DLA MIL-DTL-287 3 G-2013 WAVEGUIDE ASSEMBLIES FLEXIBLE TWISTABLE CLASS 1.pdf

上传人:terrorscript155 文档编号:690403 上传时间:2018-12-30 格式:PDF 页数:9 大小:84.74KB
下载 相关 举报
DLA MIL-DTL-287 3 G-2013 WAVEGUIDE ASSEMBLIES FLEXIBLE TWISTABLE CLASS 1.pdf_第1页
第1页 / 共9页
DLA MIL-DTL-287 3 G-2013 WAVEGUIDE ASSEMBLIES FLEXIBLE TWISTABLE CLASS 1.pdf_第2页
第2页 / 共9页
DLA MIL-DTL-287 3 G-2013 WAVEGUIDE ASSEMBLIES FLEXIBLE TWISTABLE CLASS 1.pdf_第3页
第3页 / 共9页
DLA MIL-DTL-287 3 G-2013 WAVEGUIDE ASSEMBLIES FLEXIBLE TWISTABLE CLASS 1.pdf_第4页
第4页 / 共9页
DLA MIL-DTL-287 3 G-2013 WAVEGUIDE ASSEMBLIES FLEXIBLE TWISTABLE CLASS 1.pdf_第5页
第5页 / 共9页
点击查看更多>>
资源描述

1、AMSC N/A FSC 5985 MIL-DTL-287/3G 18 November 2013 SUPERSEDING MIL-DTL-287/3F 14 April 2009 DETAIL SPECIFICATION SHEET WAVEGUIDE ASSEMBLIES, FLEXIBLE, TWISTABLE, CLASS 1 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring

2、 the waveguide assemblies described herein shall consist of this specification sheet and MIL-DTL-287. REQUIREMENTS: See table I. Part or Identifying Number (PIN): See table I. First article approval by similarity: First article approval obtained for one waveguide assembly shall, with acquiring activ

3、ity approval, enable first article approval for other waveguide assemblies as specified in table II. Cross reference information: See table III. Substitution data: See table IV. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-287/3

4、G 2 TABLE I. Flexible, twistable waveguide assemblies. Group number PIN M287/3- 1/ TE10mode frequency range (GHz) Minimum centerline bending radius (inch) Repeated twist (degrees/ft) Insertion loss (dB/ft) Axial twist (degrees/ft) Pressur- ization lbf/in2gage VSWR 2/ (max) at E plane H plane 400 cyc

5、les 1x105cycles 12” 24” 36” 36” I 01-XXXX 02-XXXX 60-XXXX 1.12 - 1.70 “ “ 24.12 “ “ 48.08 “ “ 5.0 “ “ 1.5 “ “ 0.005 “ “ 10 “ “ 2 “ “ 1.05 “ “ 1.06 “ “ 1.07 “ “ 1.10 “ “ I 03-XXXX 04-XXXX 61-XXXX 1.70 - 2.60 “ “ 12.39 “ “ 25.95 “ “ 7.50 “ “ 2.25 “ “ 0.01 “ “ 15 “ “ 4 “ “ 1.06 “ “ 1.07 “ “ 1.08 “ “ “

6、“ “ I 05-XXXX 06-XXXX 62-XXXX 2.20 - 3.30 “ “ 11.14 “ “ 19.64 “ “ 11.0 “ “ 3.3 “ “ 0.015 “ “ 22 “ “ 5 “ “ “ “ “ “ “ “ “ “ “ “ “ “ I 07-XXXX 08-XXXX 09-XXXX 10-XXXX 11-XXXX 12-XXXX 13-XXXX 14-XXXX 63-XXXX 2.60 - 3.95 “ “ “ “ “ “ “ “ 6.88 “ “ “ “ “ “ “ “ 14.38 “ “ “ “ “ “ “ “ 14.5 “ “ “ “ “ “ “ “ 4.5

7、“ “ “ “ “ “ “ “ 0.02 “ “ “ “ “ “ “ “ 28 “ “ “ “ “ “ “ “ 15 “ “ “ “ “ “ “ “ 1.08 “ “ “ “ “ “ “ “ 1.09 “ “ “ “ “ “ “ “ 1.10 “ “ “ “ “ “ “ “ 1.12 “ “ “ “ “ “ “ “ II 15-XXXX 16-XXXX 17-XXXX 18-XXXX 19-XXXX 20-XXXX 21-XXXX 22-XXXX 64-XXXX 3.95 - 5.85 “ “ “ “ “ “ “ “ 4.94 “ “ “ “ “ “ “ “ 12.04 “ “ “ “ “ “

