1、INCH-POUND MIL-DTL-13791/16 15 January 2009 DETAIL SPECIFICATION SHEET SPARKING GAP This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-1
2、3791. FIGURE 1. Sparking gap. AMSC N/A FSC 2920 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/16 2Inches mm Inches mm .016 0.41 1.000 25.40.070 1.78 2.000 50.80.250 6.35 2.500 63.50NOTES: 1. Dimensions are in inches. 2. Metric equival
3、ents are for information only. FIGURE 1. Sparking gap - Continued. Dimensions and configurations: See figure 1. Referenced document. This document references MIL-DTL-13791. CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - SH DLA - CC (Project 2920-2008-017) Review activi
4、ties: Army - CR, CR4 Navy - MC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
