1、AMSC N/A FSC 5985 MIL-DTL-15370/9H 22 October 2012 SUPERSEDING MIL-DTL-15370/9G 7 May 2008 DETAIL SPECIFICATION SHEET COUPLERS, DIRECTIONAL (COAXIAL, SMA CONNECTORS) (1 TO 26.5 GHz) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements
2、for acquiring the couplers described herein shall consist of this specification sheet and MIL-DTL-15370. Inches mm .002 0.05 .004 0.10 .104 2.64 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. FIGURE 1. Dimensions and configuration for part number M15370/9-0
3、01 through M15370/9-008, M15370/9-029 through M15370/9-031, M15370/9-035 through M15370/9-038, M15370/9-042 and M15370/9-047 through M15370/9-049. INCH-POUND .104 +.004 -.002 DIA THRU 2 PLACES Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-1
4、5370/9H 2 Inches mm .002 0.05 .004 0.10 .104 2.64 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. FIGURE 2. Dimensions and configuration for part number M15370/9-009 through M15370/9-014, M15370/9-017, M15370/9-018, M15370/9-022 through M15370/9-025, M15370/
5、9-027, M15370/9-028, M15370/9-043, M15370/9-045 and M15370/9-046. .104 +.004 -.002 DIA THRU 2 PLACES Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/9H 3 Inches mm .002 0.05 .004 0.10 .125 3.18 NOTES: 1. Dimensions are in inches. 2. Met
6、ric equivalents are given for information only. FIGURE 3. Dimensions and configuration for part number M15370/9-015 and M15370/9-016. .125 +.004 -.002 DIA THRU 2 PLACES Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/9H 4 Inches mm .010
7、 0.25 .140 3.56 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. FIGURE 4. Dimensions and configuration for part numbers M15370/9-019 through M15370/9-021, M15370/9-032 through M15370/9-034 and M15370/9-044. .140 +.010 -.000 DIA THRU 2 HOLES Provided by IHSNo
8、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/9H 5 Inches mm .112 2.84 .12 3.05 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. FIGURE 5. Dimensions and configuration for part numbers M15370/9-026. .112 -40 UN
9、C 2B .12 DEEP 2 HOLES BOTH SIDES Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/9H 6 Inches mm .094 2.38 .114 2.90 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. FIGURE 6. Dimensions and confi
10、guration for part numbers M15370/9-039. .114 .094 DIA THRU 2 PLACES Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/9H 7 Inches mm .002 0.05 .004 0.10 .104 2.64 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for inf
11、ormation only. FIGURE 7. Dimensions and configuration for part numbers M15370/9-040 and M15370/9-041. .104 +.004 -.002 DIA THRU Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/9H 8 REQUIREMENTS: Design, construction, and physical dimens
12、ions: See figures 1 through 7 and table I. Coaxial contact captivation: The center contact of each coaxial connector shall be captured in a method that will resist an axial force, in either direction, of 13 pounds maximum and a rotational torque of 4 ounce-inches maximum without loosening of parts o
13、r other damage and the center contact shall meet the dimensional interface requirements as specified in MIL-PRF-39012 for SMA connectors. Operating temperature range: -54C to +85C for dash numbers 032 through 034, 039 through 041, and 044. -54C to +95C for dash number 035. -54C to +105C for dash num
14、bers 001 through 031, 036, 038, 042, 045, 046, 049, and 051. -55C to +125C for dash number 050. Weight: See table I. Electrical: See table II. Marking: Part number shall be located as shown on figures 1 through 7. Part number: M15370/9- (and a dash number from table I). Provided by IHSNot for Resale
15、No reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/9H TABLE I. Dimensions and physical requirements. Dash number Mounting configuration (figure) Dimensions 1/ 2/ 3/ Weight (max) MIL-STD-202 method 213 (Shock) A Max B 4/ .02 (0.5) C 5/ .010 (0.25) D 4/ .02 (0.5) E 4/ .