8、 “ “ 25.0 “ “ “ “ “ “ “ “ 7.5 “ “ “ “ “ “ “ “ 0.05 “ “ “ “ “ “ “ “ 50 “ “ “ “ “ “ “ “ 30 “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ II 23-XXXX 24-XXXX 25-XXXX 26-XXXX 27-XXXX 28-XXXX 29-XXXX 30-XXXX 65-XXXX 5.85 - 8.20 “ “ “ “ “ “ “ “ 3.88 “ “ “ “ “ “ “ “

9、 9.25 “ “ “ “ “ “ “ “ 35.0 “ “ “ “ “ “ “ “ 10.5 “ “ “ “ “ “ “ “ 0.08 “ “ “ “ “ “ “ “ 70 “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ II 31-XXXX 32-XXXX 33-XXXX 34-XXXX 35-XXXX 36-XXXX 37-XXXX 38-XXXX 66-XXXX 7.05 - 10.0 “ “ “ “ “ “ “ “ 3.5

10、7 “ “ “ “ “ “ “ “ 8.38 “ “ “ “ “ “ “ “ 42.5 “ “ “ “ “ “ “ “ 12.75 “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 85 “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 1.12 “ “ “ “ “ “ “ “ 1.14 “ “ “ “ “ “ “ “ 1.15 “ “ “ “ “ “ “ “ 1.18 “ “ “ “ “ “ “ “ See footnotes at end of table I. Provided by IHSNot for ResaleNo reproduction o

11、r networking permitted without license from IHS-,-,-MIL-DTL-287/3G 3 TABLE I. Flexible, twistable waveguide assemblies - Continued. Flexure (degrees/ft) 1x105cycles Jacket material Retention force (lbf) Operating temperature range Mates with standard rigid waveguide Flanges E plane H plane -55C to M

12、85/1- Flange 1 M3922/( ) Flange 2 M3922/( ) Material 3/ 4.5 4.5 4/ 2.2 2.2 4/ Neoprene “ “ N/A “ “ +100C “ “ 017 018 017 58-007 (contact) 58-008 (contact) 58-007 (contact) 58-007 (contact) 58-008 (contact) 58-007 (contact) CU AL CU 7.50 7.50 4/ 3.6 3.6 4/ “ “ “ “ “ “ “ “ “ 031 029 031 58-009 (contac

13、t) 58-010 (contact) 58-009 (contact) 58-009 (contact) 58-010 (contact) 58-009 (contact) CU AL CU 9.0 9.0 4/ 5.25 5.25 4/ “ “ “ “ “ “ “ “ “ 037 035 037 58-011 (contact) 58-012 (contact) 58-011 (contact) 58-011 (contact) 58-012 (contact) 58-011 (contact) CU AL CU 13.3 “ “ “ “ “ “ “ 4/ 6.4 “ “ “ “ “ “

14、“ 4/ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 043 041 043 041 043 041 043 041 043 64-001 (contact) 64-002 (contact) 56-001 (cover) 56-002 (cover) 61-002 (choke) 61-001 (choke) 61-002 (choke) 61-001 (choke) 61-002 (choke) 64-001 (contact) 64-002 (contact) 56-001 (cover) 56-002 (cover) 56

15、-001 (cover) 56-002 (cover) 61-002 (choke) 61-001 (choke) 56-001 (cover) CU AL CU AL CU AL CU AL CU 18.7 “ “ “ “ “ “ “ 4/ 7.6 “ “ “ “ “ “ “ 4/ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 055 053 055 053 055 053 055 053 055 63-001 (contact) 63-005 (contact) 57-002 (cover) 57-001 (cover) 62-

16、002 (choke) 62-001 (choke) 62-002 (choke) 62-001 (choke) 63-001 (contact) 63-001 (contact) 63-005 (contact) 57-002 (cover) 57-001 (cover) 57-002 (cover) 57-001 (cover) 62-002 (choke) 62-001 (choke) 63-001 (contact) CU AL CU AL CU AL CU AL CU 24.0 “ “ “ “ “ “ “ 4/ 10.2 “ “ “ “ “ “ “ 4/ “ “ “ “ “ “ “

17、“ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 067 065 067 065 067 065 067 065 067 63-002 (contact) 63-006 (contact) 55-001 (cover) 55-002 (cover) 60-001 (choke) 60-002 (choke) 60-001 (choke) 60-002 (choke) 63-002 (contact) 63-002 (contact) 63-006 (contact) 55-001 (cover) 55-002 (cover) 55-001 (cover) 55-0

