DLA A-A-59903-2012 CRAMPON REPLACEMENT KIT.pdf

上传人:arrownail386 文档编号:687782 上传时间:2018-12-30 格式:PDF 页数:4 大小:32.39KB
下载 相关 举报
DLA A-A-59903-2012 CRAMPON REPLACEMENT KIT.pdf_第1页
第1页 / 共4页
DLA A-A-59903-2012 CRAMPON REPLACEMENT KIT.pdf_第2页
第2页 / 共4页
DLA A-A-59903-2012 CRAMPON REPLACEMENT KIT.pdf_第3页
第3页 / 共4页
DLA A-A-59903-2012 CRAMPON REPLACEMENT KIT.pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 AMSC N/A FSC 8465 A-A-59903 23 August, 2012 COMMERCIAL ITEM DESCRIPTION CRAMPON REPLACEMENT KIT The General Services Administration has authorized the use of this Commercial Item Description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers the requirements for a kit

2、 that replaces the crampons that are issued in the Snow and Ice Mobility Kit (SIMK) (A-A-59872). 2. CLASSIFICATION. The Crampon Replacement Kit will be furnished as one kit. 3. SALIENT CHARACTERISTICS. The kit shall be composed of the following items in the following quantities as listed in Table I:

3、 TABLE I. List of items in kits 3.1 Dimensions. Individual item dimensions shall be in accordance with drawings and specification requirements specified in the applicable CID document (see Table I) unless item is a manufacturers part number/cage code then, in which manufacturers current specificatio

4、ns apply. 3.2 Color. Individual item colors shall be in accordance with applicable specifications (see Table I). 3.3 End item testing. Individual item test standards shall be in accordance with their related International Climbing and Mountaineering Federation Standards, where applicable. 3.4 Materi

5、als. Individual item materials shall be in accordance with applicable specifications (see Table I). Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Support, Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information c

6、an change, you may want to verify the currency of this address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil. Item Name CID Type Quantity Crampon A-A-59837 I 2 Crampon, Center Strap Extender A-A-59837 - 2 METRIC Pr

7、ovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59903 2 3.5 Workmanship. The Crampon Replacement Kits shall conform to the quality of product established by this document. The occurrence of defects shall not exceed the contractors own quality assur

8、ance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The Crampon Replacement Kits shall have no unexpected material or component failures during a continuous one-year cycle. The Crampon Replacement Kits shall have no

9、unexpected material or component failures during periodic use over a five year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requirements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Crampon, Replacement K

10、it shall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following information shall be included in the printing for the identification label: CRAMPON REPLACEMENT KIT NSN: XXXX-XX-XXX-XXXX (Example) The following instruction inform

11、ation shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on the product c. The use of the product d. How to choose other components for use in the system e. How to maintain and service the product f. The lifespan of the product or how

12、to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging i. Identification of the model, if more than one model is available 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent pr

13、acticable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets o

14、r exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own d

15、rawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance. Provided by IHSNot for ResaleNo reproduction or networking permitted without license fr

16、om IHS-,-,-A-A-59903 3 5.2 End item examination. Each kit shall be examined for the following defects as listed in Table II: TABLE II. End item examination Examine Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall

17、be as specified in the contract or purchase order (see 7.3). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing and marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government doc

18、uments are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Su

19、perintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: a. Title, number, and date of this Commercial Item Description. b. When required, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3). d. Packaging (see 6

20、.1). 7.3 National Stock Numbers (NSNs). The following is a list of NSNs associated for Type I, to determine the required items for the replacement kit that corresponds to A-A-59837, Crampon, Mountaineering listed below: NSNs ITEM 8465-01-578-8908 Crampon 8465-01-583-4023 Crampon, Center Bar Extender

21、 7.4 Key words. Climbing Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59903 4 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy -MC PREPARING ACTIVITY: DLA-CT Project Number: 8465-2012-013 NOTE: The activ

22、ities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1