1、 AMSC N/A FSC 5330 DETAIL SPECIFICATION SHEET SEAL ASSEMBLY 3/8 INCH CONDUIT BOSS This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet. .130 .00
2、5309.100.438.010.094.344KNIFE CUT2 REQUIRED.188.130 .005309.100.438.010.094.344KNIFE CUT3 REQUIRED.188120 5120 5FIGURE 1. 2 Hole seal. FIGURE 2. 3 Hole seal. 309.100.438.010.094.344KNIFE CUT2 REQUIREDKNIFE CUT4 REQUIRED.0804 HOLES.250309.438.010.094.344KNIFE CUT5 REQUIRED.0805 HOLES.250FIGURE 3. 4 H
3、ole seal. FIGURE 4. 5 Hole seal.AN3067 REV. 4 5 August 2008 SUPERSEDING AN3067 REV. 3 9 July 1954 INCH-POUNDInactive for new design after 22 August 1997 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AN3067 REV. 4 2.130 .005309.438.010.094.344KNIFE
4、CUT6 REQUIRED.250.0806 HOLES72 TYP.656.008.375.046FIGURE 5. 6 Hole seal. FIGURE 6. Washer. TABLE I. Part numbers. SEALS AN ASSEMBLY PART NO. PART NO. HOLES WASHER AN3067-2 AN3067S2 2 AN3067-3 AN3067S3 3 AN3067-4 AN3067S4 4 AN3067W3 AN3067-5 AN3067S5 5 AN3067-6 AN3067S6 6 NOTES: 1. MATERIAL: Seal, sy
5、nthetic rubber, soft. Washer, insulation, plastic, laminated thermosetting, cotton-fabric-base, phenolic-resin (FBG), specification MIL-I-24768/14. 2. Dimension in inches. Unless otherwise specified, tolerances: Dimensions .016, Angles 1. 3. This assembly is for use with conduit boss, SAE AS10051. U
6、se nut AN3054-6. 4. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of changes. Custodians: Preparing activity: Air Force - 99 DLA IS (Project 5330-2008-012) Review activity: Air Force - 71 NOTE: T
7、he activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
