1、MIL-C-36856 65 9999906 02b3008 9 MIL-C-36856 26 September 1972 MIL IT ARY SPEC IF ICATION CASE, MEDICAL INSTRUMENT AND SUPPLY SET, Nylon, Nonrigid, No. 3 This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 This specification covers an emp
2、ty case fabricated of nylon cloth. The case contains three compartments , each fitted with a slide fastener closure, and intended to hold an assortment of items of medical materiel. Each case is equipped with a detachable carrying strap. 2. APPLICABLE DOCUMENTS 2.1 The following specifications and s
3、tandards, of the issue in effect on date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein: SPECIFICATIONS Federal L-P- 39 4 V-F-106 V-T-285 FF-R-5 5 6 PPP-B-5 85 PPP-B-601 PPP-B-621 PPP-B-636 Plastic Molding Material, Polypropylene, Fas
4、tener, Slide, Interlocking. Thread , Polyes ter. Rivets, Solid, Small; Rivets, Split, Small; Injection and Extrusion. Rivets, Tubular, Small ; and Caps, Rivets , General Purpose. Box, ITood, Wirebound. Box, Wood, Cleated Plywood. Box, Wood, Nailed and Lock Corner. Box, Fiberboard. Military MIL-F-49
5、5 MIL-IJ-5 30 Webbing, Textile, Cotton, General Purpose, Finish, Chemical, Black, for Copper Alloys. Natural or in Colors. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-(2-36856 SPECIFICATIONS Mi lit ary XIL-B-543 MIL-R-3390 MIL-L-3851 MIL-W-4
6、088 MIL-T-5038 MIL-H-9890 MIL-F-10884 MIL-L-11075 MIL-W- 2 7 2 65 MIL-C-43128 STANDARDS Federal FED- S TD- 15 1 FED- STD- 75 1 Military MIL-STD-105 MIL- STD- 12 9 Buckle, Tongueless and Web Strap. Ring, Dee. Loops, Slide (For Equipage). Webbing, Textile, Woven Nylon. Tape, Textile and Webbing, Texti
7、le, Rein- Hardware, Individual Load Carrying Equipment; Fast eners , Snap. Loop, Strap Fastener. Webbing, Textile, Woven Nylon, Impregnated. Cloth, Plain Weave, Nylon, Water Repellent, Snap Hook, Wire Body, Fixed Loop Eye, Flat Spring forcing, Nylon. and Hardware, Miscellaneous. OG-106. Closure, wit
8、h Retainer. Metal ,Test Methods. Stitch, Seam and Stitching. Sampling Procedures and Tables for Inspection Xarking for Shipment and Storage. by Attributes. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-3b56 65 9999906 0263010 7 MIL-C-36856
9、STANDARDS Military MS-519 36 gasher , Flat (Burr). c DRATJING DEFENSE PERSONNEL SUPPORT CENTER 20774 Case, Medical Instrument and Supply Set, Nylon, Nonrigid, No. 3. Copies of specifications, standards, and drawing required by suppliers in connection with specific procurement functions should be ob-
10、 tained from the procuring activity or as directed by the contracting officer.) 2.2 Other publications. The following -documents form a part of this specification to the extent specified herein. Unless otherwise indicated, the issue in effect on date of invitation for bids or request for proposals s
11、hall apply THE COLOR ASSOCIATION OF THE UNITED STATES, INC. United States Army Color Card of Standard Shades for Slide Fastener Tapes. Department of Defense Standard Color Card of Official Standardized Shades for Sewing Threads 1968 (Application for copies of each should be addressed to the Color As
12、sociation of the United States, Inc., 200 Madison Avenue, New York, N. Y. 10016). 3. REQUIREMENTS 3.1 Component parts. The case shall consist of two small compartments, one large compartment, a pocket, a hood, a closing strap complete with buckle and quick release device, and a detachable carrying s
13、trap. The carrying strap shall be fitted with snaphooks, a strap loop and a slide loop. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-36856 3.2 Materials. Except where otherwise specified, materials shall con- form to the applicable portion
14、s of the specifications, standards, and drawing specified herein, and as described in 3.3 and shall be capable of meeting the requirements specified therein. In addition, the metals shall conform to the chemical requirements of their applicable specifications when tested as specified in section 4. W
15、hen materials to be used are not specifically designated, those used shall be of the highest commercial quality, and entirely suitable for the purpose intended. 3.2.1 Cloth, nylon. The nylon cloth shall be olive green No. 106, water repellent, conforming to MIL-C-43128. 3.2.2 Webbing. 3.2.2.1 Webbin
16、g, nylon. The 3/4-inch nylon webbing shall conform to type Ia of MIL-W-4088. 4088. The 1-inch nylon webbing shall conform to type II of MIL-W- 3.2.2.1.1 Color and finish. The nylon webbing shall be dyed olive drab number 7 to match the standard shade, and shall be resin impregnated conforming to cla
