1、7 MIL-i.on with specific procurement: functions should be obtained from the procuring activity or as directed by the contracting officer.) 2.2 Other publications. The following documents form a part of this specification to the extent specified hereh, Unless otherwise indicated, the fasue in effect
2、on date of invitation for bids or request for proposal shall apply: National Motor Freight Traffic Association, Inc., Agent National Motor Freight Classification (Application for copies should be addressed to the American Trucking hsociations, Inc., Tariff Order Section, 1616 P Street, N.W., Washing
3、ton, DC 20036 ) 1“ I Uniform Classification Committee, Agent Uniform Freight Classification (Application for copies should be addressed to the Uniform Classification Cdttee, Room 1106, 222 South Riverside Plaza, Chicago, IL 60606.) 3, REQUIREMENTS 1 * 3.1 Specification sheets. The individual item re
4、quirements shall be as specified herein and in accordance with the applicable specification sheets. the event of any conflict between requirements of thie specification and the specification sheet, the latter shall govern. In 2 Provided by IHSNot for ResaleNo reproduction or networking permitted wit
5、hout license from IHS-,-,-1 -_ _ - - -_ .- - MIL-B-LI343bC 77 W 7777706 04582b6 7 - MIL-B-43436C 3.2 Material. Band markers shall be fabricated of aluminum. Aluminum shall conform to alloy 1100, temper O or F of OQ-A-25011 or alloy 3003, temper H 14-16 of W-A-250/2. The thickness of the aluminum sha
6、ll be a minimum of 0,0126 (28 gage) * 3.3 Construction. The band marker shall conform to the design, details, and dimensions shown on specification sheets listed in section 2, and speci- fied herein. inch for fractions and whole numbers, or + - 0.015 inch for decimals. Except as otherwise specified,
7、 tolerances shall be t 1/32 * 3.4 Finish. Unless otherwise specified in the specification sheets, the band markers shall have a smooth, clean, natural aluminum finish. for colored markers shall conform to FED-STD-595. Colors * 3.5 Workmanship. The band markers shall be clean and smooth and shall hav
8、e no cracks, burrs, sharp edges, cuts, tears, holes, nicks, scratches, stains ; streaks or lumps. or peeling when tested as specified in 4.3.1. Colored markers shall show no evidence of cracking, crazing, 4. OUALIT ASSURANCE PROVISIONS 4.1 Responsibility for inspection. Unless otherwise specified in
9、 the Except as otherwise contract or purchase order, the contractor is-responsible for the performance of all inspection requirements as specified herein. specified in the contract or order, the contractor may use his own or any other facilities suitable for the performance of the inspection require
10、ments speci- fied herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 quality conformance i
11、nspection. Except as otherwise specified herein, sampling for inspection shall be performed in accordance with the provisions set forth in MIL-SIID-105. 4.2.1 Component and material inspection. In accordance with 4.1 above, components and materials shall be inspected and tested in accordance with al
12、l the requirements of referenced specifications, drawings and standards unless otherwise excluded, amended, modified, or qualified in this specification or applicable purchase document. 4.2.2 End item inspection. The inspection lot shail consist of all band markers of the same part number offered fo
13、r inspection at one time. sample- unit shall be one complete band marker. The 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_I- flIL-B-q3q3hC 99 - 7777906 Oq58267 o - .L - - - MIL-B-43436C J 4.2.2.1 Visual examination. The band markers shall be e
14、xamined for defects in table I, level (AOL) of 2.5 for major defects and 6,s for total defects, expressed in terms of defects per hundred units. The inspection level shall be 11, with an acceptable quality TABLE I. Classification of defects -. - Classification- Examination 1_ Defect Major Minor Not
15、specified color or colors, Not natural aluminum finish, when applicable X when applicable X Wu ricma ns h ip Any tear, cut, hole, crack, Any stain, streak, or lump Sharp edge X Edge nicked, burred, or uneven X scratch or crease X X Examine Defect Markings bmitted; incorrect; illegible; of improper s
16、ize, Materials location, sequence or method of application defect ive Any component missing, damaged or otherwise 4 4.2.2.2 Dimensional examination. Examination shall be made for compliance Any dimension not as specified shall be a defect. with specified dimensions. The inspaction level shall be S-4
17、 with an AQL of 4.0 defects, expressed in terms of defects per hundred units. 4.2.2.3 End item testinE. Colored band markers shall be tested as speci- inspection level shall be S-2 with an AOL of 2.5 defects, expressed in terms of defects per hundred units. that packaging, packing and marking, as re
18、quired by section 5 are complied with. Defects shall be as indicated in table II. shipping container fully prepared for delivery, except that it need not be sealed. one time. terms of defects per hundred units. fied in 4.3.1, Sample unit shall be one completely fabricated band. The 6 4.2.3 Examinati
19、on of packaging. An examination shall be made to determine The sample unit shall be one The lot shall be the number of containers offered for inspection at The inspection level shall be S-2 with an AQL of 4.0, expressed in TABLE II. Examination of packaging Provided by IHSNot for ResaleNo reproducti