16、02 (0.5) F Max G Max H Max K Max L Max M Max N 5/ .010 (0.25) P Max lbs. g oz 001 1 1.83 (46.5) 1.28 (32.5) .94 (23.9) .25 (6.4) .42 (10.7) .39 (9.9) .47 (11.9) .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .05 23 0.8 N/A 002 1 1.83 (46.5) 1.28 (32.5) .94 (23.9) .25 (6.4) .42 (10.7) .39 (9.9
17、) .47 (11.9) .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .05 23 0.8 N/A 003 1 1.83 (46.5) 1.28 (32.5) .94 (23.9) .25 (6.4) .42 (10.7) .39 (9.9) .47 (11.9) .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .05 23 0.8 N/A 004 1 1.83 (46.5) 1.28 (32.5) .94 (23.9) .25 (6.4) .42 (10.7) .39
18、(9.9) .47 (11.9) .35 (8.9) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .05 23 0.8 N/A 005 1 1.20 (30.5) .65 (16.5) .34 (8.6) .25 (6.4) .42 (10.7) .39 (9.9) .47 (11.9) .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .04 17 0.6 N/A 006 1 1.20 (30.5) .65 (16.5) .34 (8.6) .25 (6.4) .42 (10.7) .39
19、(9.9) .47 (11.9) .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .04 17 0.6 N/A 007 1 1.20 (30.5) .65 (16.5) .34 (8.6) .25 (6.4) .42 (10.7) .39 (9.9) .47 (11.9) .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .04 17 0.6 N/A 008 1 1.20 (30.5) .65 (16.5) .34 (8.6) .25 (6.4) .42 (10.7) .39
20、(9.9) .47 (11.9) .35 (8.9) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .04 17 0.6 N/A 009 2 1.04 (26.4) .50 (12.7) - .25 (6.4) .50 (12.7) .39 (9.9) .75 (19.0) .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .04 17 0.6 N/A 010 2 1.04 (26.4) .50 (12.7) - .25 (6.4) .50 (12.7) .39 (9.9) .75 (19.0)
21、 .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .04 17 0.6 N/A 011 2 1.04 (26.4) .50 (12.7) - .25 (6.4) .50 (12.7) .39 (9.9) .75 (19.0) .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .04 17 0.6 N/A 012 2 1.04 (26.4) .50 (12.7) - .25 (6.4) .50 (12.7) .39 (9.9) .75 (19.0) .30 (7.6) .40 (
22、10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .04 20 0.7 N/A 013 2 1.04 (26.4) .50 (12.7) - .25 (6.4) .50 (12.7) .39 (9.9) .75 (19.0) .29 (7.4) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .04 20 0.7 N/A 014 2 1.04 (26.4) .50 (12.7) - .25 (6.4) .50 (12.7) .39 (9.9) .75 (19.0) .30 (7.6) .40 (10.2) .20 (5.1)
23、.54 (13.7) - .11 (2.8) .04 20 0.7 N/A 015 3 1.27 (32.3) .81 (20.6) .21 (5.3) .27 (6.9) .40 (10.2) .39 (9.9) .75 (19.0) .27 (6.9) .53 (13.5) .26 (6.6) .83 (21.1) .59 (15.0) .14 (3.6) .07 34 1.2 N/A 016 3 1.27 (32.3) .81 (20.6) .21 (5.3) .27 (6.9) .40 (10.2) .39 (9.9) .75 (19.0) .27 (6.9) .53 (13.5) .
24、26 (6.6) .83 (21.1) .59 (15.0) .14 (3.6) .07 34 1.2 N/A 017 2 1.04 (26.4) .50 (12.7) - .25 (6.4) .50 (12.7) .39 (9.9) .812 (20.6) .43 (10.9) .415 (10.54) .207 (5.26) .66 (16.8) - .11 (2.8) .07 34 1.2 N/A 018 2 1.04 (26.4) .50 (12.7) - .25 (6.4) .50 (12.7) .39 (9.9) .75 (19.0) .43 (10.9) .40 (10.2) .
