1、REVISIONS LTR DESCRIPTION DATE APPROVED A Change marking requirement. Add caution note. 22 September 1988 R. Marbais B Change marking requirement. Change 86103 wire size from “36” to “32”. 15 May 1990 R. Marbais C Change CAGE 14933 to 037SZ3. Remove references to DESC and change to DSCC. Editorial c
2、hanges throughout. 3 October 2002 R. Heber D Updating CAGE (8N187) Part or Identifying Numbers (PIN). Editorial changes throughout. 13 October 2010 Abdo Abdouni Prepared in accordance with ASME Y14.100 Source control drawing REV PAGE REV STATUS OF PAGES REV D D D D PAGE 1 2 3 4 PMIC N/A PREPARED BY
3、DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43218-3990 Gail Willis Original date of drawing 28 October 1986 CHECKED BY TITLE Carl Dello-Stritto CONNECTOR, RECEPTACLE, ELECTRICAL, LATCH HOUSINGS, DOUBLE ROW, BULKHEAD MOUNT, .025 POSTS APPROVED BY Richard Marbais SIZE CAGE CODE DWG. NO. 86108 A 037
4、Z3 REV D PAGE 1 OF 4 AMSC N/A 5935-E831-009 CURRENT DESIGN ACTIVITY CAGE CODE 037Z3 HAS CHANGED NAMES TO: DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 432
5、18-3990 SIZE CAGE CODE DWG NO. A 037Z3 86108 REV D PAGE 2 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, all tolerances are .005 (0.13 mm). FIGURE 1. Dimensions and configuration. (SEE TABLE I) (SEE TABLE I) Inches mm .010 0.2
6、5 .038 0.97 .050 1.27 .065 1.65 .100 2.54 .125 3.18 .175 4.45 .200 5.08 .435 11.05 .545 13.84 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 86108 REV D PAGE 3 RE
7、QUIREMENTS: Shall meet the requirements of drawing number 86037. Design and construction: Dimensions and configuration: See figure 1 and table I. Interface: DSCC drawing 86103 receptacle contacts crimped to 22 AWG through 32 AWG wire, .100 inch (2.54 mm) centers, .045-inch (1.15 mm) square or round
8、posts. Polarization pin see drawing 87121. Temperature range: -40C to +105C. Materials: Polyphenylene oxide based resin and shall meet the flammability requirements of UL 94 V-0. Dielectric withstanding voltage: 1,000 volts rms, 60 Hz, sea level. Contact retention: 6.5 pounds (3 Kg), minimum per pos
9、ition. Marking: The Part or Identifying Number (PIN) shall be marked on the housing and package in accordance with MIL-STD-1285. If size, surface conditions, or other design considerations dont allow for full marking on the part, marking on the package is only required. The PIN shall include the com
10、plete DSCC PIN, manufacturers name or CAGE code, and date code. The marking shall be permanent and legible in accordance with method 215 of MIL-STD 202. The PIN shall be constructed using the follow format: 86108 - XX DSCC drawing Number of positions number (see table I) TABLE I. Number of positions
11、 Number of positions Dimension A (mm) Dimension B (mm) Number of positions Dimension A (mm) Dimension A (mm) 04 06 08 10 12 14 16 18 20 22 24 26 28 .710 (18.03) .810 (20.57) .910 (23.11) 1.010 (25.65) 1.110 (28.19) 1.210 (30.73) 1.310 (33.27) 1.410 (35.81) 1.510 (38.81) 1.610 (40.89) 1.710 (43.48)
12、1.810 (45.97) 1.910 (48.51) .450 (11.43) .550 (13.97) .650 (16.51) .750 (19.05) .850 (21.59) .950 (24.13) 1.050 (26.67) 1.150 (29.21) 1.250 (31.75) 1.350 (34.29) 1.450 (36.33) 1.550 (39.37) 1.650 (41.91) 30 32 34 36 38 40 42 44 46 48 50 52 54 56 2.010 (51.05) 2.110 (53.59) 2.210 (56.13) 2.310 (58.67
13、) 2.410 (61.21) 2.510 (63.75) 2.610 (66.29) 2.710 (68.83) 2.810 (71.37) 2.910 (73.91) 3.010 (76.45) 3.110 (78.99) 3.210 (81.53) 3.310 (84.07) 1.750 (44.45) 1.850 (46.99) 1.950 (49.58) 2.050 (52.07) 2.150 (54.61) 2.250 (64.77) 2.350 (59.69) 2.450 (62.23) 2.550 (64.77) 2.650 (67.81) 2.750 (69.85) 2.85
14、0 (72.39) 2.950 (74.93) 3.050 (77.47) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 86108 REV D PAGE 4 Approved sources of supply are listed herein. Additional s
15、ources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has been submitted to DSCC-VAI. DSCC drawing PIN Vendor CAGE number Vendor similar PIN 1/ 86108-04 8N187 65817-007LF-MIL 86108-06 8N187 65817-008L
16、F-MIL 86108-08 8N187 65817-009LF-MIL 86108-10 8N187 65817-010LF-MIL 86108-12 8N187 65817-011LF-MIL 86108-14 8N187 65817-012LF-MIL 86108-16 8N187 65817-001LF-MIL 86108-18 8N187 65817-013LF-MIL 86108-20 8N187 65817-002LF-MIL 86108-22 8N187 65817-014LF-MIL 86108-24 8N187 65817-015LF-MIL 86108-26 8N187
17、65817-003LF-MIL 86108-28 8N187 65817-016LF-MIL 86108-30 8N187 65817-017LF-MIL 86108-32 8N187 65817-004LF-MIL 86108-34 8N187 65817-018LF-MIL 86108-36 8N187 65817-019LF-MIL 86108-38 8N187 65817-020LF-MIL 86108-40 8N187 65817-005LF-MIL 86108-42 8N187 65817-021LF-MIL 86108-44 8N187 65817-006LF-MIL 86108
18、46 8N187 65817-022LF-MIL 86108-48 8N187 65817-023LF-MIL 86108-50 8N187 65817-024LF-MIL 86108-52 8N187 65817-025LF-MIL 86108-54 8N187 65817-026LF-MIL 86108-56 8N187 65817-027LF-MIL 1/ Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Vendor CAGE Vendor name number and address 8N187 T.T.I 2601 Sylvania Cross Dr Fort Worth, TX 76137 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