17、ss R of MIL-W-27265. The resin impregnated webbing shall conform to the applicable requirements of MIL-W-27265. 3.2.2.2 Webbing, cotton. The 2-inch wide cotton webbing for the carrying strap shall conform to the requirements of MIL-W-530, type II, class 4, and shall be vat dyed olive drab No. 7. 3.2
18、.3 Tape, nylon, The nylon binding tape shall be OG-106 conroming to type III, 314-inch of MIL-T-5038. 3.2.4 Thread polyester. The thread for all stitching shall conform to type I, class I, sub-class B, Size F, of V-T-285. The thread shall be dyed olive drab shade S-1, C.I. 66022, except the colorfas
19、tness requirements and test methods shall be limited to weathering only. 3.2.5 Polypropylene. The stiffener for the quick release strap shall be made from sheet stock virgin polypropylene material of natural color meeting require- ments of type I of L-P-394. The sheet stock shall be 0.040 i 0.005 in
20、ch thick. The plastic stiffener pieces fabricated from the sheet stock shall be produced in such a manner that the long edges of the pieces shall have been parallel with the direction of extrusion (the long edges) of the roll of material from which they are fabricated. The finished pieces shall be u
21、niform in color, texture, and finish and the edges shall be smooth and free from cracks and sharp corners. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-36856 65 W 7779706 0263012 O MIL-C-36856 3.2.6 Buckle, nonslip. me-34-inh buckle shall
22、conform to type V, class 3 of NIL-B-543. 3.2.7 “D“ rings. The ID“ (DEE) rings shall be symbol A, class 1, 25/32 inch by 3/8 inch, black chemical finish, of MIL-R-3390. 3.2.8 Fastener, loop. The fastener loop used for the quick release device shall be type III of MIL-H-9890. 3.2.9 Fasteners, snap. Th
23、e snap fastener on the quick release assembly shall be style 2A, finish 2, black, of MIL-F-10884. 3.2.10 Rivets. The rivets on the fastener loop shall be type XII, tu- bular, class 3, oval head, grade F, brass 9/64-inch nominal size, conforming to FF-R-556. The rivets shall be given a black chemical
24、 finish. The length shall be such as to effect a secure clinch. 3.2.11 Burrs. The burrs on the fastener loop shall be brass, size No. 9, O Es-51936. 3.2.12 Fasteners, slide. Except as specified herein, the slide fasteners shall conform to V-F-106, type I, style 18, size M, two slider, with short tab
25、 pulls fitted with webbing thongs. The metal parts shall be brass with a black chemical finish conforming to MIL-F-495. 3.2.12.1 Tape, The slide fastener tapes shall be vat dyed olive drab shade S, conforming to U.S. Army Color Card of Standard Shades for Slide Fastener Tapes, and shall be water rep
26、ellent and mildew resistant, in accordance with V-F-106. only. Mildew resistance shall be obtained by using copper-8-quinolinolate 3.2.12.1.1 Water repellence. resistance as specified in V-F-106. The finished tape shall be tested for water 3.2.12.2 Salt spray resistance. The slide fasteners shall me
27、et the salt spray resistance requirements specified in V-F-106. 3.2.12.3 Webbing for thongs. Webbing for thongs shall conform to the requirements of V-F-106 for thongs (cotton webbing) except that mildew resistance shall be obtained by using copper-8-quinolinolate only, and the finished 1engt.h of t
28、he thong after assembly to the pull shall be 3-1/2 + 1/2 inch. - 3.2.13 Loops, slide. Slide loops shall conform to MIL-L-3851 .and khall be class 1, style 2, 2 inches. 5 /- . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-36856 3.2.14 Loops, s
29、trap. Strap loops shall conform to MIL-L-11075 and shall be type I, brass, style E, 2-1/16 by 114 inch, wire. 3.2.15 Snaphooks. Lines 1 and 2, delete: MIL-S-2578 for type I, class I“- and subs tit ut e : “MIL-S-437 701 1, : Material 1. 3.3 Construction. The construction of the case (including detach
30、able carrying strap) shall conform to the requirements specified herein and to those shown on Defense Personnel Support Center Drawing 20774. 3.3.1 Stitching, machine. All stitching shall conform to FED- cm1751 as follows: For all stitching except overed.ge stitching; type 301, 8 to 10 stitches per
31、inch. For overedge stitching (single operation optional) ; type 503 or 504, 8 to 10 stitches per inch. For closing seams and overedge stitching (simultaneous operation optional); type 301 in combination with 503, 504 or 502, 8 to 10 stitches per inch. All edges of closing seams shall be overstitched
32、. rication of the thread by any means, prior to or during sewing. Any of the operations requiring box, box with cross stitch, iJ stitching, straight line tacking or any other design of stitching cited in this specification may be performed with an automatic stitching machine provided the requirement
