1、REVISIONS LTR DESCRIPTION DATE APPROVED A Add new vendor CAGE 28198, part numbers, on page 14. 2/2/88 R. Marbias B Change CAGE 14933 to 037Z3. Added hardware for size 75 and 104 position connectors. Remove source CAGE 97954. Editorial changes throughout. 1/22/04 R. TaylorPrepared in accordance with
2、ASME Y14.100 REV B B PAGE 16 17 REV B B B B B B B B B B B B B B B REV STATUS OF PAGES PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PREPARED BY PMIC N/A Gail Willis DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE Carl Dello-Stritto APPROVED BY Richard Marbais CONNECTORS, PLUG,
3、ELECTRICAL, RECTANGULAR, SUBMINIATURE, CRIMP REMOVABLE CONTACTS SIZE CAGE CODE 037Z3 DWG. NO. 86078 Original date of drawing 15 Sept 86 A REV B PAGE 1 OF 17 AMSC N/A 5935-E643-48.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO.
4、037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 2 REQUIREMENTS: Shall meet the requirements of MIL-DTL-28748, except as specified herein. Dimensions and configurations: See figures 1, 2, and 3. Mating connector: 86040. Marking: Marking shall be in accordance with MIL
5、-DTL-28748 except the PIN shall be used in place of the M28748 PIN. 86078- XX X X 1A DSCC drawing Number of contacts Shield and shield Jackscrew or Contacts number (see figure 3) clamp location or guide pins retaining plate (see figure 1)(see figure 1)Insert arrangements and number Shield and shield
6、 clamp location of contacts (see figure 3) or retaining plate (see figure 1) 09 1 - Top opening in accordance with configuration D 11 2 - Side opening in accordance with configuration D 29 3 - None included 75 104 Jackscrews or guidepins Contacts (see figure 1) A - Guide pins In accordance with MIL-
7、C-39029/34-440 B - Short knobless jackscrews 1A - 100 percent size 22 C - Short jackscrews D - Long jackscrews E - Fixed jackscrews QUALIFICATION: Not required. Contacts: MIL-C-39029/34-440. Crimp tool: M22520/2-01. Installing and removal tools: MIL-I-81969/18 and /20. Positioner: Astro Tool (58164)
8、 p/n 614412 or Daniels Manufacturing Corp. (11851) p/n K187 (commercial contact data plate) or K280 (military contact data plate), or equivalent. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER
9、, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 3 Connector assembly FIGURE 1. Connector with guide pins, jackscrews, and shields. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLU
10、MBUS, OH 43216-5000 A REV B PAGE 4 Configuration A not applicable to sizes 75 and 104 inserts Configuration A. Connector with guide pins. Configuration A1 applicable to sizes 75 and 104 inserts Configuration A1. Connector with guide pins. FIGURE 1. Connector with guide pins, jackscrews, and shields
11、- Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 5 Configuration B is not applicable to 75- and 104- position connectors Configuration
12、 B. Connector with knobless short turnable jackscrews. Configuration B1 is applicable to 75- and 104- position connectors Configuration B1. Connector with knobless short turnable jackscrews. FIGURE 1. Connector with guide pins, jackscrews, and shields - Continued. Provided by IHSNot for ResaleNo rep
13、roduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 6 Configuration C is not applicable to 75- and 104- position connectors. Configuration C. Connector with short turnable jackscrews. F
14、IGURE 1. Connector with guide pins, jackscrews, and shields - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 7 Configuration C1 is app
15、licable to 75- and 104- position connectors. Configuration C1. Connector with short turnable jackscrews. FIGURE 1. Connector with guide pins, jackscrews, and shields - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO.
