1、 AMSC N/A FSC 6145 INCH-POUND MIL-DTL-27072/28D 12 March 2012 SUPERSEDING MIL-DTL-27072/28C8 December 2000 DETAIL SPECIFICATION SHEET CABLE, SPECIAL PURPOSE, ELECTRICAL, MULTICONDUCTOR (2 CONDUCTORS) AND SINGLE SHIELDED, M27072/28KACA* This specification is approved for use by all Departments and Ag
2、encies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-27072. REQUIREMENTS: RED WHITEFILLERSHIELD TINNED COPPERSHEATH POLYVINYL CHLORIDENOTE: The complete Part or Identifying Number (PIN) requires a color
3、 code designator (see table I). FIGURE 1. Cable configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-27072/28D 2 Design and construction: See figure 1 Number of conductors: 2 Temperature rating: 105 C Components: Basic wire: M16878/
4、17BGB* (see table I) Conductor: Tinned copper Primary insulation: Polyvinyl chloride Colors: Red White Jacket over Insulation: Polyamide Color: Natural Filler: Material: In accordance with MIL-DTL-27072 Lay: 1.0 inches maximum Cabling: Not applicable Binder tape material: Not applicable Shield: Mate
5、rial: Tinned copper Gauge: 36 AWG Braid angle: 20 to 40 degrees Jacket undershield: Not applicable Sheath: Material: Polyvinyl chloride Wall thickness: .030 inch nominal Tensile strength: In accordance with MIL-DTL-27072 Ultimate elongation: In accordance with MIL-DTL-27072 Accelerated aging: In acc
6、ordance with MIL-DTL-27072 Color: See MIL-DTL-27072 Finished cable: See table I Cold bend: Mandrel size in accordance with MIL-DTL-27072 Dielectric withstanding voltage: 2,000 V rms Conductor resistance: In accordance with basic wire specification TABLE I. Construction data. PIN 27072/28 Basic wire
7、except color M16878/17BGB*1/,2/(reference) Finished cable diameter inch (mm) 10% Wire size (AWG) Number of strands Strand size Nominal diameter inch (mm) KACA* 20 7 28 .064(1.63) .207(5.26) 1/ Asterisks (*) shall be replaced by the appropriate color designator. 2/ Dimensions are in inches. Metric eq
8、uivalents are given for information only. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-27072/28D 3 Changes from previous issue: Marginal notations are not used in this revision to identify changes with respect to the previous issues due to
9、 the extensiveness of the changes. Referenced document. This document references MIL-DTL-27072. CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - SH Air Force - 85 (Project 6145-2012-020) DLA CC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of this information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