33、s for stitch pattern, stitches per inch, size, and types, of thread are met; and at least three or more tying, overlapping, or back stitches are used to secure the ends of stitching. There shall be no lub- 3.3.1.1 Type 301 stitching. Thread breaks in stitching shall be over- stitched not less than 1
34、 inch at each break. Stitching shall be backstitched not less than 1 inch at the ends, except where ends are turned under in a hem or held down by other stitching. Thread tension shall be maintained so that there will be no loose stitching, and the lock will be imbedded in the materials sewed. 6 . i
35、. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-3b56 65 7797906 02630LLt Lt MIL-C-36 856 3.3.1.2 Overedge stitching. Thread breaks in overedge stitching shall be overstitched not less than 3f4 inch at each break. Thread tension shall be maint
36、ained so that there will be no loose stitching. 3.3.2 Setting of snap fasteners. The hole punched before insertion of the male or female part of the fastener shall be smaller than the outside diameter of the fastener tube so that the tube shall be forced through the hole. The fasteners shall be secu
37、rely clinched. 3.3.3 Setting of rivets. All holes in fabric shall be pre-punched before in- ser.tion of the rivets. When installed, the clinched end of the rivet shall be reasonably free of cracks or burrs, and shall have a uniform roll that will effect a secure hold. 3.3.4 Fusing of nylon webbing.
38、All ends of nylon webbing shall be fused after cutting, including bias cuts. 3.4 Marking for identification. Each case (including carrying strap) shall be legibly and permanently marked with black waterproof ink or paint in accordance with the drawing 3.5 Uorkmanship. Workmanship shall be first clas
39、s throughout. Complete cases (including carrying straps) shall be well made and free from defects which detract from their appearance or may impair their serviceability. 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection. Unless otherwise specified in the con- tract or purchase order,
40、 the supplier is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or order, the supplier may use his otm or any other facilities suitable for the performance of the inspection requirements specified herein, unless disap
41、proved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such in- spections are deemed necessary to assure supplies and services conform to pre- scribed requirements. 4.1.1 Records. Records of examinations and tests performed
42、by or for the contractor shall be maintained by the contractor and made available to the Govern- ment, upon the Governments request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
43、7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C- 36 856 4.1.2 Inspection. Inspection, as used in this specification, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or
44、procedures) and testing (determination by technical means of physical and chemical properties) of the item. 4.1.3 Certificates of quality. Certificates of quality, supplied by the manufacturer of the cloth, fasteners, hardware, tape, and webbing, may be fur- nished in lieu of actual p;rformance of s
45、uch testing by the contractor, provided lot identity has been maintained and can be demonstrated to the Government. The certificate shall include the name of the contractor, the contract number, the nam.e of the manufacturer or supplier, the FSN, the item identification, the name OE the component/ma
46、terial, the lot number, the lot size, the sample size, the date .Of testing, the test method, individual test results, and the specification requirement c , 4.2 Quality conformance inspection. The examinations and tests required to assure conformance of those items or lots of items to be offered for
47、 acceptance are classified as specified in tables I and II (see 4.2.1 and 4.2.2) and 4.2.3. 4.2.1 Sampling for examination. 4.2.1.1 Sampling for visual defects. Sampling for visual defects shall be conducted in accordance with MIL-STD-105. The inspection levels and acceptable quality levels shall be
48、 as indicated in table I. Unit of product for examination purposes shall be one case. Table I. Sampling for Visual Defects Inspection AQL (defects per 1 eve 1 i00 units) Ma j or II 2.5 Total (Major and Minor combined) II 6.5 , 4.2.1.2 Examination for dimensional defects. During this examination, any
49、 measurement deviating from the dimensions and tolerances of the finished case specified in the drawing shall be scored as a size measurement defect. The sample unit for this examination shall be one completely fabricated case. The lot size shall be expressed“in units of one case. selected in accordance with inspection level S-3 of MIL-STD-105. quality level shall be 4.0 (one class) defects per 100 units. The sample size shall be The a
