1、 AMSC N/A FSC 5930 INCH-POUND MIL-DTL-12211/1 23 April 2008 DETAIL SPECIFICATION SHEET SWITCH, PRESSURE, SPST, WATERPROOF This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consi
2、st of this specification sheet and MIL-DTL-12211. FIGURE 1. Dimensions and configuration .2-13486/1-3 CABLE SPE MIL-DTL-13486/1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-12211/1 2 REQUIREMENTS: Dimensions and configurations: See figure 1
3、 Set Point Range: 2 120 PSI (.14 8.3 Bar) Set Point Tolerance: 1 PSI or 5% (.07 Bar) Maximum Operating Pressure: 250 PSI (17 Bar) Proof Pressure: 750 PSI (51 Bar) Differential: 8 16% Current Rating: 5 A 250 VAC 5 A 30 VDC (Resistive) Media Connection: See Table I Cycle Life: 1 Million Circuit Form:
4、 See Table II Part or Identifying Numbers (PIN): PINs are assigned as follows: M12211/1 - 1 B # # # F TABLE I. Media Connection Designation Media Connection 1 1/4“ NPT Male 2 1/8“ NPT Male 6 7/16“ SAE O-Ring (-4) 14 1/2“ NPT Male- 1/8“ NPT Female 17 1/4“ BSPP Male (G1/4) 28 1/8“ BSPP Male (G1/8) Med
5、ia Connection (see table I) 1/4“ NPT MaleCircuit Form (see table II) Fixed Set Point 2-120 PSI Set Point Direction R = RisingProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-12211/1 3 TABLE II. Circuit Form Designation Circuit Form A SPST-NO B
6、 SPST-NC C SPDT Referenced documents: MIL-DTL-12211 MIL-DTL-13486/1 Custodians: Preparing activity: Navy - EC DLA - CC DLA - CC (Project 5930-2008-041) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
