1、AMSC N/A FSC 5910 INCH-POUND MIL-C-25/6E 23 March 2013 SUPERSEDING MIL-C-25/6D 12 January 2004 MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, PAPER OR PLASTIC DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), STYLES CP67 AND CP69 This specification is approved for use by all Departme
2、nts and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification and MIL-C-25. REQUIREMENTS: Dimensions: See figure 1, table I, and table II. Case: Magnetic or nonmagnetic material, uninsulated. Design and construction: Ca
3、pacitors shall be of the design, construction and physical dimensions as specified in figure 1, table I, and table II. Capacitance value: See table I. Capacitance tolerance: See table I. DC voltage rating: See table I. Operating temperature range: -55C to +85C. Terminal: Symbol B, solder lug (nonrem
4、ovable). Voltage derating with temperature: See figure 2. Capacitance: When measured as specified in MIL-C-25, shall be within the tolerance specified in table I. Dissipation factor: When measured as specified in MIL-C-25, shall not exceed 1 percent. INACTIVE FOR NEW DESIGN after 21 June 1968 Provid
5、ed by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-25/6E 2 Circuit diagram: Vibration (grade 1, 10 to 55 Hz): As specified in MIL-C-25. Thermal shock: As specified in MIL-C-25, except that the test temperature of step 3 shall be 85C. Qualification inspe
6、ction: Qualification inspection is not required. A manufacturer that is currently listed on the QPL for at least one other MIL-C-25 style may supply the CP67 and CP69 parts by performing the group A testing. A manufacturer that is not qualified to any MIL-C-25 styles may produce these parts by perfo
7、rming the group A and group C testing on the product before delivery. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-25/6E 3 FIGURE 1. Styles CP67 and CP69 capacitors. Provided by IHSNot for ResaleNo reproduction or networking permitted withou
8、t license from IHS-,-,-MIL-C-25/6E 4 TABLE I. Styles CP67 and CP69 characteristics and dimensions. Type designation 1/ DC voltage rating (see fig. 2) (volts) Capacitance (F) Capaci- tance tolerance 2/ Charac- teristics Vibration grade Case size Characteristic E Characteristic F CP6-B-EF503K1 600 0.0
9、5 K E 1 B1 CP6-B-EF104K1 600 0.1 K E 1 B1 CP6-B-EF254K1 600 0.25 K E 1 B2 CP6-B-EF504K1 600 0.5 K E 1 B3 CP6-B-F105K1 600 1 K E, F 1 B5 B4 CP6-B-EG103K1 1,000 0.01 K E 1 B1 CP6-B-EG203K1 1,000 0.02 K E 1 B1 CP6-B-EG503K1 1,000 0.05 K E 1 B1 CP6-B-G104K1 1,000 0.1 K E, F 1 B2 B1 CP6-B-EG254K1 1,000 0
10、.25 K E 1 B3 CP6-B- -G504K1 1,000 0.5 K E, F 1 B5 B4 CP6-B-EF503V1 600 0.05-0.05 3/ V E 1 B1 CP6-B-EF104V1 600 0.1 -0.1 V E 1 B2 CP6-B-EF254V1 600 0.25-0.25 V E 1 B3 CP6-B-F504K1 600 0.5 -0.5 V E, F 1 B5 B4 CP6-B-EG103V1 1,000 0.01-0.01 V E 1 B1 CP6-B-EG203V1 1,000 0.02-0.02 V E 1 B1 CP6-B-G503V1 1,
11、000 0.05-0.05 V E, F 1 B2 B1 CP6-B-G104V1 1,000 0.1 -0.1 V E, F 1 B3 B2 CP6-B-G254V1 1,000 0.25-0.25 V E, F 1 B5 B4 CP6-B5-F503V1 600 0.05-0.05-0.05 V E, F 1 B2 B1 CP6-B5EFP04V1 600 0.1-0.1-0.1 V E 1 B2 CP6-B5-F254V1 600 0.25-0.25-0.25 V E, F 1 B5 B4 CP6-B5EG103V1 1,000 0.01-0.01-0.01 V E 1 B1 CP6-B
12、5EG203V1 1,000 0.02-0.02-0.02 V E 1 B1 CP6-B5EG503V1 1,000 0.05-0.05-0.05 V E 1 B2 CP6-B5EG104V1 1,000 0.1 -0.1 -0.1 V E 1 B4 1/ Complete type designation shall include additional symbols to complete style designation, indicate circuit (where applicable) and characteristics (where applicable). 2/ Ca
13、pacitance tolerance in percent: K, 10; V, +20, -10. 3/ For multiple-unit capacitors, the watt-second rating is the sum of the watt-second ratings of the component sections. TABLE II. Case dimensions. Case size Dimensions C .062 B1 1.062 B2 1.500 B3 2.000 B4 2.500 B5 2.750 TABLE III. Millimeter equiv
14、alent of decimal inches. Inches mm Inches mm Inches mm .005 .13 .640 16.26 1.750 44.45 .031 .79 .750 19.05 2.000 50.80 .094 2.39 1.062 26.99 2.125 53.98 .156 3.96 1.500 38.10 2.438 61.93 .531 13.49 1.687 42.85 2.500 63.50 Provided by IHSNot for ResaleNo reproduction or networking permitted without l
15、icense from IHS-,-,-MIL-C-25/6E 5 NOTE: Permissible operating voltages, while based on incomplete data are the capacitor suppliers best estimate to provide a life expectancy of 8,800 hours of continuous operation at higher ambient temperatures. Longer life can be expected by operation at voltages lo
16、wer than indicated on the curve: For example, a life expectancy of 44,000 hours may be obtained by operation at 70 percent of the voltage determined by use of this curve. Also, a life longer than 8,800 hours may be expected at the voltage determined by use of this curve if the high ambient temperatu
17、re prevails for only a portion of the whole operating time. FIGURE 2. Voltage derating for ambient temperature (characteristics E and F). Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where modifications from this revision were made. This w
18、as done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. Custodians: Preparing acti
19、vity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5910-2011-028) DLA - CC Review activities: Army - AR, MI Navy - AS, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