25、20 (5.1) .66 (16.8) .11 (2.8) .11 (2.8) .05 24 0.8 N/A See footnotes at end of table. 9MIL-DTL-15370/9HProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/9H TABLE I. Dimensions and physical requirements - Continued. Dash number Mounting co
26、nfiguration (figure) Dimensions 1/ 2/ 3/ Weight (max) MIL-STD-202 method 213 (Shock) A Max B 4/ .02 (0.5) C 5/ .010 (0.25) D 4/ .02 (0.5) E 4/ .02 (0.5) F Max G Max H Max K Max L Max M Max N 5/ .010 (0.25) P Max lbs. g oz 019 4 2.00 6/ (50.8) - 1.750 7/ (44.45) .28 7/ (7.1) .12 7/ (3.0) .31 8/ (7.9)
27、 - .28 6/ (7.1) .44 6/ (11.2) - 1.25 6/ (31.8) - .62 6/ (15.7) .11 51 1.8 N/A 020 4 2.00 6/ (50.8) - 1.750 7/ (44.45) .28 7/ (7.1) .12 7/ (3.0) .31 8/ (7.9) - .28 6/ (7.1) .44 6/ (11.2) - 1.25 6/ (31.8) - .62 6/ (15.7) .11 51 1.8 N/A 021 4 2.00 6/ (50.8) - 1.750 7/ (44.45) .28 7/ (7.1) .12 7/ (3.0)
28、.31 8/ (7.9) - .28 6/ (7.1) .44 6/ (11.2) - 1.25 6/ (31.8) - .62 6/ (15.7) .11 51 1.8 N/A 022 2 1.04 (26.4) .50 (12.7) - .25 (6.4) .50 (12.7) .39 (9.9) .75 (19.0) .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) 16 .57 N/A 023 2 1.04 (26.4) .50 (12.7) - .25 (6.4) .50 (12.7) .39 (9.9) .75 (19.0)
29、 .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) 16 .57 J 9/ 024 2 1.04 (26.4) .50 (12.7) - .25 (6.4) .50 (12.7) .39 (9.9) .75 (19.0) .30 (7.6) .40 (10.2) .20 (5.1) .66 (16.8) - .11 (2.8) 16 .57 J 9/ 025 2 1.04 (26.4) .50 (12.7) - .25 (6.4) .50 (12.7) .39 (9.9) .75 (19.0) .43 (10.9) .40 (10.2)
30、 .20 (5.1) .66 (16.8) - .11 (2.8) 20 .70 N/A 026 5 3.50 (88.9) 3.00 (76.2) 2.00 (50.8) .27 (6.9) .75 (19.0) .39 (9.9) .89 (22.6) .45 (11.4) .53 (13.5) .27 (6.9) .75 (19.0) - .37 (9.4) 65 2.3 J 9/ 027 2 1.16 (29.4) .66 (16.8) - .25 (6.4) .58 (14.7) .39 (9.9) .25 (6.4) .30 (7.6) .40 (10.2) .20 (5.1) .
31、66 (16.8) - .11 (2.8) 20 .70 N/A 028 2 1.80 (45.7) 1.28 (32.5) - .25 (6.4) .90 (22.9) .39 (9.9) .25 (6.4) .30 (7.6) .40 (10.1) .20 (5.1) .66 (16.8) - .11 (2.8) 25 .90 N/A 029 1 1.83 (46.5) 1.28 (32.5) .94 (23.9) .25 (6.4) .42 (10.7) .39 (9.9) .47 (11.9) .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .1
32、1 (2.8) .05 23 0.8 N/A 030 1 1.83 (46.5) 1.28 (32.5) .94 (23.9) .25 (6.4) .42 (10.7) .39 (9.9) .47 (11.9) .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) .05 23 0.8 N/A 031 1 1.83 (46.5) 1.28 (32.5) .94 (23.9) .25 (6.4) .42 (10.7) .39 (9.9) .47 (11.9) .35 (8.9) .40 (10.2) .20 (5.1) .59 (14.99)
33、 - .11 (2.8) .05 23 0.8 N/A 032 4 2.40 (61.0) - 2.15 (54.6) .50 (12.7) .12 (3.0) .39 (9.9) - .28 (7.1) .42 (10.7) .21 (5.3) 1.25 (31.8) - .62 (15.7) 50 1.75 N/A 033 4 2.0 (50.8) - 1.75 (44.5) .28 (7.2) .12 (3.0) .39 (9.9) - .28 (7.1) .42 (10.7) .21 (5.4) 1.25 (31.8) - .62 (15.7) 42 1.50 N/A 034 4 2.
