1、REVISIONS LTR DESCRIPTION DATE APPROVED A Add new vendor CAGE 28198, part numbers, on page 14. 2/2/88 R. Marbias B Figure 1, redraw configuration 3. 12/09/93 R. Larson C Change CAGE 14933 to 037Z3. Added hardware for size 75 and 104 position connectors. Remove source CAGE 97954. Editorial changes th
2、roughout. 1/22/04 R. Taylor Prepared in accordance with ASME Y14.100 REV C C PAGE 16 17 REV C C C C C C C C C C C C C C C REV STATUS OF PAGES PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PREPARED BY PMIC N/A Gail Willis DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE Carl Dell
3、o-Stritto APPROVED BY Richard Marbais CONNECTOR, RECEPTACLE, ELECTRICAL, RECTANGULAR, SUBMINIATURE, CRIMP REMOVABLE CONTACTS SIZE CAGE CODE 037Z3 DWG. NO. 86040 Original date of drawing 15 Sept 86 A REV C PAGE 1 OF 17 AMSC N/A 5935-E643-015Provided by IHSNot for ResaleNo reproduction or networking p
4、ermitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 2 REQUIREMENTS: Shall meet the requirements of MIL-DTL-28748, except as specified herein. Dimensions and configurations: See figures 1, 2, and 3. Mating conne
5、ctor: 86078. Resistance to test probe damage .145 inch (3.68 mm) .015 inch (0.38 mm) depth of insertion. Marking: Marking shall be in accordance with MIL-DTL-28748 except the DSCC Part or Identifying Number (PIN) shall be used in place of the M28748 PIN. 86040- XX X X 1A DSCC drawing Number of conta
6、cts Shield and shield Jackscrew or Contacts number (see figure 3) clamp location or guide pins retaining plate (see figure 1)(see figure 1)Insert arrangements and number Shield and shield clamp location of contacts (see figure 3) or retaining plate (see figure 1) 09 1 Top opening per configuration D
7、 11 2 Side opening per configuration D 29 3 - None included 75 104 Jackscrews or guidepins Contacts (see figure 1) A - Guide pins Per MIL-C-39029/35-441 B - Short knobless jackscrews 1A - 100 percent size 22 C - Short jackscrews D - Long jackscrews E - Fixed jackscrews QUALIFICATION: Not required. C
8、ontacts: MIL-C-39029/35-441. Crimp tool: M22520/2-01. Installing and removal tools: MIL-I-81969/18 and /20. Positioner: Astro Tool (58164) p/n 615695 or Daniels Manufacturing Corp. (11851) p/n K280, or equivalent. Provided by IHSNot for ResaleNo reproduction or networking permitted without license f
9、rom IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 3 Connector assembly FIGURE 1. Connector with guide pins, jackscrews, and shields. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZ
10、E CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 4 Configuration A is not applicable to sizes 75 and 104 inserts Configuration A. Connector with guide pins. Configuration A1 is applicable to sizes 75 and 104 inserts Configuration A1. Connector with
11、 guide pins. FIGURE 1. Connector with guide pins, jackscrews, and shields - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 5 Configura
12、tion B is not applicable to 75- and 104- position connectors Configuration B. Connector with knobless short turnable jackscrews. Configuration B1 is applicable to 75- and 104- position connectors Configuration B1. Connector with knobless short turnable jackscrews. FIGURE 1. Connector with guide pins
13、 jackscrews, and shields - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 6 Configuration C is not applicable to 75- and 104- positio
14、n connectors. Configuration C. Connector with short turnable jackscrews. FIGURE 1. Connector with guide pins, jackscrews, and shields - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTE
15、R, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 7 Configuration C1 is applicable to 75- and 104- position connectors. Configuration C1. Connector with short turnable jackscrews. FIGURE 1. Connector with guide pins, jackscrews, and shields - Continued. Provided by IHSNot for ResaleNo reproduction or
16、 networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 8 Configuration D is not applicable to 75- and 104-position connectors. Configuration D. Connector with long turnable jackscrews and shield. FIGU
17、RE 1. Connector with guide pins, jackscrews, and shields - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 9 Configuration E. Connector
18、 with fixed jackscrews. Configuration E is not applicable to 75- and 104- position connectors. FIGURE 1. Connector with guide pins, jackscrews, and shields - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 8604
19、0 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 10 Configuration E1 is applicable to 75- and 104- position connectors. Configuration E1. Connector with fixed jackscrews. Inches mm Inches mm Inches mm .000 .005 .007 .015 .020 .030 .040 .046 .055 .062 .078 .086 .090 .093 0.00 0.
