1、 INCH-POUND MIL- DTL-32075 October 17, 2000 SUPERSEDING DDD-L-20F March 30, 1990 DETAIL SPECIFICATION LABEL: FOR CLOTHING, EQUIPAGE, AND TENTAGE, (GENERAL USE) This General Services Administration has authorized the use of this Military Detail Specification in preference to DDD-L-20, for the use of
2、all Federal agencies. 1. SCOPE 1.1 Scope. This specification covers the requirements for nine types of labels, utilized in fabricated textile, plastic coated, and leather items. 1.2 Classification. The labels will be of the following types and classes, as specified (see 6.2 and 6.5). Type: III Marki
3、ng, heat transfer (decalcomania) IV Marking, direct printing, stamping, or stenciling V Label, cloth, cotton, polyester or polyester/cotton blend; heat sealable, adhesive coated, printed VI Label, nonwoven, spunbonded polyester cloth or nonwoven, 80/20 polyester/cellulose cloth, impregnated, acrylic
4、 coated, mildew-resistant printed Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Supply Center Philadelphia, Clothing and Textiles Directorate, ATTN: DSCP-CRFD, 700 Robbins Avenue, Bldg
5、 6D, Philadelphia, PA 19111-5094. AMSC N/A FSC 8315 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-32075 2Type: (contd) VII Pressure-sensitive label, smooth fi
6、nish white paper, rubber-based adhesive with high initial tack, basis weight 20 pounds, bar coded VIII Tag, paper, standard bleach sulfate, basis weight 100 pounds, bar coded IX Label, heat sealable, durable barcoded Class: 1 Identification label for garments 2 Size label for garments 3 Instruction
7、label for garments 4 Combination identification and size label for headwear, neckwear, and handwear 5 Identification label for equipage 6 Identification label for tentage 7 Instruction label for tentage 8 Identification label for tarpaulins and covers 9 Special markings 10 Personal identification la
8、bel 11 Identification label for aerial delivery items 12 Identification label for coated items 13 Instruction label for coated items (durable) 14 Combination size, identification and instruction label for garments 15 Combination identification and instruction label for garments 16 Combination identi
9、fication and special markings for equipage 17 Bar coding label/tag for personal clothing items 18 Bar coding label for organizational items 2 APPLICABLE DOCUMENTS SPECIFICATIONS Military Specifications: MIL-PRF-680 Degreasing Solvent MIL-L-15040 Label Garment (Woven Rayon) 2.1 Government publication
10、s. Unless otherwise specified the following documents of the issue in effect on date of invitation for bids or request for proposal form a part of this specification to the extent specified herein. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-
11、DTL-32075 3(Activities outside the Federal Government may obtain copies of Federal specifications, standards, and commercial item descriptions as outlined under General Information in the Index of Federal Specifications, Standards and Commercial Item Descriptions. The Index, which includes cumulativ
12、e bimonthly supplements as issued, is for sale on a subscription basis by the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402-0001.) (Single copies of this specification, other Federal specifications, and commercial item descriptions required by Services Administra
13、tion Business Service Centers in Boston, MA; New York, NY; Philadelphia, PA; Washington, DC; Atlanta, GA; Chicago, IL; Kansas City, MO; Fort Worth, TX; Denver, CO; San Francisco, CA; Los Angeles, CA; and Seattle, WA.) (Federal Government activities may obtain copies of Federal standardization docume
14、nts and the Index of Federal Specifications, Standards, and Commercial Item Descriptions from established distribution points in their agencies.) (Unless otherwise indicated, copies of the above specifications, standards, and handbooks are available from the Standardization Document Order Desk, 700
15、Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) Federal Regulations: Federal Trade Commission Rules and Regulations Under the Fur Products Labeling Act Rules and Regulations Under the Textile Fiber Products Identification Act Rules and Regulations Under the Wool Products Labeling Act of 1
16、939 (The Code of Federal Regulations (CFR) and the Federal Register (FR) are for sale on a subscription basis by the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402-0001. When indicated, reprints of certain regulations may be obtained from the Federal agency respon
17、sible for issuance thereof.) 2.2 Other publications. The following documents form a part of this specification to the extent specified herein. Unless a specific issue is identified, the issue in effect on date of invitation for bids or request for proposal will apply. American Association of Textile
