1、INCH-POUND MIL-DTL-13791/10 15 January 2009 DETAIL SPECIFICATION SHEET INSERT, SCREW THREAD This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and M
2、IL-DTL-13791. A Thd size B Outside dia C Length MIN Material thick E Drill size D Hole depth Inch mm Inch mm Inch mm Inch mm Inch mm 1/4 -20 NC .458 11.63 .562 14.27 .750 19.05 .438 11.12 .562 14.275/16-18 NC .520 13.21 .562 14.27 .750 19.05 .500 12.70 .562 14.273/16-18 NC .520 13.21 .750 19.05 .750
3、 19.05 .500 12.70 .562 14.2710-32 NF .395 10.03 .357 9.07 .500 12.70 .357 9.07 .375 9.0712-24 NC .395 10.03 .500 12.70 .625 15.87 .357 9.07 .500 12.70NOTES: 1. Dimensions are in inches. 2. Metric equivalents are for information only. FIGURE 1. Insert screw thread. AMSC N/A FSC 2920 Provided by IHSNo
4、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/10 2Dimensions and configurations: See figure 1. Referenced document. This document references MIL-DTL-13791. CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - SH DLA - CC (Proj
5、ect 2920-2008-011) Review activities: Army - CR, CR4 Navy - MC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