18、02 (choke) 60-001 (choke) 60-002 (choke) 63-002 (contact) CU AL CU AL CU AL CU AL CU 26.1 “ “ “ “ “ “ “ 4/ 11.1 “ “ “ “ “ “ “ 4/ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 073 071 073 071 073 071 073 071 073 63-003 (contact) 63-007 (contact) 53-002 (cover) 53-004 (cover) 59-007 (choke) 59

19、-009 (choke) 59-007 (choke) 59-007 (choke) 63-003 (contact) 63-003 (contact) 63-007 (contact) 53-002 (cover) 53-004 (cover) 53-002 (cover) 53-004 (cover) 59-007 (choke) 59-009 (choke) 63-003 (contact) CU AL CU AL CU AL CU AL CU See footnotes at end of table I. Provided by IHSNot for ResaleNo reprodu

20、ction or networking permitted without license from IHS-,-,-MIL-DTL-287/3G 4 TABLE I. Flexible, twistable waveguide assemblies - Continued. Group number PIN M287/3- 1/ TE10mode frequency range (GHz) Minimum centerline bending radius (inch) Repeated twist (degrees/ft) Insertion loss (dB/ft) Axial twis

21、t (degrees/ft) Pressur- ization lbf/in2gage VSWR 2/ (max) at E plane H plane 400 cycles 1x105cycles 12” 24” 36” 36” II 39-XXXX 40-XXXX 41-XXXX 42-XXXX 43-XXXX 44-XXXX 45-XXXX 46-XXXX 67-XXXX 8.20 - 12.40 “ “ “ “ “ “ “ “ 3.38 “ “ “ “ “ “ “ “ 7.51 “ “ “ “ “ “ “ “ 47.5 “ “ “ “ “ “ “ “ 14.25 “ “ “ “ “ “

22、 “ “ 0.1 “ “ “ “ “ “ “ “ 95 “ “ “ “ “ “ “ “ 30 “ “ “ “ “ “ “ “ 1.14 “ “ “ “ “ “ “ “ 1.15 “ “ “ “ “ “ “ “ 1.16 “ “ “ “ “ “ “ “ 1.19 “ “ “ “ “ “ “ “ III 47-XXXX 48-XXXX 49-XXXX 50-XXXX 51-XXXX 52-XXXX 53-XXXX 68-XXXX 12.4 - 18.00 “ “ “ “ “ “ “ 2.75 “ “ “ “ “ “ “ 5.75 “ “ “ “ “ “ “ 60.0 “ “ “ “ “ “ “ 1

23、8.0 “ “ “ “ “ “ “ 0.25 “ “ “ “ “ “ “ 120 “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 1.13 “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 1.19 “ “ “ “ “ “ “ 1.24 “ “ “ “ “ “ “ III 54-XXXX 55-XXXX 56-XXXX 57-XXXX 58-XXXX 59-XXXX 69-XXXX 18.0 - 26.5 “ “ “ “ “ “ 2.33 “ “ “ “ “ “ 4.5 “ “ “ “ “ “ 82.5 “ “ “ “ “ “ 24.25 “ “ “ “ “ “ 0.35

24、 “ “ “ “ “ “ 165 “ “ “ “ “ “ “ “ “ “ “ “ “ 1.14 “ “ “ “ “ “ 1.16 “ “ “ “ “ “ 1.20 “ “ “ “ “ “ 1.25 “ “ “ “ “ “ See footnotes at end of table I. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-287/3G 5 TABLE I. Flexible, twistable waveguide as

25、semblies - Continued. Flexure (degrees/ft) 1x105cycles Jacket material Retention force (lbf) Operating temperature range Mates with standard rigid waveguide Flanges E plane H plane -55C to M85/1- Flange 1 M3922/( ) Flange 2 M3922/( ) Material 3/ 27.5 “ “ “ “ “ “ “ 4/ 12.3 “ “ “ “ “ “ “ 4/ Neoprene “

26、 “ “ “ “ “ “ “ N/A “ “ “ “ “ 100 100 N/A +100C “ “ “ “ “ “ “ “ 079 077 079 077 079 077 079 077 079 63-004 (contact) 63-008 (contact 53-001 (cover) 53-003 (cover) 59-006 (choke) 59-008 (choke) 59-006 (choke) 59-008 (choke) 63-004 (contact) 63-004 (contact) 63-008 (contact) 53-001 (cover) 53-003 (cove

