1、AMSC N/A FSC 5940 INCH-POUND MIL-DTL-24558/16B 3 October 2011 SUPERSEDING MIL-DTL-24558/16A 29 November 2004 DETAIL SPECIFICATION SHEET TERMINAL BOX, CONNECTION, SUBMERSIBLE (15-FOOT), 288-TERMINAL, 864-WIRE, 600 VOLTS, SYMBOL NO. 453 This specification is approved for use by all Departments and Age
2、ncies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-24558, “Terminal Boxes, Connection, for Electrical and Electronic Systems, General Specification for“. REQUIREMENTS: The terminal box shall be as spec
3、ified herein and in accordance with table I and figures 1 through 3. 1. Electrical rating. The terminal box shall have an electrical rating of 600 volts root mean square, and 600 volts direct current. The maximum current shall not exceed 30 amperes per stud of terminal board. 2. Dimensions and confi
4、guration. For dimensions and configuration see figures 1 through 3. All dimensions in figures 1 through 3 are expressed in decimal inches. Overall terminal box dimensions are approximate. Exact dimensions are shown in MIL-E-24142/6, “Enclosure, Submersible (15-Foot), Sizes 8 by 10 Through 14 by 26“.
5、 3. Tolerance. All tolerances not specified herein shall be in accordance with MIL-DTL-24558. 4. Standard parts. The standard parts shown in table I shall be used in the construction of the connection box specified herein. The numbers in circles shown on figures 1 and 2 are the same as those shown i
6、n the “Item“ column of table I. 5. Enclosure. The enclosure shall be a 15-foot submersible type. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/16B 2 6. Weight. The weight of the connection box shall not exceed 58.0 pounds. 7. Maximum
7、number of wires. The maximum number of wires (including spares) shall not exceed three times the number of terminals. The maximum number of wires to be connected to a single terminal shall not exceed three. QUALITY ASSURANCE: First article inspection and quality conformance inspection shall be as sp
8、ecified in MIL-DTL-24558. NOTES: 1. Drawing. The terminal box specified by this specification sheet was formerly covered on NAVSHIPS drawing no. 9000-S6202-74377. 2. Part or identifying number (PIN). The PIN to be used for terminal boxes acquired to this specification is created as follows: M 24558/
9、16 - 453 Symbol number Specification sheet number General specification number Denotes military specification TABLE I. Parts list. Item Description Qty Part number or specification Remarks 1 Enclosure assembly, brass with type A cover 1 MIL-E-24142/6 M24142/6-014 2 Identification plate 1 MIL-DTL-245
10、58 Figure 6 3 Information plate 1 MIL-DTL-24558 Figure 6 4 Mounting bracket 12 MIL-DTL-24558 Figure 1 5 Terminal board assembly 12 A-A-59125/12 6TB24 6 RDH machine screw 10-24 X 0.875 24 Commercial Brass 7 Washer, #10 external tooth 24 Commercial Bronze 8 RDH machine screw 6-32 X 0.250 4 Commercial
11、Brass Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/16B 3 FIGURE 1. Connection box assembly. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/16B 4 FIGURE 2. Location of t
12、erminal board mounting brackets. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/16B 5 FIGURE 3. Mounting dimensions. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/16B 6
13、CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing Activity: Navy - SH DLA - GS DLA - GS4 (Project 5940-2011-043) NOTE: The activities listed above were intereste
14、d in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
