1、REVISIONS LTR DESCRIPTION DATE APPROVED A Update references, technical date, contact information, distribution statement. 24 April 2008 Abdonasser Abdouni B Updated Vendor PINs. 30 July 2009 Abdonasser Abdouni Prepared in accordance with ASME Y14.100 Source control drawing REV PAGE REV STATUS OF PAG
2、ES REV B A A B PAGE 1 2 3 4 PMIC N/A PREPARED BY DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 Ron Gary Original date of drawing 20 April 2001 CHECKED BY TITLE Lee Surowiec CONNECTOR, RECEPTACLE, ELECTRICAL, RF, SERIES TNC, JAMNUT MOUNTED, FOR LOW SMOKE CABLES APPROVED BY Rob Heber SIZE
3、CAGE CODE DWG. NO. 01015 A 037Z3 REV B PAGE 1 OF 4 AMSC N/A 5935-E832-012 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 01015 REV A PAGE 2 NOTES: 1. Dimensions a
4、re in inches. Metrics equivalents are in parenthesis. 2. Metric equivalents are given for reference purposes only. 3. All undimensioned pictorial configurations are for reference purposes only. 4. Series TNC, socket contact interface, in accordance with MIL-STD-348. 5. Wrench flats to accommodate st
5、d wrench opening in accordance with FED-STD-H28 appendix 10. 6. Full threads to within .063 (1.60 mm) of shoulder. FIGURE 1. General configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-399
6、0 SIZE CAGE CODE DWG NO. A 037Z3 01015 REV A PAGE 3 SCOPE: This document covers the requirements for radio frequency connectors accommodating special low smoke coaxial cables. REQUIREMENTS: These connectors shall conform to all the requirements of the latest issue of DSCC drawing 84148 and MIL-PRF 3
7、9012/28 and accommodate the cables listed in table I, with the following additions and exceptions. Electrical: Shall be in accordance with MIL-PRF-39012/28. Mechanical: Shall be in accordance with MIL-PRF-39012/28. Environmental: Shall be in accordance with MIL-PRF-39012/28. TABLE I. Cable accommoda
8、tion. Part or Identifying Number (PIN) 1/ 2/ Applicable cable 01015TBSA M17/220-00001 01015TBSB # M17/221-00001 01015TBSC & M17/222-00001 01015TBSD $ M17/223-00001 01015TBSE % M17/224-00001 01015TBSF M17/225-00001 1/ These connectors have captivated center contacts. 2/ These connectors are assembled
9、 using the MIL-C-22520/5 crimp tool and using the following crimp dies: M22520/5-05 # M22520/5-07 & M22520/5-29 $ M22520/5-25 % M22520/5-27 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE C
10、AGE CODE DWG NO. A 037Z3 01015 REV B PAGE 4 Approved sources of supply. Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed below have agreed to this drawing and a certificate of compliance has been submitted to Defense Supply C
11、enter Columbus, ATTN: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990 or emailed to RFConnectordla.mil . DSCC drawing PIN Vendor similar PIN 1/ Vendor CAGE number 01015TBSA (3190-851) Superseded by 1219320A591-000 00795 01015TBSB (3190-1156) Superseded by 1219311A591-001 01015TBSC (3190-1182) Super
12、seded by 1219348A591-000 01015TBSD (3190-1084) Superseded by 1219300A591-001 01015TBSE (3190-1204) Superseded by 1219318A591-000 01015TBSF (3190-861) Superseded by 1219319A591-000 1/ Parts must be purchased to this DSCC PIN to assure all performance requirements and test are met. Vendor CAGE Vendor name number and address 00795 Delta Electronics 416 Cabot Street Beverly, MA 01915 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
