1、 AMSC N/A FSC 8465 A-A-59896 August 7, 2012 COMMERCIAL ITEM DESCRIPTION ANCHOR, ICE REPLACEMENT KITS The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers the requirements for a
2、 kit that replaces the ice anchors that are issued in the Snow and Ice Mobility Kits (SIMK) (A-A-59872). 2. CLASSIFICATION. The Ice Anchor Replacement Kits will be furnished as two kits. 2.1 Types. Type I Anchor, Ice Size I Replacement Kit Type II Anchor, Ice Size II Replacement Kit 3. SALIENT CHARA
3、CTERISTICS. The kit shall be composed of the following items in the following quantities as listed in Table I: TABLE I. List of items in kits 3.1 Dimensions. Individual item dimensions will be in accordance with drawings and specification requirements specified in the applicable CID document (see Ta
4、ble I) unless item is a manufacturers part number/cage code then, in which manufacturers current specifications apply. Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Support, Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since co
5、ntact information can change, you may want to verify the currency of this address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil. Item Name CID Type Size Replacement Kit Quantities Type I Type II Anchor, Ice A-A-598
6、45 - I 10 - Anchor, Ice A-A-59845 - II - 10 Carabiner A-A-59836 X - 1 1 METRIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59896 2 3.2 Color. Individual item colors will be in accordance with applicable specifications (see Table I). 3.3 End i
7、tem testing. Individual item test standards will be in accordance with their related International Climbing and Mountaineering Federation Standards, where applicable. 3.4 Materials. Individual item materials will be in accordance with applicable specifications (see Table I). 3.5 Workmanship. The Anc
8、hor, Ice Replacement Kits shall conform to the quality of product established by this document. The occurrence of defects shall not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Servic
9、e life. The Anchor, Ice Replacement Kits shall have no unexpected material or component failures during a continuous one-year cycle. The Anchor, Ice Replacement Kits shall have no unexpected material or component failures during periodic use over a five year period. 3.7 Labels/barcoding/instruction
10、slip. If applicable, all labeling, barcoding and instruction slip requirements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each Anchor, Ice, Replacement Kit shall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall
11、 be white. The following information shall be included in the printing for the identification label: ANCHOR, ICE REPLACEMENT KIT NSN: XXXX-XX-XXX-XXXX (Example) The following instruction information shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning
12、of any marking on the product c. The use of the product d. How to choose other components for use in the system e. How to maintain and service the product f. The lifespan of the product or how to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing a
13、nd aging i. Identification of the model, if more than one model is available 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, r
14、ecovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle co
15、sts. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59896 3 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers ow
16、n drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance. 5.2 End item examination. Each kit shall be examined for the following defects as li
17、sted in Table II: TABLE II. End item examination Examine Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and ma
18、rking. The preservation, packing and marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government documents are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Ord
19、er Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the foll
20、owing: a. Title, number, and date of this Commercial Item Description. b. When required, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3) d. Packaging (see 6.1) 7.3 National Stock Numbers (NSNs). The following is a list of NSNs Sizes and Types associated for Type I
21、, to determine the required items for the replacement kit that corresponds to A-A-59845, Anchor, Ice listed below: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59896 4 NSNs SIZES TYPES ITEM 8465-01-578-6433 I Anchor, Ice 8465-01-578-6447 II An
22、chor, Ice 8465-01-578-8906 - X Carabiner 7.4 Key words. Climbing MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy -MC PREPARING ACTIVITY: DLA-CT Project Number: 8465-2012-002 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
