1、NOTICE OF REVISION (NOR) a. CURRENT 1. DATE (WMMDD) b. NEW This revision described below has been authorized for the document listed. 04-05-07 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing d
2、ata sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington
3、 Headquarters SeMces. Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget. Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER
4、OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM. a. (X one) 4. ORIGINATOR : X (1) Existing document supplemented by the NOR may be used in manufacture. a. TYPED NAME (First, Middle Initi
5、al, Last) Jeffery Tunstall b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENT DSCC-VAI b. ADDRESS (Street, City, State, Zip Code) Defense Supply Center Columbus 3990 East Broad Street Columbus, Ohio 43216-5000 c. TYPED NAME (First, Middle Initial, Last) Richard L. Taylor 9. TITLE OF DOCUMENT AD
6、APTER, THRU BULKHEAD MOUNTING, RFI/EMI ENVIRONMENTAL, STRAIN RELIEF. ALL 12. CONFIGURATION ITEM (OR SYSTEM)TO WHICH ECP APPLIES d. TITLE CHIEF, INTERCONNECTION DEVICES 15a. ACTIVITY ACCOMPLISHING REVISION DSCC-VA 1 Form Approved O1 88 OMB NO. 0704- e. SIGNATURE f. DATE SIGNED (04-05-07) Richard L. T
7、aylor b. REVISION COMPLETED (Signature) c. DATE SIGNED (04-05-07) Jeffery Tunstall 2. PROCURING ACTIVITY NO. I-: 3 DODAAC 5. CAGE CODE 03723 6. NOR NO. 5935-R032-03 7. CAGE CODE 8. DOCUMENT NO. 03723 92015 ECP NO. 10. REVISION LETTER B I C I NIA 13. DESCRIPTION OF REVISION Page 4, Dash number 28, di
8、mension F: Delete “2.255” and substitute “2.407”. Page 4, Dash number 28, dimension H: Delete “1.938” and substitute “2.470. Page 6: Change Glenairs cage code from: “6324” to: “06324. I 1 I (2) Revised document must be received before manufacturer may incorporate this change. I I I (3) Custodian of
9、master document shall make above revision and furnish revised document. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- REVISIONS LTR A B DESCRIPTION DATE APPROVED Correct figure 1 to clarify length of body. Correct “F max diameter on dash numbers 1
10、6 and 20. Editorial changes throughout. Update format. 16 July 02 Robert Heber Correcting references. Correcting address list of sources. 7 Dec 93 Randy Larson Prepared in accordance with ASME Y14.100 ZEV AG E MIC NIA Original date of drawing 26 January 1993 PREPAREDBY Jefferv Tunstall CHECKED BY Ab
11、do Abdouni APPROVEDBY Robert Heber SIZE I CAGECODE DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 TITLE ADAPTOR, THRU BULKHEAD MOUNTING, RFIIEMI ENVI RON M ENTAL, STRAN RELIEF DWG. NO. 9201 5 PAGE 1 OF 7 AMSC NIA 5935-E671 Provided by IHSNot for ResaleNo reproduction or networking permitt
12、ed without license from IHS-,-,-V THREAD TYP) COMPRESSION RING CABLE CLAMP .125 MAX PANEL FLANGE DESIGN SHAPE 1 OPTIONAL A = BODY LENGTH WITHOUT CABLE CLAMP TYPE 1 SHOWN, ENVIRONMENTAL ONLY 7 RFI RINGS ADAPTER 4 .781 119.841 MAX TYPE 2 RFI ONL NUT Y I OPT I ONAL 1 FIGURE 1. Dimensions and confiaurat
13、ions. CAGE CODE DWG NO. 03723 9201 5 A DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 4321 6-5000 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-V THREAD 2.88MAX GLAND A DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 OR SIZE A 71 ,- COMPRESSI
14、ON RING dv 173.2) r- RFI RINGS NUT T 1 F 4 ,781 (19.841 MAX TYPE 3 RFI AND ENVIROMENTAL NOTE 3) ADAPTERA +- D - OPT IONAL) TYPE 4 STRAIN RELIEF ONLY FIGURE 1. Dimensions and confiqurations - Continued. CAGE CODE 03723 REV B DWG NO. 9201 5 PAGE 3 Provided by IHSNot for ResaleNo reproduction or networ
15、king permitted without license from IHS-,-,-Dash 1 Cable number accommodation I Ax I Ax I ,ax I Ax I ,ax H max dim .906 (23.01) .1.031 (26.19) 1.156 (29.36) 1.281 (24.61) 1.406 (26.97) 1.593 (40.46) 1.843 (34.93) 2.156 (54.76) 2.406 (44.45) 1.938 (42.23) 2.906 (55.58) 3.406 (57.53) M +.O15 -.O00 dia
