1、REVISIONS LTR DESCRIPTION DATE APPROVED A Update references, technical date, contact information, distribution statement. 24 April 2008 Abdonasser Abdouni B Updated the Vendor PINs. 30 July 2009 Abdonasser Abdouni Prepared in accordance with ASME Y14.100 Source control drawing REV PAGE REV STATUS OF
2、 PAGES REV B A A B PAGE 1 2 3 4 PMIC N/A PREPARED BY DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43218-3990 Ron Gary Original date of drawing 20 April 2001 CHECKED BY TITLE Lee Surowiec CONNECTOR, PLUG, ELECTRICAL, RF, SERIES TNC, FOR LOW SMOKE CABLES APPROVED BY Rob Heber SIZE CAGE CODE DWG. NO.
3、 01014 A 037Z3 REV B PAGE 1 OF 4 AMSC N/A 5935-E832-011 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01014 REV A PAGE 2 NOTES: 1. Dimensions are in inches. Metr
4、ic equivalents are in parenthesis. 2. Metric equivalents are given for reference purposes only. 3. All undimensioned pictorial configurations are for reference purposes only. 4. Series TNC, socket contact interface, in accordance with MIL-STD-348. FIGURE 1. General configuration. Provided by IHSNot
5、for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01014 REV A PAGE 3 ENGINEERING DATA: This document covers the requirements for radio frequency connectors accommodating special low sm
6、oke coaxial cables. REQUIREMENTS: These connectors shall conform to all the requirements of the latest issue of DSCC drawing 84148, figure 1 herein, and MIL-PRF 39012/27, and accommodate the cables listed in table I, with the following additions and exceptions. Electrical: Shall be in accordance wit
7、h MIL-PRF-39012/27. Mechanical: Shall be in accordance with MIL-PRF-39012/27. Environmental: Shall be in accordance with MIL-PRF-39012/27. TABLE I. Cable accommodation. Part or Identifying Number (PIN) 1/ 2/ Applicable cable 01014TBSA M17/220-00001 01014TBSB # M17/221-00001 01014TBSC & M17/222-00001
8、 01014TBSD $ M17/223-00001 01014TBSE % M17/224-00001 01014TBSF M17/225-00001 1/ These connectors have captivated center contacts. 2/ These connectors are assembled using the MIL-C-22520/5 crimp tool and using the following crimp dies: M22520/5-05 # M22520/5-07 & M22520/5-29 $ M22520/5-25 % M22520/5-
9、27 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01014 REV B PAGE 4 Approved sources of supply. Approved sources of supply are listed herein. Additional sources
10、will be added as they become available. The vendors listed below have agreed to this drawing and a certificate of compliance has been submitted to Defense Supply Center Columbus, ATTN: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990 or emailed to RFConnectordla.mil . DSCC drawing PIN Vendor similar
11、 PIN 1/ Vendor CAGE number 01014TBSA (3190-1144) Superseded by 1210320A001-001 00795 01014TBSB (3190-1165) Superseded by 1210311A001-001 01014TBSC (3190-1187) Superseded by 1210348A001-001 01014TBSD (3190-1192) Superseded by 1210300A001-001 01014TBSE (3190-1209) Superseded by 1210318A001-000 01014TB
12、SF (3190-1214) Superseded by 1210319A001-000 1/ Parts must be purchased to this DSCC PIN to assure all performance requirements and test are met. Vendor CAGE Vendor name number and address 00795 Delta Electronics 416 Cabot Street Beverly, MA 01915 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