20、13 0.18 0.38 0.51 0.76 1.00 1.17 1.40 1.57 1.98 2.18 2.28 2.36 .110 .115 .125 .141 .146 .150 .156 .187 .195 .200 .210 .255 .280 .500 2.79 2.92 3.18 3.58 3.71 3.81 3.96 4.75 4.95 5.08 5.33 6.48 7.11 12.70 .531 .580 .585 .600 .620 .625 .680 .690 .720 .750 .810 .920 .960 1.050 13.49 14.73 14.86 15.24 1
21、5.75 15.88 17.27 17.53 18.29 19.05 20.57 23.37 24.38 26.67 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances are .003 (0.08 mm). FIGURE 1. Connector with guide pins, jackscrews, and shields - Continued. Provided by IHS
22、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 11 Inches mm .059 .062 .073 .075 .077 .080 .305 .315 .490 1.50 1.57 1.85 1.91 1.96 2.03 7.75 8.00 12.45 NOTES: 1.
23、 Dimensions are in inches. 2. Metric equivalents are given for information only. FIGURE 2. Insert hole configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 4321
24、6-5000 A REV C PAGE 12 FIGURE 3. Insert arrangements. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 13 MATING FACE OF FEMALE CONNECTOR FIGURE 3.
25、 Insert arrangements - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 14 MATING FACE OF FEMALE CONNECTOR FIGURE 3. Insert arrangements
26、 - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 15 MATING FACE OF FEMALE CONNECTOR FIGURE 3. Insert arrangements - Continued. Provid
27、ed by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 16 Inches mm Inches mm .003 .004 .005 .008 .015 .02 .091 .130 .171 .21 .270 .310 .50 0.08 0.10 0.13 0.20
28、 0.38 0.5 2.31 3.30 4.34 5.3 6.86 7.87 12.7 .532 .656 .750 .781 .875 1.094 1.130 1.34 1.375 1.503 1.680 1.750 2.055 13.51 16.66 19.05 19.84 22.23 27.79 28.70 34.0 34.93 38.18 42.67 44.45 52.20 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwi
29、se specified, tolerances are .02 (0.50 mm) for two place decimals and .015 (0.38 mm) for three place decimals. 4. Tolerance between any two adjacent contact centers shall be .004 (0.10 mm). Tolerance between any two contact center, other than adjacent contacts, shall be .006 (0.15 mm). 5. Contact le
30、tter identification may be located on either side of the contact hole. All letters shall appear on the front and rear face of each insert. 6. Inserts shall be used with guide pin assemblies or jackscrew assemblies. 7. Insert material: Shall be in accordance with MIL-DTL-28748. 8. Shape of .008 inch
31、0.20 mm) pads optional. FIGURE 3. Insert arrangements - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86040 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV C PAGE 17 Approved sources of supply
32、are listed herein. Additional sources will be added as they become available. The vendors listed herein have agreed to this drawing and certifications of compliance have been submitted to DSCC-VAI. DSCC drawing PIN Vendor CAGE number Vendors similar PIN 1/ 86040-09XX1A 86040-11XX1A 86040-29XX1A 8604
33、0-75XX1A 86040-104XX1A 95238 MMM09XXX MMM11XXX MMM29XXX MMM75XXX MMM104XXX 86040-09XX1A 86040-75XX1A 86040-104XX1A 28198 SGMC09XX SGMC75XX SGMC104XX 1/ Caution: Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Vendor CAGE number Vendor name and address 95238 Continental Connector Corporation 53 La France Avenue Bloomfield, NJ 07003-5632 28198 Positronic Industries, Incorporated 423 N. Campbell Street P.O. Box 8247 Springfield, MO 65801-8247 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
