1、 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, THREADED, JAM-NUT MOUNTING, REMOVABLE CRIMP CONTACTS, SERIES III, METRIC This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described
2、 herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, classes F, G, J, K, M, P, R, S, T, W, X and Z. AMSC N/A FSC 5935 METRIC MIL-DTL-38999/24J 31 October 2011 SUPERSEDING MIL-DTL-38999/24H 10 July 2008 Provided by IHSNot for ResaleNo reproduction or networking p
3、ermitted without license from IHS-,-,-MIL-DTL-38999/24J 2 FIGURE 1. Receptacle, classes F, G, J, K, M, P, R, S, T, W, X and Z - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/24J 3 Dimensions Shell size Shell size code A dia
4、 0.3 B flat + 0.10 - 0.15 C dia + 0.1 - 0.2 D + 0.13 - 0.03 E 0.13 F dia max 9 A 30.2 (1.189) 16.53 (.651) 17.4 (.685) 2.39 (.094) 1.14 (.045) 15.9 (.626) 11 B 34.9 (1.374) 19.07 (.751) 20.6 (.811) 2.39 (.094) 1.14 (.045) 18.8 (.740) 13 C 38.1 (1.500) 23.82 (.938) 25.4 (1.000) 2.39 (.094) 1.14 (.045
5、) 23.8 (.937) 15 D 41.3 (1.626) 26.97 (1.062) 28.5 (1.122) 2.39 (.094) 1.14 (.045) 26.8 (1.055) 17 E 44.5 (1.752) 30.15 (1.187) - 2.39 (.094) 1.14 (.045) 30.8 (1.213) 19 F 49.2 (1.937) 33.32 (1.312) - 3.58 (.141) 1.91 (.075) 33.8 (1.331) 21 G 52.4 (2.063) 36.50 (1.437) - 3.58 (.141) 1.91 (.075) 36.8
6、 (1.449) 23 H 55.6 (2.189) 39.67 (1.562) 41.2 (1.622) 3.58 (.141) 1.91 (.075) 39.8 (1.567) 25 J 58.7 (2.311) 42.85 (1.687) 44.4 (1.748) 3.58 (.141) 1.91 (.075) 42.8 (1.685) FIGURE 1. Receptacle, classes F, G, J, K, M, P, R, S, T, W, X and Z - Continued. Provided by IHSNot for ResaleNo reproduction o
7、r networking permitted without license from IHS-,-,-MIL-DTL-38999/24J 4 Dimensions Shell size Shell size code G Thread J + 0.0 - 0.71 P + 0.6 - 0.0 S 0.4 W + 0.9 - 0.1 Recommended O-ring SAE-AS3582 (see note 4) External bending moment Classes J and M (NewtonMeters) 9 A M17x1-6g 0.100R 1.5 (.059) 14.
8、1 (.555) 27.0 (1.063) 2.2 (.087) -019 8.5 11 B M20x1-6g 0.100R 1.5 (.059) 14.1 (.555) 31.8 (1.252) 2.2 (.087) -022 14.1 13 C M25x1-6g 0.100R 1.5 (.059) 14.1 (.555) 34.9 (1.374) 2.2 (.087) -024 19.8 15 D M28x1-6g 0.100R 1.5 (.059) 14.1 (.555) 38.1 (1.500) 2.2 (.087) -026 28.2 17 E M32x1-6g 0.100R (se
9、e note 2) - 14.1 (.555) 41.3 (1.626) 2.2 (.087) -028 36.7 19 F M35x1-6g 0.100R - 14.1 (.555) 46.0 (1.811) 3.0 (.118) -128 45.2 21 G M38x1-6g 0.100R - 14.1 (.555) 49.2 (1.937) 3.0 (.118) -130 53.7 23 H M41x1-6g 0.100R 1.5 (.059) 14.1 (.555) 52.4 (2.063) 3.0 (.118) -132 62.1 25 J M44x1-6g 0.100R 1.5 (
10、.059) 14.1 (.555) 55.6 (2.189) 3.0 (.118) -134 73.4 NOTES: 1. Dimensions are in millimeters. Inch equivalents are given for information only. 2. Modified major diameter: 31.95 - 31.80. 3. Panel thickness: 3.2 - 1.58. 4. Alternate O-ring material may be SAE-AMS3325 (fluorosilicone O-ring). Fluorosili
11、cone materials have greater hydrocarbon fluid resistance than silicone materials and should be considered for applications where resistance to hydrocarbon fluids is critical. 5. C and J dimensions define feature required for proper fit in type E panel. 6. F diameter defines thread start. 7. This dim
12、ension applies to sizes 17, 19, and 21 only (C and G diameters are the same). 8. Countersink may be incorporated to accept accessory configuration in accordance with MIL-DTL-38999. 9. Classes J and M should not be used when critical connector to panel bonding (below 10 millivolts) is required. 10. F
13、or classes J and M only, overall shell length is increased to 33.0 mm (1.300 in) max. FIGURE 1. Receptacle, classes F, G, J, K, M, P, R, S, T, W, X and Z - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/24J 5 REQUIREMENTS: D
14、imensions and configuration: See figure 1. Interface dimensions shall be in accordance with MIL-DTL-38999. This connector mates with MIL-DTL-38999/26. O-ring and MIL-DTL-38999/28 nut shall be provided with jam-nut receptacle. For insert arrangements: See MIL-STD-1560. Connector accessories: See SAE-
15、AS85049. Part or Identifying Number (PIN) example: D38999/ 24 W A 35 P N DoD number prefix Specification sheet number Class Shell size code Insert arrangement Contact style Polarizing positions N is required for normal position Class F is not for Navy use and is inactive for Air Force new design use
16、. NOTE: The term PIN is equivalent to the term (part number, identification number, and type designator) which was previously used in this specification. Qualification required: The activity responsible for the qualified products list for this specification sheet is DLA Land and Maritime-VQ, P.O. Bo
17、x 3990, Columbus, Ohio 43218-3990. Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in
18、 these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Provided by IHSNot for ResaleNo reproduction or networking permitted without license f
19、rom IHS-,-,-MIL-DTL-38999/24J 6 Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-STD-1560 MIL-DTL-38999/26 MIL-DTL-38999/28 SAE-AMS3325 SAE-AS85049 SAE-AS3582 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 8
20、5 (Project 5935-2011-113) DLA - CC Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
