1、INCH-POUND MIL-DTL-13791/21 15 January 2009 DETAIL SPECIFICATION SHEET RETAINER BEARING This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-D
2、TL-13791. FIGURE 1. Retainer bearing AMSC N/A FSC 2920 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/21 2Inches mm Inches mm .025 0.64 1.370 34.80.750 19.05 2.625 66.681.125 28.56 3.875 98.43NOTES: 1. Dimensions are in inches. 2. Metr
3、ic equivalents are for information only. FIGURE 1. Retainer bearing - Continued. Dimensions and configurations: See figure 1. Referenced document. This document references MIL-DTL-13791. CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - SH DLA - CC (Project 2920-2008-021)
4、 Review activities: Army - CR, CR4 Navy - MC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