20、on or networking permitted without license from IHS-,-,-MIL-B-LI3Y3hC 79 777770b 4582b 2 MIL-B-43436G TABLE II. Examination of packeffing (contd) Exadna- Defect Workmanship . Inadequate application of components such as: incmplete closure of container flap, loose strapping, improper taping, inadequa
21、te stapling Bulged or distorted container Con tents Quantity per container more or less than required Weight of shipping container content exceeds 65 pounds 4.3 Tests. 4.3.1 Finish test. - The colored band marker shall be bent back upon itself The band marker shall then be examined 180. longitudinal
22、 axis of the band marker. to determine compliance with 3.5. finish shall constitute a defect. The bend shall be made between the thumb and forefinger across the Any cracking, crazing, or peeling of the * 5. PACKAGING * 5.1 Preservation-packaging. Preservation-packaging shall be level A or C as speci
23、fied (see 6.2) . * 5.1.1 Level A. One thousand band markers of one description only, shall be packaged in a snug-fitting folding, setup, or metal-stayed paperboard box conformbg to variety 1, style i1, type G, class i, or style IV, type V, class i of PPP-B-566; or type I, variety 1, clam A, style 3
24、or 4 of PPP-B-676; or class 1, style A of PPP-B-66S9 respectively. Closure shall be in accordance with the applicable box specification or appendix thereto. * 5.1.2 Level C. Band markers shall be packaged to afford adequate protection against damage during shipment from the supply source to the firs
25、t receiving activity. requirement. The contractor may use his standard practice when it meets this Packing shall be level A, B, or C as specified (see 6.2) * 5.2 Packira. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-9-4343bC 99 W 9999906 04
26、58269 4 MIL-B-43436C * 5.2.1 Level A packing. Band markers of one description only, preserved- packaged as specified in 5.1, shall be packed in a snug-fitting fiberboard shipping container conforming to style RSC, V2s of PPP-B-636. Each fiberboard shipping container shall be closed in accordance wit
27、h method III, waterproofed in accordance with method V, and reinforced in accordance with the appendix of PPP-8-636. The weight of contents shall not exceed 65 pounds. * 5.2.2 Level B packing, Band markers of one description only, preserved- qackaged as specified in 5.1, shall be packed in a snug-fi
28、tting fiberboard shippingcbntainer conforming to style RSC type CF, variety SW, or type SF, dass domestic of PPP-B-636. Closure shall be in accordance with method II of :he appendix of PPP-B-63E The weight of contents shall not exceed 65 pounds. ;fien specj.fied !see 6,2), the shipping container sha
29、ll be a grade VC, VS, or V4s fiberboard lox fabricated in accordance with PPP-B-636 and closed in 8ccordance.with method III as specified in the appendix of the container specification, 5.2.3 Level C packing. Band markers, preserved-packaged as specified in 5.i, shall be packed in a manner to insure
30、 carrier acceptance and safe delivery at destinatkon atthe lowest transportation rate for such supplies. Containers and packing. shall comply with Uniform Freight Classification or National Motor Freight Classification, as applicable, 5.3 Marking. In addition to any special marking required by the c
31、ontract .)c order, interior packages and shipping containers shall be marked in accordance with MIL-STI)-129. 6. NOTES 6,l Intended use. Band markers are for use in identifying pipes, hoses, wires, tube liners, cables, conduits and leads. Markers covered by MIL-B-+43436/2 are designed for use on cab
32、le with diameter range of 0.150 to 0.300 inch range, Markers covered by MIL-B-43436/3 are designed for use on cable with diameter range of 0.125 to 0,220 inch range. 6.2 Ordering data. Procurement documents should specify the following: (a) (b) Part number required (see specification sheet), (c) (d)
33、 Title, number, and date of this specification. Selection of the applicable levels of packaging and packing When V-board ahipping containers are requLzd for level B (see 5.1 and 5.2). shipment (see 5.2.2). 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IH
34、S-,-,-MIL-B-4343bC 77 I 7779706 0458270 O - . I MEL-B-43436C I 6.3 Classification comparison. MIL-B-43436B and MS 390206 have been incorporated in this revision as followa: MIGG43436B MIL-B-43436C Style 1 Style IA Styb iB Style 2 Style 3 MIL-B-43436/1 MIL-B-43436/3 MIL-B-43436/2 MIL-B-43436/4 MIL-B-
35、4343615 Part numbers : MS 39020 MIL-B-43436C MS 39020.- MIL-B-43436C 1 -21 M43436/1-11 -1 M43436/1-1 -u M43436/3-1 -23 M43436 /i-12 -lB M43436/2-1 -24 M43436/1-13 -2 M4343611-2 -26 M43436/1-14 -3 M4 34 36 /1-3 -2 7 . M43436/1-15 -4 M4343611-4. -28 M43436/4-1 -7 M43436/1-5 -29 M43436/4&2 -10 M43436/1
36、-6 -31 M4343615-1 -11 M4343611-7 -32 M4 34 36 1 5-2 -13 M4 34 36 11-8 -19 M4343611-9 -20 M4 34 36 / 1-10 6.4 Changes from the previous issue. The margins of thl8 specification are marked with au asterisk to indicate where changes (additions, modifications, corrections, deletions) from the previous i
37、ssue were made This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and re
38、lationship to the last previous issue. Cue todiane : Preparing activity: Am - L Navy - YD Air Force - 84 Review activitieo: Aring. - AT, AV User activitlen : Am - WC, ME Navy - MC, OS 7 Am - GL Project No. 9905-0232 fiIJ.9. GOVERNMENT PRINTING OFFICE: 1976-603-766/4203 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