16、037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 8 Configuration D is not applicable to 75- and 104- position connectors. Configuration D. Connector with long turnable jackscrews and shield. FIGURE 1. Connector with guide pins, jackscrews, and shields - Continued. Pro
17、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 9 Configuration E is not applicable to 75- and 104- position connectors. Configuration E. Connector w
18、ith fixed jackscrews. FIGURE 1. Connector with guide pins, jackscrews, and shields - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 10
19、 Configuration E1 is applicable to 75- and 104- position connectors. Configuration E1. Connector with fixed jackscrews. Inches mm Inches mm Inches mm .000 .005 .007 .015 .020 .030 .040 .046 .055 .062 .078 .086 .090 .093 0.00 0.13 0.18 0.38 0.51 0.76 1.00 1.17 1.40 1.57 1.98 2.18 2.28 2.36 .110 .115
20、.125 .141 .146 .150 .156 .187 .195 .200 .210 .255 .280 .500 2.79 2.92 3.18 3.58 3.71 3.81 3.96 4.75 4.95 5.08 5.33 6.48 7.11 12.70 .531 .580 .585 .600 .620 .625 .680 .690 .720 .750 .810 .920 .960 1.050 13.49 14.73 14.86 15.24 15.75 15.88 17.27 17.53 18.29 19.05 20.57 23.37 24.38 26.67 NOTES: 1. Dime
21、nsions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances are .003 (0.08 mm). FIGURE 1. Connector with guide pins, jackscrews, and shields - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license fro
22、m IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 11 Inches mm .059 .062 .073 .075 .077 .080 .305 .315 .490 1.50 1.57 1.85 1.91 1.96 2.03 7.75 8.00 12.45 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for informatio
23、n only. FIGURE 2. Insert hole configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 12 FIGURE 3. Insert arrangements. Provided by IHSNot
24、for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 13 WIRING FACE OF MALE CONNECTOR FIGURE 3. Insert arrangements - Continued. Provided by IHSNot for ResaleNo reproduct
25、ion or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 14 WIRING FACE OF MALE CONNECTOR FIGURE 3. Insert arrangements - Continued. Provided by IHSNot for ResaleNo reproduction or networking perm
26、itted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 15 WIRING FACE OF MALE CONNECTOR FIGURE 3. Insert arrangements - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license
27、from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 16 Inches mm Inches mm .003 .004 .005 .008 .015 .02 .091 .130 .171 .21 .23 .270 .310 0.08 0.10 0.13 0.20 0.38 0.5 2.31 3.30 4.34 5.3 5.8 6.86 7.87 .50 .532 .656 .750 .781 .875 1.094 1
28、.130 1.34 1.375 1.503 1.680 1.750 2.055 12.7 13.51 16.66 19.05 19.84 22.23 27.79 28.70 34.0 34.93 38.18 42.67 44.45 52.20 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances are .02 inch (0.50 mm) for two place decimals
29、and .015 inch (0.38 mm) for three place decimals. 4. Tolerance between any two adjacent contact centers shall be .004 (0.10 mm). Tolerance between any two contact center, other than adjacent contacts, shall be .006 (0.15 mm). 5. Contact letter identification may be located on either side of the cont
30、act hole. All letters shall appear on the front and rear face of each insert. 6. Inserts shall be used with guide pin assemblies or jackscrew assemblies. 7. Insert material: Shall be in accordance with MIL-DTL-28748. 8. Shape of .008 inch (0.20 mm) pads optional. FIGURE 3. Insert arrangements - Cont
31、inued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 86078 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV B PAGE 17 Approved sources of supply are listed herein. Additional sources will be added as they b
32、ecome available. The vendors listed herein have agreed to this drawing and certifications of compliance have been submitted to DSCC-VAI. DSCC drawing Part of Identifying Number (PIN) Vendor CAGE number Vendors similar PIN 1/ 86078-09XX1A 86078-11XX1A 86078-29XX1A 86078-75XX1A 86078-104XX1A 95238 MMM
33、09XXX MMM11XXX MMM29XXX MMM75XXX MMM104XXX 86078-09XX1A 86078-75XX1A 86078-104XX1A 28198 SGMC09XX SGMC75XX SGMC104XX 1/ Caution: Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Vendor CAGE number Vendor name and address 95238 Continental Connector Corporation 53 La France Avenue Bloomfield, NJ 07003-5632 28198 Positronic Industries, Incorporated 423 N. Campbell Street P.O. Box 8247 Springfield, MO 65801-8247 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
