1、REVISIONS LTR DESCRIPTION DATE APPROVED A Changed CAGE 14933 to 037Z3. Editorial changes throughout. 12/12/01 Robert M. Heber Prepared in accordance with MIL-STD-100 REV PAGE REV A A A A REV STATUS OF PAGES PAGE 1 2 3 4 PREPARED BY PMIC N/A William Carpenter DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS,
2、 OHIO 43216-5000 CHECKED BY TITLE Carl Dello-Stritto APPROVED BY Randy Larson CONNECTOR, PLUG, ELECTRICAL, JUMPER SHUNT SIZE CAGE CODE 037Z3 DWG. NO. 93029 Original date of drawing 5 January 1994 A REV A PAGE 1 OF 4 AMSC N/A 5935-E643-39 DISTRIBUTION STATEMENT A. Approved for public release; distrib
3、ution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 93029 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 2 Inches mm .0254 .0375 .041 .049 .125 0.645 0.953 1.04 1.24 3.17 NOTES: 1. Di
4、mensions are in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified all tolerances are .005 (0.13 mm). FIGURE 1. Dimensions and configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE C
5、ODE DWG NO. 037Z3 93029 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 3 REQUIREMENTS: Design and configuration: Dimensions and configuration: See figure 1 and table I. Temperature range: -55C to +200C. Operating voltage: 600 volts continuous. Current rating: 1.6 amperes at +60
6、C. Materials: Insulator: White teflon in accordance with NEMA HP3. Pin: 22 solid gauge copper wire. Plating: Silver, in accordance with ASTM B298. Insulation resistance: 2,000 megohms minimum insulation resistance per 1000 ft at 20C at 90 percent relative humidity. Solderability: MIL-STD-202, method
7、 208, no steam aging. Dielectric withstanding voltage: 2.0 kV rms for 5 seconds. TABLE I. Shunt dimensions. Dash number Jump length “A” Insulator length “B” 01 02 03 04 05 .100 .300 .400 .500 .600 (2.54) (7.62) (10.16) (12.70) (15.24) .085 .275 .375 .475 .575 (2.16) (6.99) (9.53) (12.07) (14.61) Pro
8、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 93029 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 4 Marking: The Part or Identifying Number (PIN) shall be marked on the package in accordance with MIL
9、STD-1285. The marking shall include the complete DSCC PIN, manufacturers name or CAGE code, and date code. The PIN shall be constructed using the following format: Example: 93029 XX Drawing number Jumper length dash number (see table I) Approved source of supply: An approved source of supply is lis
10、ted herein. Additional sources will be added as they become available. The vendor listed on the requirements drawing has agreed to this drawing and a certificate of compliance has been submitted to DSCC-VAI. Vendor similar PIN 1/ DSCC drawing PIN CAGE 55322 93029-01 JL-100-25-T 93029-02 JL-300-25-T
11、93029-03 JL-400-25-T 93029-04 JL-500-25-T 93029-05 JL-600-25-T 1/ Caution. Do not use this number for item acquisition. Items acquired to this number may not satisfy the performance requirements of this drawing. Vendor CAGE Vendor name number and address 55322 Samtec, Incorporated 810 Progress Blvd. New Albany, IN 47150-2257 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