18、 Chemists and Colorists (AATCC) Technical Manual of the American Association of Textile Chemists and Colorists Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-32075 4Method 8 Colorfastness to Crocking Method 61 Colorfastness to Washing, Domes
19、tic; and Laundering, Commercial: Accelerated Method 111A Weather Resistance Method 133 Colorfastness to Heat and Hot Pressing (Application for copies should be addressed to the American Association of Textile Chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC 277092215.) American Soc
20、iety for Testing and Materials (ASTM) D-1876 Peel Resistance of Adhesives (T-Peel Test) D-1922 Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method D-3951 Standard Practice for Commercial Packaging D-3776 Weight D-751 Blocking for Coated Fabrics D-5034 Breaking Strength D
21、-1974 Fiberboard Boxes, Methods of Closing, Sealing and Reinforcing D-1424 Tearing Strength of Fabric by Failing-Pendulum Type (Elmendorf) Apparatus D-6199 Standard Practice for Quality of Wood Members of Containers and Pallets D-3786 Fabrics, Knitted Goods and Nonwoven, Diaphragm Bursting Strength
22、Tester Method, Hydraulic Bursting Strength (Applications for copies should be addressed to American Society For testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428). Aim USA BC1 Uniform Symbology Specification Code 39 (Applications for copies should be addressed to AIM USA 634
23、Alpha Drive Pittsburgh, PA 15238-2802) American Society For Quality Control ASQC-Z1.4 Sampling Procedures and Tables for Inspection by Attributes Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-32075 5(Applications for copies should be addres
24、sed to the American National Standards Institute, 11 42 street, New York, NY 10036) 3. REQUIREMENTS 3.1 Samples. Unless otherwise specified, the labels, tags, and markings will be equal to the standard sample with respect to legibility, quality of printing, colorfastness of printing, durability of f
25、inish, and where applicable, in the ability to accept writing. 3.2 Materials. It is encouraged that recycled material be used when practical as long as it meets the requirements of this specification. 3.2.1 Type III marking. Heat transfer (decalcomania) markings will be applied by a dry-heat transfe
26、r process. The initial print will be well defined, clearly legible, and will not show smearing, bleeding, or offsetting and will not show objectionable strike-through of the cloth to which applied. Unless otherwise specified, the printing will be black. 3.2.2 Type IV marking. Unless otherwise specif
27、ied, type IV markings will be applied to the cloth by a black marking medium. The initial print will be well defined, clearly legible, and will not show smearing, bleeding, or offsetting and will not show objectionable strike-through of the cloth to which applied. 3.2.3 Type V label. Type V labels w
28、ill be cotton, polyester, or polyester/cotton blend, coated on one side with heat sealable adhesive and will be printed. 3.2.3.1 Cloth. Unless otherwise specified (see 6.2), the label cloth will be white undyed cotton, polyester, or a blend of undyed cotton and polyester. The finished, heat-sealable
29、, adhesive-coated cloth will weigh not less than 4.5 nor more than 10.0 ounces per square yard and will have a minimum of 80 ends per inch in the warp and 72 picks per inch in the filling when tested 3.2.3.2 Adhesive coating. The reverse side of the label will be coated with a heat sealable adhesive
30、. The bond strength of the label after heat sealing will be a minimum of 20 pounds when tested in accordance with the method specified in 4.2.3. The bond strength will also be determined on samples subjected to accelerated laundering or dry cleaning tests specified in 4.2.3, as applicable. The label
31、s for the tests will be heat sealed to materials specified in end item specifications. Heat sealing of samples for tests will be in accordance with the temperature, pressure, and time elements used in production applications of the adhesive being tested. 3.2.3.3 Blocking. The coated labels for types
32、 V, VI, and IX shall not block to an extent greater than represented by scale rating No. 2 when tested as specified in 4.2.3. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-32075 63.2.3.4 Printing medium. Unless otherwise specified (see 6.2)
33、, the color of the label printing medium will be black and will consist of suitable nontoxic dye(s) or pigment(s) in a medium that yields a permanent impression suitable for heat-sealing temperatures and later processing. The printing initial and after heat-sealing, will not show offsetting, smearin
