Incorporated 206 Van Vorst Street Jersey City, NJ 07302-3096 Phone number (201) 432-0463 Facsimile
19、 number (201) 432-9542 E-mail: URL: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59688/3C 6 Part number (P/N) supersession data. These CID specification sheet PINs supersede the following MFRs P/Ns as shown. This information is being provide
20、d to assist in reducing proliferation in the Government inventory system. TABLE III. P/N supersession data. MFRs P/N 1/ MFRs P/N 1/ CID dash number AA59688/03- (see table I) MFR CAGE 75915 MFR CAGE 92912 CID dash number AA59688/03- (see table I) MFR CAGE 75915 MFR CAGE 92912 001A 218.032 N/A 013A 21
21、8.500 5ST500-R 001B 228.032 N/A 013B 228.500 5STP500-R 002A 218.040 N/A 014A 218.630 5ST630-R 002B 228.040 N/A 014B 228.630 5STP630-R 003A 218.050 N/A 015A 218.800 5ST800-R 003B 228.050 N/A 015B 228.800 5STP800-R 004A 218.063 5ST63-R 016A 218001 5ST1-R 004B 228.063 5STP63-R 016B 228001 5STP1-R 005A
22、218.080 5ST80-R 017A 2181.25 5ST1.25-R 005B 228.080 5STP80-R 017B 2281.25 5STP1.25-R 006A 218.100 5ST100-R 018A 21801.6 5ST1.6-R 006B 228.100 5STP100-R 018B 22801.6 5STP1.6-R 007A 218.125 5ST125-R 019A 218002 5ST2-R 007B 228.125 5STP125-R 019B 228002 5STP2-R 008A 218.160 5ST160-R 020A 21802.5 5ST2.5
23、-R 008B 228.160 5STP160-R 020B 22802.5 5STP2.5-R 009A 218.200 5ST200-R 021A 2183.15 5ST3.15-R 009B 228.200 5STP200-R 021B 228.315 5STP3.15-R 010A 218.250 5ST250-R 022A 218004 5ST4-R 010B 228.250 5STP250-R 022B 228004 5STP4-R 011A 218.315 5ST315-R 023A 218005 5ST5-R 011B 228.315 5STP315-R 023B 228005
24、 5STP5-R 012A 218.400 5ST400-R 024A 21806.3 5ST6.3-R 012B 228.400 5STP400-R 024B 22806.3 5STP6.3-R 1/ The manufacturers P/N shall not be used for procurement to the requirements of this CID specification sheet. At the time of preparation of this CID specification sheet, the aforementioned commercial
25、 products were reviewed and could be replaced by the CID PIN shown. For actual part marking requirements, see the marking paragraph of A-A-59688. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59688/3C 7 CID number supersession data. This CID su
26、persedes Defense Supply Center, Columbus (DSCC) drawing 90032 and its dash numbers as shown. TABLE IV. CID number supersession data. CID dash number (see table I) AA59688/03- Superseded DSCC drawing number 90032- CID dash number (see table I) AA59688/03- Superseded DSCC drawing number 90032- 001A 00
27、1A 013A 013A 001B 001B 013B 013B 002A 002A 014A 014A 002B 002B 014B 014B 003A 003A 015A 015A 003B 003B 015B 015B 004A 004A 016A 016A 004B 004B 016B 016B 005A 005A 017A 017A 005B 005B 017B 017B 006A 006A 018A 018A 006B 006B 018B 018B 007A 007A 019A 019A 007B 007B 019B 019B 008A 008A 020A 020A 008B 00
28、8B 020B 020B 009A 009A 021A 021A 009B 009B 021B 021B 010A 010A 022A 022A 010B 010B 022B 022B 011A 011A 023A 023A 011B 011B 023B 023B 012A 012A 024A 024A 012B 012B 024B 024B Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59688/3C 8 National stock
29、 number (NSN). The following is a list of NSNs assigned which correspond to this CID specification sheet. The list is for information only and may not be indicative of all possible NSNs associated with the CID specification sheet. For up to date information on assigned NSNs, please contact the afore
30、mentioned DSCC office listed in A-A-BBBBB. TABLE V. NSNs. Dash number (see table I) AA59688/03- NSN Dash number (see table I) AA59688/03- NSN 001A N/A 013A N/A 001B N/A 013B N/A 002A N/A 014A N/A 002B N/A 014B N/A 003A N/A 015A 5920-01-526-9246 003B N/A 015B N/A 004A N/A 016A N/A 004B N/A 016B N/A 0
31、05A N/A 017A N/A 005B N/A 017B N/A 006A N/A 018A N/A 006B N/A 018B N/A 007A N/A 019A N/A 007B N/A 019B N/A 008A N/A 020A N/A 008B N/A 020B N/A 009A N/A 021A 5920-01-528-0638 009B N/A 021B N/A 010A N/A 022A N/A 010B N/A 022B N/A 011A N/A 023A N/A 011B N/A 023B N/A 012A N/A 024A N/A 012B N/A 024B N/A
32、Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extensiveness of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59688/3C 9 MILITARY INTE
33、RESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS Custodians: Navy - EC Preparing activity: DLA - CC DLA-CC Project 5920-2009-046 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
