1、AMSC N/A FSC 5935 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CRIMP CONTACTS, PLUG, CLASSES D, DS, P, T, TS, Z, AND ZS This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements
2、 for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-28840. Inches mm 1.938 49.23 FIGURE 1. Dimensions and configuration. MIL-DTL-28840/16D 14 November 2013 SUPERSEDING MIL-DTL-28840/16C 23 October 2009 INCH-POUND Provided by IHSNot for ResaleNo reproduct
3、ion or networking permitted without license from IHS-,-,-MIL-DTL-28840/16D 2 Shell size designator (See note 3) Q dia max A (11) 1.028 (26.11) B (13) 1.141 (28.98) C (15) 1.263 (32.08) D (17) 1.387 (35.23) E (19) 1.513 (38.43) F (23) 1.703 (43.26) G (25) 1.825 (46.36) H (29) 2.143 (54.43) J (33) 2.3
4、29 (59.16) NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Shell sizes are provided within parentheses for information and are not a part of the designator. 4. Dimensions apply after plating. 5. Normal mating key position shown. Alternate key positions sh
5、all be in accordance with MIL-DTL-28840. FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/16D 3 REQUIREMENTS: Dimensions and configuration: See figure 1. Classes: D, DS, P, T, TS, Z and Z
6、S. Insert arrangements: See the figure of MIL-STD-1698 corresponding to the desired shell size. Contacts: Pin or socket, crimp type, styles P, S, D, E, F or G, in accordance with MIL-DTL-28840. Shell polarization: 1 thru 6, key position. Marking: Part or Identifying Number (PIN) on shell. Mating cou
7、nterpart: Receptacle connectors in accordance with MIL-DTL-28840/10, /11, /12, /14, /20, and /21. Installation and removal tools: In accordance with MIL-I-81969/33 and /34. A backshell shall be used to meet the moisture and water pressure requirements. PIN example: M28840/ 16 A G 1 P 1 Military desi
8、gnator Specification sheet number Class code letter (Class D, code letter A) (Class DS, code letter B) (Class P, code letter F (Class T, code letter L) (Class TS, code letter N) (Class Z, code letter S) (Class ZS, code letter R) Shell size (See figure 1) Insert arrangement (See figure 1 and MIL-STD-
9、1698) Contact style (See MIL-DTL-28840) Keying (See MIL-DTL-28840) RESTRICTIONS: Classes D and DS are inactive for NAVSEA new design, unless approved by NAVSEA. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/16D 4 Changes from previous
10、 issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned
11、to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Referenced documents. In addition to MIL-DTL-28840, this document references the following: MIL-DTL-28840/10 MIL-DTL-28840/11 MIL-DTL-28840/12
12、 MIL-DTL-28840/14 MIL-DTL-28840/20 MIL-DTL-28840/21 MIL-I-81969/33 MIL-I-81969/34 MIL-STD-1698 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - EC Air Force - 85 DLA - CC (Project 5935-2013-114) Review activities: Army AV, MI Air Force 99 NOTE: The activities listed abov
13、e were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
