1、REVISIONS LTR DESCRIPTION DATE APPROVED A Update references, technical date, contact information, distribution statement. 24 April 2008 Abdonasser Abdouni B Updated Vendor PINs. 30 July 2009 Abdonasser Abdouni Prepared in accordance with ASME Y14.100 Source control drawing REV PAGE REV STATUS OF PAG
2、ES REV B A A B PAGE 1 2 3 4 PMIC N/A PREPARED BY DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43218-3990 Ron Gary Original date of drawing 20 April 2001 CHECKED BY TITLE Lee Surowiec CONNECTOR, RECEPTACLE, ELECTRICAL, RF, SERIES BNC, FLANGE MOUNT, FOR LOW SMOKE CABLES APPROVED BY Rob Heber SIZE CA
3、GE CODE DWG. NO. 01010 A 037Z3 REV B PAGE 1 OF 4 AMSC N/A 5935-E832-007 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01010 REV A PAGE 2 NOTES: 1. Dimensions are
4、 in inches; metric equivalents are in parentheses. 2. Metric equivalents are given for reference purposes only. 3. All undimensioned pictorial configurations are for reference purposes only. 4. Series BNC, socket contact interface, in accordance with MIL-STD-348. FIGURE 1. General configuration. Pro
5、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01010 REV A PAGE 3 ENGINEERING DATA; This document covers the requirements for radio frequency connectors accommodatin
6、g special low smoke coaxial cables. REQUIREMENTS: These connectors shall conform to all the requirements of the latest issue of DSCC drawing 84148, figure 1 herein, and MIL-PRF 39012/18, and accommodate the cables listed in table I, with the following additions and exceptions. Electrical: Shall be i
7、n accordance with MIL-PRF-39012/18. Mechanical: Shall be in accordance with MIL-PRF-39012/18. Environmental: Shall be in accordance with MIL-PRF-39012/18. TABLE I. Cable accommodation. Part or Identifying Number (PIN) 1/ 2/ Applicable cable 01010BBSA M17/220-00001 01010BBSB # M17/221-00001 01010BBSC
8、 & M17/222-00001 01010BBSD $ M17/223-00001 01010BBSE % M17/224-00001 01010BBSF M17/225-00001 1/ These connectors have captivated center contacts. 2/ These connectors are assembled using the MIL-C-22520/5 crimp tool and using the following crimp dies: M22520/5-05 # M22520/5-07 & M22520/5-29 $ M22520/
9、5-25 % M22520/5-27 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01010 REV B PAGE 4 Approved sources of supply. Approved sources of supply are listed herein. Add
10、itional sources will be added as they become available. The vendors listed below have agreed to this drawing and a certificate of compliance has been submitted to Defense Supply Center Columbus, ATTN: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990 or emailed to RFConnectordla.mil . DSCC drawing PI
11、N Vendor similar PIN 1/ Vendor CAGE number 01010BBSA (3190-1145) Superseded by 1055320A071-000 00795 01010BBSB (3190-1166) Superseded by 1055311A071-000 01010BBSC (3190-1188) Superseded by 1055348A071-000 01010BBSD (3190-1193) Superseded by 1055300A071-000 01010BBSE (3190-1210) Superseded by 1055318
12、A071-000 01010BBSF (3190-1215) Superseded by 1055319A071-000 1/ Parts must be purchased to this DSCC PIN to assure all performance requirements and test are met. Vendor CAGE Vendor name number and address 00795 Delta Electronics 416 Cabot Street Beverly, MA 01915 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
