DLA A-A-59895-2012 ANCHOR SNOW REPLACEMENT KIT.pdf

上传人:dealItalian200 文档编号:687774 上传时间:2018-12-30 格式:PDF 页数:4 大小:32.67KB
下载 相关 举报
DLA A-A-59895-2012 ANCHOR SNOW REPLACEMENT KIT.pdf_第1页
第1页 / 共4页
DLA A-A-59895-2012 ANCHOR SNOW REPLACEMENT KIT.pdf_第2页
第2页 / 共4页
DLA A-A-59895-2012 ANCHOR SNOW REPLACEMENT KIT.pdf_第3页
第3页 / 共4页
DLA A-A-59895-2012 ANCHOR SNOW REPLACEMENT KIT.pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 AMSC N/A FSC 8465 A-A-59895 August 7, 2012 COMMERCIAL ITEM DESCRIPTION ANCHOR, SNOW REPLACEMENT KIT The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers the requirements for a

2、 kit that replaces the snow anchors that are issued in the Snow and Ice Mobility Kit (SIMK) (A-A-59872). 2. CLASSIFICATION. The Anchor, Snow Replacement Kit will be furnished as one kit. 3. SALIENT CHARACTERISTICS. The kit shall be composed of the following items in the following quantities as liste

3、d in Table I: TABLE I. List of items in kits 3.1 Dimensions. Individual item dimensions will be in accordance with drawings and specification requirements specified in the applicable CID document (see Table I) unless item is a manufacturers part number/cage code then, in which manufacturers current

4、specifications apply. 3.2 Color. Individual item colors will be in accordance with applicable specifications. (see Table I). 3.3 End item testing. Individual item test standards will be in accordance with their related International Climbing and Mountaineering Federation Standards, where applicable.

5、 Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Support, Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of this address information using Acquisition Stream

6、lining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil. Item Name CID Type Quantity Carabiner A-A-59836 H(1) 1 Anchor, Snow A-A-59857 - 4 METRIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59895 2 3.4

7、Materials. Individual item materials will be in accordance with applicable specifications (see Table I). 3.5 Workmanship. The Anchor, Snow Replacement Kit shall conform to the quality of product established by this document. The occurrence of defects shall not exceed the contractors own quality assu

8、rance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The Anchor, Snow Replacement Kit shall have no unexpected material or component failures during a continuous one-year cycle. The Anchor, Snow Replacement Kit shall

9、 have no unexpected material or component failures during periodic use over a five year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requirements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each Anchor,

10、Snow, Replacement Kit shall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following information shall be included in the printing for the identification label: ANCHOR, SNOW, REPLACMENT KIT NSN: XXXX-XX-XXX-XXXX (Example) The foll

11、owing instruction information shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on the product c. The use of the product d. How to choose other components for use in the system e. How to maintain and service the product f. The lifespa

12、n of the product or how to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging i. Identification of the model, if more than one model is available 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials

13、to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided t

14、hat the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, confor

15、m to the producers own drawings, specifications, Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59895 3 standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves t

16、he right to require proof of such conformance. 5.2 End item examination. Each kit shall be examined for the following defects as listed in Table II: TABLE II. End item examination Examine Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Ac

17、ceptance criteria shall be as specified in the contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing and marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1

18、Copies of Government documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index

19、.html or by contacting the Superintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: a. Title, number, and date of this Commercial Item Description. b. When required, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (

20、see 5.3). d. Packaging (see 6.1). 7.3 National Stock Numbers (NSNs). The following is a list of NSNs and Types associated for Type I, to determine the required items for the replacement kit that corresponds to A-A-59857, Anchor, Snow, and A-A-59836, Carabiner, listed below: NSN TYPE ITEM 8465-01-578

21、-8717 Anchor, Snow 8465-01-578-8898 H (1) Carabiner Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59895 4 7.4 Key words. Climbing MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy -MC PREPARING ACTIVITY: D

22、LA-CT Project Number: 8465-2012-006 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1