34、40 (61.0) - 2.15 (54.6) .50 (12.7) .12 (3.0) .39 (9.9) - .28 (7.1) .42 (10.7) .21 (5.4) 1.25 (31.8) - .62 (15.7) 50 1.75 N/A 035 1 1.80 (45.7) 1.28 (32.5) .94 (23.9) .25 (6.4) .42 (10.7) .39 (9.9) .47 (11.9) .35 (8.9) .40 (10.2) .20 (5.1) .56 (14.2) - .11 (2.8) .05 23 0.8 N/A 036 1 1.83 (46.5) 1.28
35、(32.5) .875 (22.23) .27 (6.9) .47 (11.9) .39 (9.9) .81 (20.6) .35 (8.9) .40 (10.2) .20 (5.1) .67 (17.0) - .16 (4.1) 1 N/A See footnotes at end of table. MIL-DTL-15370/9H10Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/9H TABLE I. Dimen
36、sions and physical requirements - Continued. Dash number Mounting configuration (figure) Dimensions 1/ 2/ 3/ Weight (max) MIL-STD-202 method 213 (Shock) A Max B 4/ .02 (0.5) C 5/ .010 (0.25) D 4/ .02 (0.5) E 4/ .02 (0.5) F Max G Max H Max K Max L Max M Max N 5/ .010 (0.25) P Max lbs. g oz 037 1 1.79
37、 (45.5) 1.27 (32.3) .875 (22.23) .26 (6.6) .450 (11.4) .39 (9.9) .75 (19.0) .32 (8.1) .42 (10.7) .21 (5.3) .625 (15.9) - .145 (3.6) .07 34 1.2 N/A 038 1 1.62 (41.1) 1.08 (27.4) .875 (22.23) .27 (6.9) .36 (9.1) .39 (9.9) .64 (16.3) .38 (9.7) .50 (12.7) .24 (6.1) .69 (17.5) - .11 (2.8) .07 34 1.2 N/A
38、039 5 1.46 (37.1) - .344 (8.7) .375 (9.53) .533 (13.5) .500 (12.7) .38 (9.7) .40 (10.2) .41 (10.4) .24 (6.1) .625 (15.9) - .11 (2.8) - - 1.5 K 10/ 040 7 1.03 (26.2) - - .25 (6.4) .533 (13.5) .39 (9.9) - .32 (8.1) .40 (10.2) .20 (5.1) .500 (12.70) - .11 (2.8) - 28 1 N/A 041 7 1.03 (26.2) - - .25 (6.4
39、) .533 (13.5) .39 (9.9) - .32 (8.1) .40 (10.2) .20 (5.1) .500 (12.70) - .11 (2.8) - 28 1 N/A 042 1 3.24 (82.3) 2.72 (69.1) 1.00 (25.4) .27 (6.9) 1.12 (28.4) .39 (9.9) .81 (20.6) .48 (12.2) .56 (14.2) .28 (7.1) .88 (22.4) - .17 (4.3) - 77 2.7 N/A 043 1 3.48 (88.4) 2.94 (74.7) 2.32 (58.9) .27 (6.9) .5
40、8 (14.7) .39 (9.9) .81 (20.6) .44 (11.2) .53 (13.5) .26 (6.6) .73 (18.5) - .11 (2.8) - 77 2.7 N/A 044 4 2.00 (50.8) - 1.75 (44.5) .28 (7.1) .12 (3.0) .39 (9.9) - .30 (7.6) .42 (10.7) .21 (5.3) 1.25 (31.8) - .62 (15.7) - 42 1.5 N/A 045 2 1.00 (25.4) .50 (12.7) - .26 (6.6) .50 (12.7) .39 (9.9) .64 (16
41、.3) .30 (7.6) .40 (10.2) .20 (5.1) .54 (13.7) - .11 (2.8) - 50 1.75 N/A 046 2 1.25 (31.8) .77 (19.6) - .26 (6.6) .63 (16.0) .39 (9.9) .40 (10.2) .45 (11.4) .38 (9.7) .19 (4.8) .75 (19.0) - .11 (2.8) - 50 1.75 N/A 047 1 1.40 (35.6) .86 (21.8) .500 (12.70) .26 (6.6) .45 (11.4) .39 (9.9) .81 (20.6) .39
