1、 AMSC N/A FSC 8465 A-A-59909 24 August 2012 COMMERCIAL ITEM DESCRIPTION TRANSCEIVER, AVALANCHE REPLACEMENT KIT The General Services Administration has authorized the use of this Commercial Item Description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers the requirem
2、ents for a kit that replaces the avalanche transceivers that are issued in the Snow and Ice Mobility Kit (SIMK), (A-A-59872). 2. CLASSIFICATION. The Transceiver, Avalanche Replacement Kit will be furnished as one kit. 3. SALIENT CHARACTERISTICS. The kit shall be composed of the following items in th
3、e following quantities as listed in Table I: TABLE I. List of items in kits 3.1 Dimensions. Individual item dimensions will be in accordance with drawings and specification requirements specified in the applicable CID document (see Table I) unless item is a manufacturers part number/cage code then,
4、in which manufacturers current specifications apply. 3.2 Color. Individual item colors will be in accordance with applicable specifications (see Table I). 3.3 End item testing. Individual item test standards will be in accordance with their related International Climbing and Mountaineering Federatio
5、n Standards, where applicable. Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Support Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of this address informa
6、tion using Acquisition Streamlining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil/. Item Name CID Type Quantity Transceiver, Avalanche A-A-59855 - 2 Carabiner-Non-Locking A-A-59836 X 1 METRIC Provided by IHSNot for ResaleNo reproduction or networking permit
7、ted without license from IHS-,-,-A-A-59909 2 3.4 Materials. Individual item materials will be in accordance with applicable specifications (see Table I). 3.5 Workmanship. The Transceiver, Avalanche Replacement shall conform to the quality of product established by this document. The occurrence of de
8、fects shall not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The Transceiver, Avalanche Replacement shall have no unexpected material or component failures during a cont
9、inuous one-year cycle. The Transceiver, Avalanche Replacement shall have no unexpected material or component failures during periodic use over a five year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requirements shall be as specified in
10、the solicitation or contract (see 7.2). 3.7.1 Labels. Each Transceiver, Avalanche, Replacement Kit shall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following information shall be included in the printing for the identification
11、 label: TRANSCEIVER, AVALANCHE REPLACEMENT KIT NSN: XXXX-XX-XXX-XXXX (Example) The following instruction information shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on the product c. The use of the product d. How to choose other com
12、ponents for use in the system e. How to maintain and service the product f. The lifespan of the product or how to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging i. Identification of the model, if more than one model is available 4. RE
13、GULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environ
14、mentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products prov
15、ided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own drawings, specifications, Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59909 3 standards, and quality assurance practices, and be the
16、 same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance. 5.2 End item examination. Each kit shall be examined for the following defects as listed in Table II: TABLE II. End item examination Examine Defect Description Compon
17、ents Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing and marking shall be as specified in the contract
18、 or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government documents are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. 7.1.2 Feder
19、al Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: a. Title, number, and date of this Commercial Item Description. b. When req
20、uired, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3). d. Packaging (see 6.1). 7.3 National Stock Numbers (NSNs). The following is a list of NSNs and Types associated for Type I, to determine the required items for the replacement kit that corresponds to A-A-5985
21、5, Transceiver, Avalanche and A-A-59836, Carabiner, listed below: NSNs TYPE ITEM 8465-01-572-3962 Transceiver, Avalanche 8465-01-578-8906 X Carabiner-Non Locking Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59909 4 7.4 Key words. Climbing MILI
22、TARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy-MC PREPARING ACTIVITY: DLA-CT Project Number: 8465-2012-020 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