27、r) 53-001 (cover) 53-003 (cover) 59-006 (choke) 59-008 (choke) 63-004 (contact) CU AL CU AL CU AL CU AL CU 33.7 “ “ “ “ “ “ 4/ 16.2 “ “ “ “ “ “ 4/ “ “ “ “ “ “ Plastic Neoprene “ “ “ “ “ “ “ “ “ “ “ “ “ “ +65C +100C 089 090 089 090 089 090 089 089 53-005 (cover) 53-006 (cover) 59-001 (choke) 59-002 (

28、choke) 59-001 (choke) 59-002 (choke) 53-005 (cover) 53-005 (cover) 53-005 (cover) 53-006 (cover) 53-005 (cover) 53-006 (cover) 59-001 (choke) 59-002 (choke) 53-005 (cover) 53-005 (cover) CU AL CU AL CU AL CU CU 45.0 “ “ “ “ “ 4/ 22.5 “ “ “ “ “ 4/ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 102 103 102

29、 103 102 103 102 54-001 (cover) 54-002 (cover) 59-003 (choke) 59-004 (choke) 59-003 (choke) 59-004 (choke) 54-001 (cover) 54-001 (cover) 54-002 (cover) 54-001 (cover) 54-002 (cover) 59-003 (choke) 59-004 (choke) 54-001 (cover) CU AL CU AL CU AL CU 1/ The PIN shall be the number shown and a four-digi

30、t number indicating the nominal relaxed length in inches. 2/ The VSWR value for any length between the lengths specified shall be the next higher value (e.g., for a 15-inch length of M287/03-01, the VSWR would be 1.06:1). 3/ CU = copper alloy, AL = aluminum alloy. 4/ These assemblies are constructed

31、 from beryllium copper and the flexure cycle is 106rather than 105. All other characteristics are as listed. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-287/3G 6 TABLE II. Grouping for first article approval. Group number First article ap

32、proved dash number Dash numbers of first articles approved by similarity, with procuring activity approval I 04 01, 02, 03, 05, 06, 07, 08, 09, 10, 11, 12, 13, and 14 I 61 60, 62, and 63 II 24 15 through 23 and 25 through 46 II 65 64, 66, and 67 III 47 48 through 53 III 55 54, 56 through 59 III 69 6

33、8 TABLE III. Cross reference (type designation to PIN). Type designation PIN M287/3- ( ) Type designation PIN M287/3- ( ) FG650AEEB FG430AEEB FG340AEEB FG284AEEB FG187AEEB FG137AEEB FG112AEEB FG090AEEB FG650AEEA FG430AEEA FG340AEEA FG284AEEA FG187AEEA FG137AEEA FG112AEEA FG090AEEA FG284ACCB FG187ACC

34、B FG137ACCB FG112ACCB FG090ACCB FG062ACCB 01 03 05 07 15 22 31 39 02 04 06 08 16 24 32 40 11 19 27 35 43 49 FG042ACCB FG284ACCA FG187ACCA FG137ACCA FG112ACCA FG090ACCA FG062ACCA FG042ACCA FG284ADDB FG187ADDB FG137ADDB FG112ADDB FG090ADDB FG062ADDB FG042ADDB FG284ADDA FG187ADDA FG137ADDA FG112ADDA FG

35、090ADDA FG062ADDA FG042ADDA 56 12 20 28 36 44 50 57 09 17 25 33 41 47 54 10 18 26 34 42 48 55 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-287/3G 7 TABLE IV. Substitution data. 1/ Dash number Manufacturers code (CAGE) Manufacturers PIN Das

36、h number Manufacturers code (CAGE) Manufacturers PIN 01 01 01 2AAJ0 06351 54647 AT2B650 TL-105064 MTP360300 28 28 28 2AAJ0 06351 54647 AT-7B137 TL-72315 MTP360327 02 02 02 2AAJ0 06351 54647 AT6B650 TL-102065 MTP360301 29 29 2AAJ0 54647 AT4B137 MTP360328 03 03 03 2AAJ0 06351 54647 AT2B430 TL-94158 MT

37、P360302 30 30 2AAJ0 54647 AT8B137 MTP360329 04 04 04 2AAJ0 06351 54647 AT6B430 TL-94154 MTP360303 31 31 31 2AAJ0 06351 54647 AT12B112 TL-68223 MTP360330 05 05 2AAJ0 54647 AT2B340 MTP360304 32 32 32 2AAJ0 06351 54647 AT16B112 TL-68224 MTP360331 06 06 2AAJ0 54647 AT6B340 MTP360305 33 33 33 2AAJ0 06351