42、 (9.9) .42 (10.7) .21 (5.3) .66 (16.8) - .11 (2.8) .07 34 1.2 N/A 048 1 1.40 (35.6) .86 (21.8) .500 (12.70) .26 (6.6) .45 (11.4) .39 (9.9) .81 (20.6) .39 (9.9) .42 (10.7) .21 (5.3) .66 (16.8) - .11 (2.8) .07 34 1.2 N/A 049 1 2.08 (52.8) 1.57 (39.9) .96 (24.4) .25 (6.4) .56 (14.2) .39 (9.9) .47 (11.9
43、) .41 (10.4) .53 (13.5) .26 (6.6) .69 (17.5) - .35 (8.9) .07 34 1.2 N/A 050 1 2.160 (54.86) 1.625 max (41.28) 1.125 max (28.58) .25 (6.4) .52 max (13.2) .39 (9.9) .64 (16.3) .50 (12.7) .54 (13.7) .27 (6.9) .89 (22.6) - .45 (11.4) .07 34 1.2 A 051 1 5.73 (145.5) 5.23 (132.8) 2.88 (73.2) .25 (6.4) 1.4
44、2 (36.1) .39 (9.9) .64 (16.3) .38 (9.7) .50 (12.7) .25 (6.4) .69 (17.5) - .11 (2.8) - 100 - N/A 052 3 1.25 (31.8) .77 (19.6) .23 (5.8) .25 (6.4) .40 (10.2) .39 (9.9) .56 (14.2) .25 (6.4) .53 (13.5) .26 (6.6) .83 (21.1) .58 (14.7) .12 (3.1) - 33 1.3 N/A 1/ Dimensions are in inches. 2/ Metric equivale
45、nts are given for general information only. 3/ Metric equivalents are in parentheses. 4/ .02 (0.5 mm). 5/ In cases where mounting with flat-head screws is used, the tolerance shall not exceed .005 inch (0.13 mm). 6/ Dimension given is nominal, tolerance is .030 (0.76 mm). 7/ Dimension given is nomin
46、al, tolerance is .010 (0.25 mm). 8/ Typical dimension. 9/ Except shock pulse shall be 7.0 .4 Gs for 50 1 milliseconds. 10/ Except shock pulse shall be 20 Gs peak value. MIL-DTL-15370/9H11Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15370/9
47、H TABLE II. Electrical requirements. Dash Number Frequency range Coupling (dB) Coupling variation (dB) max Effective directivity (dB) Insertion loss (dB) max VSWR max RF Input power to primary Reflected avg power (max) Nominal Tolerance Primary line Secondary line Over frequency range Avg Peak GHz W
48、atts Watts KW Watts 001 1-2 6 1.0 0.6 25 0.2 1.15:1 1.15:1 50 50 3 2 002 1-2 10 1.2 0.75 25 0.2 1.10:1 1.10:1 50 50 3 5 003 1-2 20 1.2 0.75 27 0.2 1.10:1 1.10:1 50 50 3 50 004 1-2 30 1.2 0.75 27 0.2 1.10:1 1.10:1 50 50 3 50 005 2-4 6 1.0 0.6 22 0.2 1.15:1 1.15:1 50 50 3 2 006 2-4 10 1.2 0.75 22 0.2 1.15:1 1.15:1 50 50 3