34、g, bleeding, or discoloration. 3.2.4 Type VI label. The cloth for type VI label will be impregnated and coated with a permanent pigmented acrylic composition. 3.2.4.1 Basic cloth. The basic cloth will be a nonwoven material of either spunbonded polyester made from 4.0 denier (44 Tex) continuous fila
35、ment white polyester fiber or 80/20 polyester/cellulose material. The cloth fibers will be randomly dispersed and bonded at filament junctions. The overall weight of the basic cloth will be not more than 2.2 ounces per square yard when tested as specified in 4.2.3. 3.2.4.2 Coating. The impregnation
36、coating will be a pigmented acrylic or nitrocellulose coating composed of white pigments such as clay, chalk, titanium dioxide, or blane fixe, and affixed by an appropriate acrylic or nitrocellulose resin when tested as specified in 4.2.3. The coating composition will not contain leachable skin irri
37、tants or toxic materials. Substances that will support mildew growth will not be included. The finished impregnated labels will have a smooth matte surface and will be free from objectionable odors (see table II). 3.2.4.3 Physical requirements. The finished impregnated label will be as specified in
38、table I when tested as specified in 4.2.3. TABLE I. Physical requirements for Type VI finished label Breaking Strength Tearing strength Bursting Weight (lb.) minimum (lb. minimum Strength (oz .per sq. yd) Machine Transverse Machine Transverse psi Minimum Direction Direction Direction Direction Minim
39、um 3.2 15 10 300 250 50 3.2.4.4 Color. Unless otherwise specified (see 6.2), the color of the finished label will be bleached white. 3.2.4.5 Printing medium. Unless otherwise specified (see 6.2), the labels will be printed with a black marking medium. The initial printing will be legible and shall n
40、ot show offsetting, smearing, or bleeding. 3.2.4.6 Blocking. Blocking for type VI labels will be as specified in 3.2.3.3. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-32075 73.2.5 Type VII bar coding. Unless otherwise specified, the paper
41、for the pressure-sensitive labels will have a finish compatible with printing technology used. The adhesive will require no solvent, heat, or other preparation prior to application and it will adhere to the surfaces under high or low temperatures. Pressure-sensitive labels will be placed on the outs
42、ide of individually packaged clothing items. Bar coded labels will be clearly legible and readable by a scanner. 3.2.6 Type VIII bar coding. The paper used for the tags will have a smooth finish to accept thermal transfer and direct thermal printing. Bar coded tags will have a hole with its center n
43、o more than 1/2 inch from the tying end. The hole will be centered and have a diameter of 5/32 1/32 inch, and it will be attached to each clothing item by a fastener. Bar coded tags will be clearly legible and readable by a scanner. 3.2.7 Type IX durable bar coding label. The material used for the d
44、urable bar coded label will be white, coated polyester, clear cross-linked polyurethane resin with pigmented layers or any other material that will meet the requirements in this specification for type IX. The finished printed bar coded label will be heat sealed to materials specified in the end item
45、 specification. Heat sealing will be done at conditions compatible with the fiber content and must remain permanently bonded to the garment and be resistant to removal by laundering, dry cleaning, and normal wear. 3.2.7.1 Blocking. Blocking for type IX labels will be specified in 3.2.3.3. 3.2.7.2 Pr
46、inting medium. The color of the label printing medium will be black and the printing medium will consist of suitable nontoxic ink in a medium that yields a permanent impression suitable for heat-sealing temperatures and later processing. The printing, initial and after heat-sealing, will not show of
47、f-setting, smearing, bleeding, or discoloration and will maintain a readable bar code symbol in compliance with AIM-BC1 for useful life of the garment. 3.3 Printing (see 6.2). 3.3.1 Print type. All classes of labels with the exception of classes 17 and 18 will be printed with Gothic sanserif type. I
48、talic or script type shall not be used. All printing will be in capitals except instruction labels, which will be as specified in 3.3.2.3. 3.3.2 Print format. Unless otherwise specified (see 6.2), all classes of labels (1-16) will be printed with the contents, and in the format and size of print specified below. For classes 17 and 18, the bar code density will be medium to high
