1、 AMSC N/A FSC 8465 A-A-59897 August 7, 2012 COMMERCIAL ITEM DESCRIPTION ARMY MOUNTAINEERING KIT (AMK), ROPE REPLACEMENT KIT The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers
2、 the requirements for a kit that replaces a complete set of unserviceable Kernmantle ropes that are issued in the Army Mountaineering Kits (AMKs) specifically the High Angle Mountaineering Kit (HAMK) (A-A-59869) and the Assault Climber Team Kit (ACTK) (A-A-59873). 2. CLASSIFICATION. The Army Mountai
3、neering Kit (AMK) Rope Replacement Kits will be furnished as five kits. 2.1 Types: Type I HAMK Rope Replacement Kit Type II HAMK Rope, Kernmantle, Type I Replacement Kit Type III HAMK Rope, Kernmantle, Type IV Replacement Kit Type IV ACTK Rope Replacement Kit Type V ACTK Rope, Kernmantle, Type III R
4、eplacement Kit 3. SALIENT CHARACTERISTICS. The kits shall be composed of the following items in the following quantities as listed in Table I: Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Support, Standardization Team, 700 Robbins Avenue, Philadelphia,
5、 PA 19111-5096. Since contact information can change, you may want to verify the currency of this address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil. METRIC Provided by IHSNot for ResaleNo reproduction or networ
6、king permitted without license from IHS-,-,-A-A-59897 2 TABLE I. List of items in kits 3.1 Dimensions. Individual item dimensions will be in accordance with drawings and specification requirements specified in the applicable CID document (see Table I) unless item is a manufacturers part number/cage
7、code then, in which manufacturers current specifications apply. 3.2 Color. Individual item colors will be in accordance with applicable specifications (see Table I). 3.3 End item testing. Individual item test standards will be in accordance with their related International Climbing and Mountaineerin
8、g Federation Standards, where applicable. 3.4 Materials. Individual item materials will be in accordance with applicable specifications (see Table I). 3.5 Workmanship. The AMK Rope Replacement Kits shall conform to the quality of product established by this document. The occurrence of defects shall
9、not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The AMK Rope Replacement Kits shall have no unexpected material or component failures during a continuous one-year cycle
10、. The AMK Rope Replacement Kit shall have no unexpected material or component failures during periodic use over a five year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requirements shall be as specified in the solicitation or contract (s
11、ee 7.2). 3.7.1 Labels. Each Army Mountaineering Kit (AMK) Rope Replacement Kit shall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following information shall be included in the printing for the identification label: ARMY MOUNTAI
12、NEERING KIT (AMK) ROPE REPLACEMENT KIT NSN: XXXX-XX-XXX-XXXX (Example) The following instruction information shall be supplied: Item Name CID Item Item REPLACEMENT KIT TYPES QUANTITIES Type Class TYPE I TYPE II TYPE III TYPE IV TYPE V Rope, Kernmantle A-A-59835 I 3 1 4 1 Rope, Kernmantle A-A-59835 I
13、II 1 - - - 2 2 Rope, Kernmantle A-A-59835 IV 1 1 - 4 - - Carabiner A-A-59836 X - - 1 1 - 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59897 3 a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on
14、 the product c. The use of the product d. How to choose other components for use in the system e. How to maintain and service the product f. The lifespan of the product or how to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging i. Ident
15、ification of the model, if more than one model is available 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or envi
16、ronmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT C
17、ONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commerc
18、ial marketplace. The Government reserves the right to require proof of such conformance. 5.2 End item examination. Each kit shall be examined for the following defects as listed in Table II: TABLE II. End item examination Examine Defect Description Components Missing components Incorrect item, size,
19、 type or color 5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing and marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7
20、.1 Sources of Government documents. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59897 4 7.1.1 Copies of Government documents are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk, Building
21、 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: a. Title,
22、number, and date of this Commercial Item Description. b. When required, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3). d. Packaging (see 6.1). 7.3 National Stock Numbers (NSNs). The following is a list of NSNs Sizes and Types associated for Type I through Type V
23、, to determine the required items for the replacement kit that corresponds to A-A-59835, Rope, Kernmantle, and A-A-59836, Carabiner, listed below: NSNs SIZES TYPE ITEM 4020-01-577-8686 3 I Rope Kernmantle 4020-01-577-8748 1 III Rope Kernmantle 4020-01-577-8714 1 IV Rope Kernmantle 8465-01-578-8906 -
24、 X Carabiner-Non Locking 7.4 Key words. Climbing MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy - MC PREPARING ACTIVITY: DLA-CT Project Number: 8465-2012-007 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
