1、AMSC N/A FSC 5935 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, SCREW THREADS, HIGH DENSITY, HIGH SHOCK, SHIPBOARD, CRIMP CONTACTS, PLUG ASSEMBLY, STRAIGHT, CLASSES DJ, DJS, PJ, TJ AND ZJ This specification is approved for use by all Departments and Agencies of the Department of Defen
2、se. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-28840. FIGURE 1. Dimensions and configuration. MIL-DTL-28840/26D 11 January 2010 SUPERSEDING MIL-DTL-28840/26C 26 April 2007 INCH-POUND Provided by IHSNot for ResaleNo reproduction o
3、r networking permitted without license from IHS-,-,-MIL-DTL-28840/26D 2 Designator (See note 3) Assembly number (See note 6) Connector receptacle (See note 6) Backshell assembly number (See note 6) A cable entry max min A (11) M28840/26*A*A* M28840/16*A* M28840/601* .312 (7.92) .188 (4.78) A (11) M2
4、8840/26*A*B* M28840/16*A* M28840/624* .438 (11.13) .281 (7.14) A (11) M28840/26*A*C* M28840/16*A* M28840/625* .562 (14.27) .344 (8.74) B (13) M28840/26*B*B* M28840/16*B* M28840/603* .438 (11.13) .281 (7.14) B (13) M28840/26*B*C* M28840/16*B* M28840/626* .562 (14.27) .344 (8.74) B (13) M28840/26*B*D*
5、 M28840/16*B* M28840/627* .625 (15.88) .375 (9.53) B (15) M28840/26*C*A* M28840/16*C* M28840/605* .438 (11.13) .281 (7.14) C (15) M28840/26*C*B* M28840/16*C* M28840/606* .562 (14.27) .344 (8.74) C (15) M28840/26*C*C* M28840/16*C* M28840/628* .625 (15.88) .375 (9.53) C (15) M28840/26*C*D* M28840/16*C
6、* M28840/607* .750 (19.05) .438 (11.13) D (17) M28840/26*D*A* M28840/16*D* M28840/608* .625 (15.88) .375 (9.53) D (17) M28840/26*D*B* M28840/16*D* M28840/609* .750 (19.05) .438 (11.13) E (19) M28840/26*E*A* M28840/16*E* M28840/611* .625 (15.88) .375 (9.53) E (19) M28840/26*E*B* M28840/16*E* M28840/6
7、12* .938 (23.83) .625 (15.88) F (23) M28840/26*F*A* M28840/16*F* M28840/613* .750 (19.05) .438 (11.13) F (23) M28840/26*F*B* M28840/16*F* M28840/614* .938 (23.83) .625 (15.88) F (23) M28840/26*F*C* M28840/16*F* M28840/615* 1.188 (30.18) .812 (20.62) FIGURE 1. Dimensions and configuration Continued.
8、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/26D 3 Designator (See note 3) Assembly number (See note 6) Connector receptacle (See note 6) Backshell assembly number (See note 6) B thread class 2B E ref L max A (11) M28840/26*A*A* M288
9、40/16*A* M28840/601* .750-.1P.2L-D.S. .938 (23.83) 6.500 (165.10) A (11) M28840/26*A*B* M28840/16*A* M28840/624* .750-.1P.2L-D.S. 1.125 (28.58) 6.500 (165.10) A (11) M28840/26*A*C* M28840/16*A* M28840/625* .750-.1P.2L-D.S. 1.312 (33.32) 6.500 (165.10) B (13) M28840/26*B*B* M28840/16*B* M28840/603* .
10、875-.1P.2L-D.S. 1.125 (28.58) 6.500 (165.10) B (13) M28840/26*B*C* M28840/16*B* M28840/626* .875-.1P.2L-D.S. 1.312 (33.32) 6.500 (165.10) B (13) M28840/26*B*D* M28840/16*B* M28840/627* .875-.1P.2L-D.S. 1.312 (33.32) 7.000 (177.80) B (15) M28840/26*C*A* M28840/16*C* M28840/605* 1.062-.1P.2L-D.S. 1.12
11、5 (28.58) 6.500 (165.10) C (15) M28840/26*C*B* M28840/16*C* M28840/606* 1.062-.1P.2L-D.S. 1.312 (33.32) 6.500 (165.10) C (15) M28840/26*C*C* M28840/16*C* M28840/628* 1.062-.1P.2L-D.S. 1.312 (33.32) 7.000 (177.80) C (15) M28840/26*C*D* M28840/16*C* M28840/607* 1.062-.1P.2L-D.S. 1.593 (40.46) 7.000 (1
12、77.80) D (17) M28840/26*D*A* M28840/16*D* M28840/608* 1.125-.1P.2L-D.S. 1.312 (33.32) 7.000 (177.80) D (17) M28840/26*D*B* M28840/16*D* M28840/609* 1.125-.1P.2L-D.S. 1.593 (40.46) 7.000 (177.80) E (19) M28840/26*E*A* M28840/16*E* M28840/611* 1.312-.1P.2L-D.S. 1.312 (33.32) 7.000 (177.80) E (19) M288
13、40/26*E*B* M28840/16*E* M28840/612* 1.312-.1P.2L-D.S. 1.750 (44.45) 7.000 (177.80) F (23) M28840/26*F*A* M28840/16*F* M28840/613* 1.500-.1P.2L-D.S. 1.593 (40.46) 7.500 (190.50) F (23) M28840/26*F*B* M28840/16*F* M28840/614* 1.500-.1P.2L-D.S. 1.750 (44.45) 7.625 (193.68) F (23) M28840/26*F*C* M28840/
