DLA MIL-DTL-3607 9 B-2013 CONNECTOR RECEPTACLE ELECTRICAL SERIES PULSE TYPE UG-182A U.pdf

上传人:arrownail386 文档编号:690628 上传时间:2018-12-30 格式:PDF 页数:2 大小:30.23KB
下载 相关 举报
DLA MIL-DTL-3607 9 B-2013 CONNECTOR RECEPTACLE ELECTRICAL SERIES PULSE TYPE UG-182A U.pdf_第1页
第1页 / 共2页
DLA MIL-DTL-3607 9 B-2013 CONNECTOR RECEPTACLE ELECTRICAL SERIES PULSE TYPE UG-182A U.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 MIL-DTL-3607/9B 24 July 2013 SUPERSEDING MIL-C-3607/9A 2 August 1963 DETAIL SPECIFICATION SHEET CONNECTOR, RECEPTACLE, ELECTRICAL, SERIES PULSE, TYPE UG-182A/U This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the pro

2、duct described herein shall consist of this specification sheet and MIL-DTL-3607. NOTES: 1. Dimensions are in inches. 2. Unless otherwise specified, tolerances are .005 on decimal. 3. Spring, REA10035-2, Collar, REA10471; and Bushing, REA10472-1, shall not be plated. Contacts, REB10082-3 and REB1049

3、6, shall have a silver plating of not less than 0.0002 inch thick. All other metal parts shall have a tin plating of not less than 0.0002 inch thick. Figure 1. Type UG-182A/U electrical plug connector. AMSC N/A FSC 5935 Inches mm 1.3125 33.375 INCH - POUNDProvided by IHSNot for ResaleNo reproduction

4、 or networking permitted without license from IHS-,-,-MIL-DTL-3607/9B 2 REQUIREMENTS The electrical plug connector shall be of the design, construction, and physical dimensions specified on figure 1. QUALITY ASSURANCE PROVISIONS Sampling and inspection shall be in accordance with MIL-DTL-3607, and a

5、s specified herein. Leakage: The leakage test is not applicable. Dielectric withstanding voltage: The test voltage for the dielectric-withstanding-voltage-test shall be 9,000 volts, root mean square. Part or Identifying Number (PIN): M3607/9-01 Marginal notations are not used in this revision to ide

6、ntify changes with respect to the previous issue due to the extent of the changes. Referenced documents. This document references MIL-DTL-3607. . CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy EC Air Force - 85 DLA - CC Review activities: (Project 5935-2013-081) Air Forc

7、e 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • DIN EN 61300-2-15-2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15 Tests - Torque strength of coupling mechanism .pdf DIN EN 61300-2-15-2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15 Tests - Torque strength of coupling mechanism .pdf
  • DIN EN 61300-2-17-2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17 Tests -Cold (IEC 61300-2-17 2010) German versi.pdf DIN EN 61300-2-17-2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17 Tests -Cold (IEC 61300-2-17 2010) German versi.pdf
  • DIN EN 61300-2-18-2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18 Tests - Dry heat - High temperature endurance .pdf DIN EN 61300-2-18-2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18 Tests - Dry heat - High temperature endurance .pdf
  • DIN EN 61300-2-19-2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19 Tests - Damp heat (steady state) (IEC 61300-2-.pdf DIN EN 61300-2-19-2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19 Tests - Damp heat (steady state) (IEC 61300-2-.pdf
  • DIN EN 61300-2-2-2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2 Tests - Mating durability (IEC 61300-2-2 2009) G.pdf DIN EN 61300-2-2-2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2 Tests - Mating durability (IEC 61300-2-2 2009) G.pdf
  • DIN EN 61300-2-21-2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21 Tests - Composite temperature humidity cyclic .pdf DIN EN 61300-2-21-2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21 Tests - Composite temperature humidity cyclic .pdf
  • DIN EN 61300-2-22-2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22 Tests - Change of temperature (IEC 61300-2-22 .pdf DIN EN 61300-2-22-2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22 Tests - Change of temperature (IEC 61300-2-22 .pdf
  • DIN EN 61300-2-23-2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23 Tests - Sealing for non-pressurized closures o.pdf DIN EN 61300-2-23-2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23 Tests - Sealing for non-pressurized closures o.pdf
  • DIN EN 61300-2-24-2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24 Tests - Screen testing of ceramic alignment sp.pdf DIN EN 61300-2-24-2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24 Tests - Screen testing of ceramic alignment sp.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1