16、 515 (13.08) .640 (16.26) .765 (1 9.43) .890 (22.61) 1.015 (25.78) 1.203 (30.56) 1.453 (36.91) 1.765 (44.83) 2.015 (51.18) 2.265 (57.53) 2.515 (63.88) 3.015 (76.58) range Min 1 Max dim dia dim dia dia 16 FIGURE 1. Dimensions and confiaurations - Continued. .625 .937 1.031 1.719 1.062 1.562 1.969 (15
17、88) (23.80) (26.19) (43.66) (26.91) (39.67) (50.01) V unified 2A thread 32 40 .500 - 28 1.550 1.875 1.095 2.969 1.781 2.755 3.250 (39.37) (47.63) (27.81) (75.41) (45.24) (47.63) (82.55) 1.875 2.250 1.220 3.531 1.781 3.255 3.890 (47.63) (57.15) (30.99) (89.69) (45.24) (60.33) (98.81) .625 - 24 .750
18、 20 .875 - 20 1 .o00 - 20 1.188 - 18 1.438 - 18 1.750 - 18 2.000 - 18 2.250 - 16 2.500 - 16 3.000 - 16 CAGE CODE DWG NO. 03723 9201 5 A DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 4321 6-5000 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PANEL CU
19、TOUT CAGE CODE NOTES: 1. Dimensions are in inches. Metric equivalents are in parentheses. 2. Dimensions apply after plating. 3. Types 3 assemblies, the gland and RFI tings may be interchanged for environment armor shield termination. DWG NO. FIGURE 1. Dimensions and conficiurations - Continued. DEFE
20、NSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 4321 6-5000 SIZE A 03723 I 92015 REV B I PAGE 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-REGUIREMENTS Type 1: Shall be in accordance with MIL-C-85049, category IA. Type 2: Shall be in accordance with MI
21、L-C-85049, category 3A. Type 3: Shall be in accordance with MIL-C-85049, category IA. Type 4: Shall be in accordance with MIL-C-85049, category 4B. Dimensions and constructions: See figure 1. Material: Accessory components: Aluminum alloy shall be in accordance with MIL-C-85049. Gland and O-ring sha
22、ll be in accordance with MIL-C-85049. Finish: A, N, and W shall be in accordance with MIL-(2-85049. Finish N is for space applications only. Part or Identifying Number (PIN): The PIN shall be in accordance with the following: 9201 5- - 16 - W - 3 - C Drawing number Dash number I l Finish I 1 - Envir
23、onmental only. 2 - Shield termination only. 3 - Shield termination and environmental. 4 - Nonshield termination and nonenvironmental. Nut option C - Clamp (clamp supplied is MIL-C-85049/41) A - No nut or clamp N - Nut Marking: Marking shall be in accordance with MIL-(2-85049 except the PIN shall be
24、as stated above. CAGE CODE DWG NO. 03723 9201 5 A DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 4321 6-5000 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-QUALIFICATION: Qualification inspection: Qualification inspection for the adapter specified her
25、ein shall not be required. Qualification conformance inspection: Shall be in accordance with MIL-C-85049. Inspection of packaging: Shall be in accordance with MIL-C-85049. Methods of inspection: Shall be in accordance with MIL-C-85049. Approved sources of supply. Approved sources of supply are liste
26、d herein. Additional sources will be added as they become available. The vendors listed herein have agreed to this drawing and a certificate of compliance has been submitted to DSCC-VAI. 9201 5-* 31461 FASO-1 XXXXX - I/ Parts must be purchased to this DSCC PIN to assure that all performance requirem
27、ents and tests are met. Vendor CAGE Vendor name number and address 06324 Glenair, Incorporated 121 1 Air Way Glendale, CA 91201 O7418 31461 Sunbank Electronics Incorporated 1740 Commerce Way Paso Robles. CA 93446 Electro Adapter, Incorporated. 20640 Nordhoff Street P.O. Box 2560 Chatsworth, CA 9131 1 CAGE CODE DWG NO. 03723 9201 5 A DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 4321 6-5000 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