14、16*F* M28840/615* 1.500-.1P.2L-D.S. 2.093 (53.16) 7.812 (198.42) FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/26D 4 Designator (See note 1) Assembly number (See note 6) Connector rece
15、ptacle (See note 6) Backshell assembly number (See note 6) A Cable entry max min G (25) M28840/26*G*A* M28840/16*G* M28840/616* .938 (23.83) .625 (15.88) G (25) M28840/26*G*B* M28840/16*G* M28840/617* 1.188 (30.18) .812 (20.62) G (25) M28840/26*G*C* M28840/16*G* M28840/618* 1.250 (31.75) .875 (22.23
16、) G (25) M28840/26*G*D* M28840/16*G* M28840/619* 1.380 (35.05) 1.000 (25.40) H (29) M28840/26*H*A* M28840/16*H* M28840/620* 1.188 (30.18) .812 (20.62) H (29) M28840/26*H*B* M28840/16*H* M28840/621* 1.380 (35.05) 1.000 (25.40) J (33) M28840/26*J*A* M28840/16*J* M28840/622* 1.380 (35.05) 1.000 (25.40)
17、 J (33) M28840/26*J*B* M28840/16*J* M28840/623* 1.625 (41.28) 1.250 (31.75) FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/26D 5 Designator (See note 1) Assembly number (See note 6) Con
18、nector receptacle (See note 6) Backshell Assembly number (See note 6) B thread class 2B E ref L max G (25) M28840/26*G*A* M28840/16*G* M28840/616* 1.625-.1P.2L-D.S. 1.750 (44.45) 7.625 (193.68) G (25) M28840/26*G*B* M28840/16*G* M28840/617* 1.625-.1P.2L-D.S. 2.093 (53.16) 8.312 (211.12) G (25) M2884
19、0/26*G*C* M28840/16*G* M28840/618* 1.625-.1P.2L-D.S. 2.093 (53.16) 8.312 (211.12) G (25) M28840/26*G*D* M28840/16*G* M28840/619* 1.625-.1P.2L-D.S. 2.343 (59.51) 8.312 (211.12) H (29) M28840/26*H*A* M28840/16*H* M28840/620* 1.812-.1P.2L-D.S. 2.093 (53.16) 8.312 (211.12) H (29) M28840/26*H*B* M28840/1
20、6*H* M28840/621* 1.812-.1P.2L-D.S. 2.343 (59.51) 8.312 (211.12) J (33) M28840/26*J*A* M28840/16*J* M28840/622* 2.000-.1P.2L-D.S. 2.343 (59.51) 8.312 (211.12) J (33) M28840/26*J*B* M28840/16*J* M28840/623* 2.000-.1P.2L-D.S. 2.750 (69.85) 8.625 (219.08) NOTES: 1. Dimensions are in inches. 2. Metric eq
21、uivalents are given for information only. 3. Shell sizes are provided within parentheses for information and are not a part of the designator. 4. Dimensions apply after plating. 5. Normal mating key position shown. Alternate key positions in accordance with MIL-DTL-28840. 6. Assembly shall be made o
22、f a connector and backshell of the same material. FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/26D 6 REQUIREMENTS: Dimensions and configuration: See figure 1. Classes: DJ and DJS, PJ,
23、 TJ, ZJ. Insert Arrangements: See the section of MIL-STD-1698 corresponding to desired shell size. Contacts: Style P or S crimp type. Shell polarization: 1 thru 6, key position. Marking: Part or Identifying Number (PIN) on shell. Mating counterpart: Mating connector in accordance with MIL-DTL-28840/
24、16, 17, 18, 19, 26, 28 and 29. Installation and removal tool: In accordance with MIL-I-81969/33 and /34. PINs shown indicate aluminum alloy hardware. If corrosion resistant steel parts are required, the connector and accessory PINs must be changed to designate corrosion resistant hardware. PIN examp
25、le: M28840/26C G 1 A A P 1 Specification sheet number1, 2, 3, 4, 5, 6 Position Key position Contact designator Backshell style Backshell designator Insert arrangement Shell size Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes fr
26、om the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the margina
27、l notations and relationship to the last previous issue. Classes Code letter DJ C DJS E PJ G TJ M ZJ U Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/26D 7 Referenced documents. In addition to MIL-DTL-28840, this document references th
28、e following: MIL-DTL-28840/6 MIL-DTL-28840/16 MIL-DTL-28840/17 MIL-DTL-28840/18 MIL-DTL-28840/19 MIL-DTL-28840/28 MIL-DTL-28840/29 MIL-I-81969/33 MIL-I-81969/34 MIL-STD-1698 CONCLUDING MATERIAL Custodians: Preparing activity: Navy - EC DLA - CC DLA - CC (Project 59352008-011) NOTE: The activities li
29、sted above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
