1、 REVISIONS LTR DESCRIPTION DATE APPROVED Prepared in accordance with ASME Y14.100 Ancillary drawing REV STATUS REV OF PAGES PAGES 1 2 3 PMIC N/A PREPARED BY Erika P. Baker DESIGN ACTIVITY DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH Original date of drawing 9 June 2009 CHECKED BY Michael A. Radecki
2、TITLE TERMINAL SHIELD, RELAY (For use with NSN 5945-01-034-9909 Relay) APPROVED BY Michael A. Radecki SIZE A CODE IDENT. NO. 037Z3 DWG NO. 09018 REV PAGE 1 OF 3 AMSC N/A 5945-E142Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER,
3、COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 037Z3 DWG NO. 09018 REV PAGE 2 1. SCOPE 1.1 Scope. This drawing describes the requirements of relay terminal shield used with NSN 5945-01-034-9909 relay. 1.2 Part or Identifying Number (PIN). The complete PIN shall be as follows: 09018 | Drawing number 2
4、. APPLICABLE DOCUMENTS. This section is not applicable to this drawing. 3. REQUIREMENTS 3.1 Interface and physical dimensions. The interface and physical dimensions shall be as specified herein (see figure 1). 3.2 Material. ZYTEL 51SE-18K-40. ( - ZYTEL is a registered trademark of DuPont for its nyl
5、on resins.) 3.3 Marking. Mark “DANGER-HIGH VOLTAGE” on top with .125 inch (3.18 mm) letters. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. FIGURE 1. D
6、imensions and configuration. Inch mm Inch mm Inch mm .0312 0.7925 .1875 4.7625 .3438 8.7325 .0469 1.1913 .2031 5.1587 .375 9.525 .0625 1.5875 .2188 5.5575 .5312 13.4925 .125 3.175 .2344 5.9538 .5625 14.2875 .1562 3.9675 .2812 7.1425 2.25 57.15 .1719 4.3663 .3125 7.9375 DEFENSE SUPPLY CENTER,COLUMBUS
7、COLUMBUS, OHIOSIZEAREVCODEIDENTNO.037Z3PAGE 3DWGNO.0901840 .3750 .1562 40 40 40 .0312 .0469 40 40 20 2.25 DIA. .1250 DIA. .1719 DIA. .3750 DIA. .1562 DIA. .3125 .1562 .0625 .5312 .3438 R .2344 R .2188 R .5625 R .2812 R. .2031 R .0625 R. .1875 20 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
