1、REVISIONS LTR DESCRIPTION DATE APPROVED A Change marking requirement. Add caution note. 22 September 1988 R. Marbais B Change CAGE 14933 to 037SZ3. Remove CAGE 22526. Add CAGE 8N197. 3 October 2002 R. Heber Prepared in accordance with ASME Y14.100 REV PAGE REV B B B B REV STATUS OF PAGES PAGE 1 2 3
2、4 PREPARED BY PMIC N/A Gail Willis DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE Carl Dello-Stritto APPROVED BY Richard Marbais CONNECTORS, RECEPTACLE, ELECTRICAL, LATCH HOUSINGS, SINGLE ROW, .045 POSTS SIZE CAGE CODE 037Z3 DWG. NO. 86039 Original date of drawing 19 Sept
3、ember 1986 A REV B PAGE 1 OF 4 AMSC N/A 5935-E643-14 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Selected item drawing Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86039 DEFENSE SUP
4、PLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 2 Inches mm .154 3.90 .200 5.08 .638 16.20 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified, all tolerances are .005 (0.13 mm). FIGURE 1. Dimensions and configurat
5、ion. (SEE TABLE I) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86039 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 3 REQUIREMENTS: Shall meet the requirements of drawing number 86037. Design and
6、 construction: Dimensions and configuration: See figure 1 and table I. Interface: Drawing number 86107 contacts crimped to 20 AWG through 32 AWG wire, .200 inch (5.08 mm) centers, .045 inch (1.15 mm) square or round posts. Temperature range: -40C to +105C. Materials: Polyphenylene oxide-based resin
7、and shall meet the flammability requirements of UL 94 V-0. Dielectric withstanding voltage: 1,000 volts rms, 60 Hz, sea level. Contact retention: 6.5 pounds (3 Kg), minimum per position. Marking: The Part or Identifying Number (PIN) shall be marked on the housing and package in accordance with MIL-S
8、TD-1285. If size, surface conditions, or other design considerations dont allow for full marking on the part, marking on the package is only required. The PIN shall include the complete DSCC PIN, manufacturers name or CAGE code, and date code. The marking shall be permanent and legible in accordance
9、 with method 215 of MIL-STD 202. The PIN shall be constructed using the follow format: 86039 - XX DSCC drawing Number of positions number (see table I) TABLE I. Number of positions. Number of positions Dimension A (mm) 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 .348 (8.84) .548 (13.92) .748 (18.99
10、) .948 (24.08) 1.148 (29.16) 1.348 (39.24) 1.548 (39.32) 1.748 (44.40) 1.948 (49.48) 2.148 (54.56) 2.348 (59.64) 2.548 (64.72) 2.748 (69.80) 2.948 (74.88) 3.148 (79.96) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 8603
11、9 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 4 Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has been submit
12、ted to DSCC-VAI. DSCC drawing PIN Vendor CAGE number Vendor similar PIN 1/ 86039-02 8N187 65112-002-MIL 86039-03 8N187 65112-003-MIL 86039-04 8N187 65112-004-MIL 86039-05 8N187 65112-005-MIL 86039-06 8N187 65112-006-MIL 86039-07 8N187 65112-007-MIL 86039-08 8N187 65112-008-MIL 86039-09 8N187 65112-0
13、09-MIL 86039-10 8N187 65112-010-MIL 86039-11 8N187 65112-011-MIL 86039-12 8N187 65112-012-MIL 86039-13 8N187 65112-013-MIL 86039-14 8N187 65112-014-MIL 86039-15 8N187 65112-015-MIL 86039-16 8N187 65112-016-MIL 1/ Caution. Do not use this number for item acquisition. Items acquired to this number may not satisfy the performance requirements of this drawing. Vendor CAGE Vendor name number and address 8N187 T.T.I 4033 E. Bellknap Street Fort Worth, TX 76111-6600 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-