1、METRIC MIL-DTL-38999/25C 29 August 2011 SUPERSEDING MIL-DTL-38999/25B 10 July 2008 DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRICAL, CIRCULAR, THREADED, RECEPTACLE, SOLDER MOUNTING, HERMETIC, HERMETIC SOLDER CONTACTS, SERIES III, METRIC This specification is approved for use by all Departments and A
2、gencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, classes N and Y. AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproduction or networking permitted without license
3、 from IHS-,-,-MIL-DTL-38999/25C 2 Shell size Shell size code F max L max S max V max with pins V max with sockets Z max 9 A 17.1 (.673) 5.1 (.201) 19.4 (.764) 17.2 (.677) 19.4 (.764) 23.8 (.937) 11 B 19.9 (.783) 5.1 (.201) 21.8 (.858) 17.2 (.677) 19.4 (.764) 23.8 (.937) 13 C 23.1 (.909) 5.1 (.201) 2
4、4.9 (.980) 17.2 (.677) 19.4 (.764) 23.8 (.937) 15 D 26.2 (1.031) 5.1 (.201) 28.1 (1.106) 17.2 (.677) 19.4 (.764) 23.8 (.937) 17 E 29.4 (1.157) 5.1 (.201) 31.3 (1.232) 17.2 (.677) 19.4 (.764) 23.8 (.937) 19 F 31.8 (1.252) 5.1 (.201) 33.6 (1.323) 17.2 (.677) 19.4 (.764) 23.8 (.937) 21 G 35.0 (1.378) 5
5、1 (.201) 36.8 (1.449) 17.2 (.677) 19.4 (.764) 23.8 (.937) 23 H 38.2 (1.504) 5.9 (.232) 40.0 (1.575) 17.2 (.677) 19.4 (.764) 24.6 (.969) 25 J 41.3 (1.626) 5.9 (.232) 43.2 (1.701) 17.2 (.677) 19.4 (.764) 24.6 (.969) NOTES: 1. Dimensions are in millimeters. 2. Polarizing position N is shown. 3. Inch e
6、quivalents are given for information only. FIGURE 1. Receptacle, classes N and Y - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/25C 3 REQUIREMENTS: Dimensions and configurations: See figure 1. Interface dimensions shall co
7、nform to MIL-DTL-38999. This connector mates with MIL-DTL-38999/26. For insert arrangements, see MIL-STD-1560. Part or Identifying Number (PIN) example: D38999/ 25 Y A 35 P N DoD no. prefix Specification sheet no. Class Shell size code Insert arrangement Contact style Polarizing position (N is requi
8、red for normal position) Eyelet contact termination: See MIL-DTL-38999. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this docu
9、ment references the following: MIL-DTL-38999/26 MIL-STD-1560 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/25C 4 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA - CC Navy - AS Air Force - 85 (Project 5935-2011-085) DLA
10、 - CC Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 DLA IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
