1、 MIL-DTL-38999/43B 8 September 2010 SUPERSEDING MIL-DTL-38999/43A 11 June 2001 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, JAM NUT MOUNTING, HERMETIC, BREECH COUPLING, HERMETIC SOLDER CONTACTS, SERIES IV, METRIC This specification is approved for use by all Departments a
2、nd Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, classes N and Y. AMSC N/A FSC 5935 mm Inches 36.8 1.44 8.5 .334 5.9 .232 3.2 .125 1.5 .059 1.3 .051 .2 .007 METRIC
3、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/43B 2 Shell size Shell size code A B flat C dia boss E dia F dia 11 B 35.2 (1.38) 34.6 (1.36) 19.17 (.754) 18.92 (.744) 20.70 (.814) 20.40 (.803) 18.6 (.732) 18.2 (.716) 19.8 (.779) 19.3 (
4、759) 13 C 38.4 (1.51) 37.8 (1.488) 23.92 (.941) 23.67 (.931) 25.50 (1.00) 25.20 (.992) 21.8 (.858) 21.3 (.838) 23.1 (.909) 22.6 (.889) 15 D 41.6 (1.63) 41.0 (1.64) 27.07 (1.06) 26.82 (1.05) 28.60 (.992) 28.30 (1.11) 25.0 (.984) 24.6 (.968) 26.3 (1.03) 25.8 (1.01) 17 E 44.8 (1.76) 44.2 (1.74) 30.25
5、1.19) 30.00 (1.18) 31.98 (1.25) MAX 28.2 (1.11) 27.7 (1.09) 29.4 (1.15) 28.9 (1.13) 19 F 49.5 (1.94) 48.9 (1.92) 33.44 (1.31) 33.17 (1.30) 35.15 (1.38) MAX 31.4 (1.23) 31.0 (1.32) 32.6 (1.28) 32.1 (1.26) 21 G 52.7 (2.07) 52.1 (2.05) 36.62 (1.44) 36.35 (1.43) 38.28 (1.507) MAX 34.5 (1.35) 34.1 (1.34
6、) 35.8 (1.27) 35.3 (1.38) 23 H 55.9 (2.20) 55.3 (2.17) 39.75 (1.56) 39.52 (1.55) 41.30 (1.62) 41.00 (1.61) 37.7 (1.48) 37.3 (1.46) 39.0 (1.53) 38.5 (1.51) 25 J 59.1 (2.32) 58.4 (2.29) 42.98 (1.55) 42.70 (1.68) 44.50 (1.61) 44.20 (1.74) 40.9 (1.61) 40.5 (1.59) 42.1 (1.61) 41.6 (1.63) FIGURE 1. Recept
7、acle, classes N and Y Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/43B 3 Shell size Shell size code G thread S V ref W O-ring 11 B M20X1- 6g 0.100R 32.2 (1.27) 31.3 (1.23) 28.4 (1.11) 27.5 (1.08) 3.0 (.118) 2.4 (.094) AS 3
8、582-022 13 C M25X1- 6g 0.100R 35.4 (1.39) 34.5 (1.35) AS 3582-024 15 D M28X1- 6g 0.100R 38.6 (1.51) 37.7 (1.48) AS 3582-026 17 E M32X1- 6g 0.100R see note 2 41.7 (1.64) 40.8 (1.60) AS 3582-028 19 F M35X1- 6g 0.100R 46.5 (1.83) 45.6 (1.79) 3.8 (.149) 3.2 (.125) AS 3582-128 21 G M38X1- 6g 0.100R 49.7
9、1.95) 48.8 (1.92) AS 3582-130 23 H M41X1- 6g 0.100R 52.8 (2.07) 51.9 (2.04) AS 3582-132 25 J M44X1- 6g 0.100R 56.0 (2.20) 55.1 (2.16) AS 3582-134 NOTES: 1. Dimensions are in millimeters. 2. Modified major DIA 31.80-31.95. 3. Inch-pound conversion are provided in parentheses for information only. FI
10、GURE 1. Receptacle, classes N, and Y Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/43B 4 REQUIREMENTS: Dimensions and configurations: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. This connector mates w
11、ith MIL-DTL-38999/46 and /47. Main key color: Blue. For insert arrangements: See MIL-STD-1560. Part or Identifying Number (PIN) example: D38999/ 43 N B 35 P N DOD no. prefix Specification sheet no. Class Shell size code Insert arrangement Contact style P Pin, Solder cup. X Pin, Eyelet. Polarizing po
12、sition: N is required for normal position. For contact termination: See MIL-DTL-38999. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-38999/43B 5 Changes from previous issue. Marginal notations are not used in this revision to identify chang
13、es with respect to the previous issue due to the extent of the changes. Referenced documents: In addition to MIL-DTL-38999, this document references the following: MIL-DTL-38999/46 MIL-DTL-38999/47 MIL-STD-1560 SAE-AS3582 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA - CC Navy - AS
14、 Air Force 85 (Project 5935-2010-027) DLA - CC Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
