1、 AMSC N/A FSC 8465 A-A-59905 23 August, 2012 COMMERCIAL ITEM DESCRIPTION ARMY MOUNTAINEERING KIT HARNESS REPLACEMENT KITS The General Services Administration has authorized the use of this Commercial Item Description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers t
2、he requirements for a kit that replaces the harnesses that are issued in the Army Mountaineering Kits (AMKs); the High Angle Mountaineering Kit (HAMK) (A-A-59869) and the Assault Climber Team Kit (ACTK) (A-A-59873). 2. CLASSIFICATION. The AMK Harness Replacement Kits will be furnished as two kits. 2
3、.1 Types: Type I HAMK Harness Replacement Kit Type II ACTK Harness Replacement Kit 3. SALIENT CHARACTERISTICS. The kit shall be composed of the following items in the following quantities as listed in Table I: TABLE I. List of items in kits 3.1 Dimensions. Individual item dimensions shall be in acco
4、rdance with drawings and specification requirements specified in the applicable CID document (see Table I) unless item is a manufacturers part number/cage code then, in which manufacturers current specifications apply. Comments, suggestions, or questions on this document should be addressed to: Attn
5、: DLA Troop Support Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of this address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database at https:/as
6、sist.dla.mil/. Item Name CID Type Replacement Kit Quantities Type I Type II Harness A-A59847 1 10 3 Carabiner A-A59836 H(1) 1 1 METRIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59905 2 3.2 Color. Individual item colors shall be in accordanc
7、e with applicable specifications (see Table I). 3.3 End item testing. Individual item test standards shall be in accordance with their related International Climbing and Mountaineering Federation Standards, where applicable. 3.4 Materials. Individual item materials shall be in accordance with applic
8、able specifications (see Table I). 3.5 Workmanship. The Harness Replacement Kits shall conform to the quality of product established by this document. The occurrence of defects shall not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technic
9、al data in the solicitation and/or contract. 3.6 Service life. The Harness Replacement Kits shall have no unexpected material or component failures during a continuous one-year cycle. The Harness Replacement Kits shall have no unexpected material or component failures during periodic use over a five
10、 year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requirements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each Army Mountaineering Kit, Harness Replacement Kit shall have identification label Class 5 c
11、onforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following information shall be included in the printing for the identification label: ARMY MOUNTAINEERING KIT HARNESS REPLACEMENT KIT NSN: XXXX-XX-XXX-XXXX (Example) The following instruction information shall be suppl
12、ied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on the product c. The use of the product d. How to choose other components for use in the system e. How to maintain and service the product f. The lifespan of the product or how to access it g. The
13、effects of chemical reagents and temperature on the product h. The effects of storing and aging i. Identification of the model, if more than one model is available 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accord
14、ance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operat
15、ional and maintenance requirements and promotes economically advantageous life cycle costs. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59905 3 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the s
16、alient characteristics of this Commercial Item Description, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformanc
17、e. 5.2 End item examination. Each kit shall be examined for the following defects as listed in Table II: TABLE II. End item examination Examine Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall be as specified in t
18、he contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing and marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government documents are available
19、 online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Docu
20、ments at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: a. Title, number, and date of this Commercial Item Description. b. When required, labeling, barcoding and instruction slip (see 3.7). c. Acceptance criteria (see 5.3). d. Packaging (see 6.1). 7.3 National S
21、tock Numbers (NSNs). The following is a list of NSNs and Types associated for Type I, to determine the required items for the replacement kit that corresponds to A-A-59847, Harness, Mountaineering, and A-A-59836, Carabiner listed below: Provided by IHSNot for ResaleNo reproduction or networking perm
22、itted without license from IHS-,-,-A-A-59905 4 NSNs TYPE 8465-01-578-8910 1 8465-01-578-8898 H(1) 7.4 Key words. Climbing MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy -MC PREPARING ACTIVITY: DLA-CT Project Number: 8465-2012-015 NOTE: The activities listed
23、above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
