1、 AMSC N/A FSC 6145 INCH-POUND MIL-DTL-25038/3E 15 February 2011 SUPERSEDING MIL-DTL-25038/3D1 December 2000 DETAIL SPECIFICATION SHEET WIRE, ELECTRICAL, HIGH TEMPERATURE, FIRE RESISTANT, FLIGHT CRITICAL, LIGHT WEIGHT, SMALL DIAMETER This specification is approved for use by all Departments and Agenc
2、ies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-25038. NICKEL COATED COPPER CONDUCTOR(AWG 12 THROUGH AWG 18)NICKEL COATED HIGH STRENGTH COPPERCONDUCTOR (AWG 20 AND AWG 22)INSULATION, INORGANIC BARRIER
3、 OREXTRUDED SILICONE RUBBERINNERWRAP - IMPREGNATED, INORGANIC,FIBROUS INSULATIONPRIMARY INSULATION - COMPOSITEMOISTURE/MECHANICAL BARRIEROUTER BRAID - TAPED AND FUSEDPTFE JACKETFIGURE 1. Wire electrical. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-
4、,-MIL-DTL-25038/3E 2 REQUIREMENTS: Design and construction: See figure 1. Temperature rating: 260 C. Voltage: 600 V rms. Color: Unless otherwise specified by the Part or Identifying Number (PIN), the color shall be white. Thermal shock: .060 inch maximum change in insulation measurement. PIN: M25038
5、/3 (wire size from table I) (color code designator in accordance with MIL-STD-681 and MIL-DTL-25038.) Examples: Size 20 AWG, white = M25038/3-20-9; Size 20 AWG, white with orange stripe = M25038/3-20-93. TABLE I. Finished wire construction and performance details. Wire size 1/ Conductor stranding 2/
6、 Maximum conductor diameter (inch) Maximum dc resistance 1,000 feet at 20 C (ohms) Finished wire diameter (inch) 3/ Weight lbs/1,000 feet (max) Performance details Number of strands AWG size Nominal diameter (inch) Bend and cold bend test mandrel Min. Max. Mandrel OD (inches) Load on mandrel (pounds
7、) 2219 34 .0063 .033 23.70 .040 .054 4.15 6 2 22H 4/19 34 .0063 .033 23.70 .055 .075 6.00 6 2 20 19 32 .0080 .041 15.27 .048 .083 9.00 6 2 18 19 30 .0100 .052 8.50 .065 .097 10.50 6 2 16 19 29 .0113 .061 6.66 .068 .103 13.50 8 3 14 19 27 .0142 .074 4.32 .097 .123 19.50 8 3 12 19 25 .0179 .093 2.78 .
8、100 .142 28.00 8 3 1/ Wire size 20 AWG and 22 AWG shall be constructed with nickel-coated high-strength copper strands. 2/ The conductor strands shall have an annular nickel coating, whose weight shall be not less than 27 percent of the total weight of the nickel-coated strand. 3/ These wires shall
9、comply with the sealing range requirements for firewall connectors as specified in SAE-AS50151, MIL-DTL-38999, and MIL-DTL-83723. 4/ The 22H wire is defined as heavy-wall or thick-wall version of size 22 wire for use in specific applications. It is considered to be “light weight, small diameter” whe
10、n compared with the normal weight size 22 of MIL-DTL-25038/1. The 22H wire should only be used with a size 20 type contact for MIL-DTL-38999 connectors. Changes from previous issue: Marginal notations are not used in this revision to identify changes with respect to the previous issues due to the ex
11、tensiveness of the changes. Referenced documents. In addition to MIL-DTL-25038, this document references the following: SAE-AS50151 MIL-STD-681 MIL-DTL-38999 MIL-DTL-83723 MIL-DTL-25038/1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-25038/
12、3E 3 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 85 (Project 6145-2010-016) DLA - CC Review activities: Army - AR, AV, MI Navy - OS Air Force - 99 NASA NA NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change. You should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