38、 54647 AT2B112 TL-68216 MTP360332 07 07 07 2AAJ0 06351 54647 AT12B284 TL-86161 MTP360306 34 34 34 2AAJ0 06351 54647 AT6B112 TL-68205 MTP360333 08 08 08 2AAJ0 06351 54647 AT16B284 TL86162 MTP360307 35 35 35 2AAJ0 06351 54647 AT3B112 TL-68213 MTP360334 09 09 09 2AAJ0 06351 54647 AT2B284 TL-86164 MTP36

39、0308 36 36 36 2AAJ0 06351 54647 AT7B112 TL-68208 MTP360335 10 10 10 2AAJ0 06351 54647 AT6B284 TL-86165 MTP360309 37 37 2AAJ0 54647 AT4B112 MTP360336 11 11 11 2AAJ0 06351 54647 AT3B284 TL-86150 MTP360310 38 38 2AAJ0 54647 AT8B112 MTP360337 12 12 12 2AAJ0 06351 54647 AT7B284 TL-86163 MTP360311 39 39 3

40、9 2AAJ0 06351 54647 AT12B090 TL-64449 MTP360338 13 13 2AAJ0 54647 AT4B284 MTP360312 40 40 40 2AAJ0 06351 54647 AT16B090 TL-64450 MTP360339 14 14 2AAJ0 54647 AT8B284 MTP360313 41 41 41 2AAJ0 06351 54647 AT2B090 TL-64445 MTP360340 15 15 15 2AAJ0 06351 54647 AT12B187 TL-78173 MTP360314 42 42 42 2AAJ0 0

41、6351 54647 AT6B090 TL-64451 MTP360341 16 16 16 2AAJ0 06351 54647 AT16B187 TL-78174 MTP360315 43 43 43 2AAJ0 06351 54647 AT3B090 TL-64443 MTP360342 17 17 17 2AAJ0 06351 54647 AT2B187 TL-78175 MTP360316 44 44 44 2AAJ0 06351 54647 AT7B090 TL-64444 MTP360342 18 18 18 2AAJ0 06351 54647 AT6B187 TL-78176 M

42、TP360317 47 47 47 2AAJ0 06351 54647 AT2B062 TL-57108 MTP360346 19 19 19 2AAJ0 06351 54647 AT3B187 TL-78167 MTP360318 48 48 48 2AAJ0 06351 54647 AT6B062 TL-57110 MTP360347 20 20 20 2AAJ0 06351 54647 AT7B187 TL-78172 MTP360319 49 49 49 2AAJ0 06351 54647 AT3B062 TL-57109 MTP360348 21 21 2AAJ0 54647 AT4

43、B187 MTP360320 50 50 50 2AAJ0 06351 54647 AT7B062 TFT-57067 MTP360349 See footnote at end of table IV. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-287/3G 8 TABLE IV. Substitution data. 1/ - continued Dash number Manufacturers code (CAGE)

44、Manufacturers PIN Dash number Manufacturers code (CAGE) Manufacturers PIN 22 2AAJ0 54647 AT8B187 MTP360321 53 2AAJ0 AT2B062 23 23 2AAJ0 06351 54647 AT12B137 TL-72312 MTP360322 54 54647 MTP360352 24 24 2AAJ0 06351 54647 AT16B137 TL-72313 MTP360323 55 54647 MTP360353 25 25 2AAJ0 06351 54647 AT2B137 TL

45、-72316 MTP360324 56 54647 MTP360354 26 26 2AAJ0 06351 54647 AT6B137 TL-72317 MTP360325 57 54647 MTP360355 27 27 27 2AAJ0 06351 54647 AT3B137 TL-72314 MTP360326 58 54647 MTP360356 51 51 2AAJ0 54647 AT4B062 MTP360350 59 54647 MTP360357 52 52 2AAJ0 54647 AT8B062 MTP360351 1/ Assemblies covered by this

46、specification sheet are substitutable for the manufacturers PINs shown. This information in no way implies that the manufacturers part is substitutable for the military part. 2AAJ0 06351 Airtron Division Microwave Engineering Corporation Litton Systems Incorporated 1551 Osgood Street 200 East Hanove

47、r Avenue North Andover, MA 01845-1012 Morris Plains, NJ 07950-2442 http:/ 54647 Microtech, Inc. 1425 Highland Ave. Cheshire, CT 06410-1216 USA http/www.microtech- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-287/3G 9 Referenced documents.

48、This document only references MIL-DTL-287. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5985-2013-049) DLA-CC Review activities: Army - AR, AV, MI Navy - AS, CG, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1