1、 AMSC N/A FSC 8465 A-A-59910 24 August 2012 COMMERCIAL ITEM DESCRIPTION ARMY MOUNTAINEERING KIT WEBBING REPLACEMENT KIT The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers the
2、 requirements for a kit that replaces the webbing that is issued in the Army Mountaineering Kits (AMKs), the High Angle Mountaineering Kit (HAMK), (A-A-59869), and the Assault Climber Team Kit (ACTK) (A-A-59873). 2. CLASSIFICATION. The AMK Webbing Replacement Kit will be furnished as one kit. 3. SAL
3、IENT CHARACTERISTICS. The kit shall be composed of the following items in the following quantities as listed in Table I: TABLE I. List of items in kits 3.1 Dimensions. Individual item dimensions will be in accordance with drawings and specification requirements specified in the applicable CID docume
4、nt (see Table I) unless item is a manufacturers part number/cage code then, in which manufacturers current specifications apply. Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Support Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096.
5、 Since contact information can change, you may want to verify the currency of this address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil/. Item Name CID Type Class Quantity Webbing A-A-59840 I 1 10 Carabiner A-A-59
6、836 X - 1 METRIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59910 2 3.2 Color. Individual item colors will be in accordance with applicable specifications (see Table I). 3.3 End item testing. Individual item test standards will be in accorda
7、nce with their related International Climbing and Mountaineering Federation Standards, where applicable. 3.4 Materials. Individual item materials will be in accordance with applicable specifications (see Table I). 3.5 Workmanship. The Webbing Replacement Kits shall conform to the quality of product
8、established by this document. The occurrence of defects shall not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The Webbing Replacement Kits shall have no unexpected mate
9、rial or component failures during a continuous one-year cycle. The Webbing Replacement Kits shall have no unexpected material or component failures during periodic use over a five year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requirem
10、ents shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each Army Mountaineering Kit, Webbing Replacement Kit shall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following information shall be included
11、 in the printing for the identification label: ARMY MOUNTAINEERING KIT WEBBING REPLACEMENT KIT NSN: XXXX-XX-XXX-XXXX (Example) The following instruction information shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on the product c. T
12、he use of the product d. How to choose other components for use in the system e. How to maintain and service the product f. The lifespan of the product or how to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging i. Identification of the
13、model, if more than one model is available 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally prefe
14、rable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59910 3 that the material meets or exceeds the operational and m
15、aintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own drawings, specifications, standa
16、rds, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance. 5.2 End item examination. Each kit shall be examined for the following defects as listed in Table II: TABLE II. End it
17、em examination Examine Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing a
18、nd marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government documents are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk, Building 4D, 700 Robbins
19、Avenue, Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: a. Title, number, and date
20、of this Commercial Item Description. b. When required, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3). d. Packaging (see 6.1). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59910 4 7.3 National Stock Numbers
21、 (NSNs). The following is a list of NSNs Types and Sizes associated for Type I, to determine the required items for the replacement kit that corresponds to A-A-59840, Webbing, Mountaineering, and A-A-59836, Carabiner, listed below: NSNs SIZES TYPE ITEM 8305-01-578-8909 1 I Webbing Mountaineering 846
22、5-01-578-8906 Carabiner-Non Locking 7.4 Key words. Climbing MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy -MC PREPARING ACTIVITY: DLA-CT Project Number: 8465-2012-021 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
