1、 AMSC N/A FSC 5985 MIL-DTL-15370/6E 7 May 2008 SUPERSEDING MIL-DTL-15370/6D 20 June 2003 DETAIL SPECIFICATION SHEET COUPLERS, DIRECTIONAL (WAVEGUIDE, COAXIAL OUTPUT) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring th
2、e couplers described herein shall consist of this specification sheet and MIL-DTL-15370. Inches mm .605 15.37 .645 16.38 .94 23.9 3.688 93.68 3.813 96.85 4.938 120.35 5.063 128.60 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. FIGURE 1. Dimensions and confi
3、guration for part number M15370/6-001. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/6E 2 Inches mm .169 4.29 .171 4.34 .460 11.68 .92 23.4 1.02 25.9 1.605 40.77 1.645 41.78 NOTES: 1. Dimensions are in inches. 2. Metric equ
4、ivalents are given for information only. FIGURE 2. Dimensions and configuration for part number M15370/6-002. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/6E 3 Inches mm .29 7.4 .35 8.9 .515 13.08 .97 24.6 1.00 25.4 1.03 26.2 1.50 38
5、.1 3.38 85.9 4.62 117.3 4.74 120.4 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. FIGURE 3. Dimensions and configuration for part number M15370/6-003. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I.
6、 Electrical characteristics. Coupling (dB) VSWR (max) Flanges per MIL-DTL-3922 Dash number Frequency range GHz Nominal Tolerance Coupling variation (dB) max Effective directivity (dB) min Primary line Secondary line Power dissipation of internal load (avg) Watts Input Output Connector: Female to mat
7、e with male conforming in and to MIL-PRF-39012 001N S 8.5-9.6 20 1.0 0.5 15 1.20:1 1.30:1 1 M3922/53 -003 M3922/59 -008 Series N 002N S 8.2-12.4 40 1.0 0.4 20 1.10:1 2.0:1 .125 M3922/53 -003 M3922/53 -003 SMA type 003N S 9.0-9.2 40 1.0 0.5 15 1.05:1 1.15:1 .5 M3922/59 -008 M3922/53 -003 SMA type 4 M
8、IL-DTL-15370/6E Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/6E 5 REQUIREMENTS: Design, construction and physical dimensions: See figures 1 through 3 and table I. Electrical: See table I. Connectors: See table I. Flanges: See table I
9、I. Temperature range: Operating: -65C to +95C for dash numbers 001 and 002. -29C to +70C for dash numbers 003. Non-operating: -65C to +95C for dash numbers 001 and 002. -65C to +71C for dash number 003. Shock: Not applicable. Marking: See figures 1 through 3. Part number: M15370/6- (and a dash numbe
10、r from table I). Cross-reference data: P/N M15370/6-002: Type CG-176/AP. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/6E 6 Referenced Documents: In addition to MIL-DTL-15370, this document references the following: MIL-DTL-3922 MIL-P
11、RF-39012 Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 11 DLA - CC Review activities: (Project 5985-2008-030) Army - MI Navy - AS, CG,
12、MC, OS, SH Air Force - 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
