DLA MIL-DTL-3933 16 E-2011 ATTENUATORS FIXED SPACE LEVEL NON SPACE LEVEL COAXIAL LINE (SMA CONNECTORS) FREQUENCY RANGE DC TO 18 GHz CLASS IV LOW.pdf

上传人:eastlab115 文档编号:690740 上传时间:2018-12-30 格式:PDF 页数:7 大小:73.60KB
下载 相关 举报
DLA MIL-DTL-3933 16 E-2011 ATTENUATORS FIXED SPACE LEVEL NON SPACE LEVEL COAXIAL LINE (SMA CONNECTORS) FREQUENCY RANGE DC TO 18 GHz CLASS IV LOW.pdf_第1页
第1页 / 共7页
DLA MIL-DTL-3933 16 E-2011 ATTENUATORS FIXED SPACE LEVEL NON SPACE LEVEL COAXIAL LINE (SMA CONNECTORS) FREQUENCY RANGE DC TO 18 GHz CLASS IV LOW.pdf_第2页
第2页 / 共7页
DLA MIL-DTL-3933 16 E-2011 ATTENUATORS FIXED SPACE LEVEL NON SPACE LEVEL COAXIAL LINE (SMA CONNECTORS) FREQUENCY RANGE DC TO 18 GHz CLASS IV LOW.pdf_第3页
第3页 / 共7页
DLA MIL-DTL-3933 16 E-2011 ATTENUATORS FIXED SPACE LEVEL NON SPACE LEVEL COAXIAL LINE (SMA CONNECTORS) FREQUENCY RANGE DC TO 18 GHz CLASS IV LOW.pdf_第4页
第4页 / 共7页
DLA MIL-DTL-3933 16 E-2011 ATTENUATORS FIXED SPACE LEVEL NON SPACE LEVEL COAXIAL LINE (SMA CONNECTORS) FREQUENCY RANGE DC TO 18 GHz CLASS IV LOW.pdf_第5页
第5页 / 共7页
点击查看更多>>
资源描述

1、AMSC N/A FSC 5985 . MIL-DTL-3933/16E 7 April 2011 SUPERSEDING MIL-DTL-3933/16D 10 January 2007 DETAIL SPECIFICATION SHEET ATTENUATORS, FIXED, SPACE LEVEL, NON SPACE LEVEL COAXIAL LINE (SMA CONNECTORS), FREQUENCY RANGE: DC TO 18 GHz, CLASS IV, LOW This specification is approved for use by all Departm

2、ents and Agencies of the Department of Defense. The requirements for acquiring the attenuators described herein shall consist of this specification sheet and MIL-DTL-3933. NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Metric equivalents are in parenthes

3、es. 4. Body diameter dimension requirement includes both the diameter of the component body and the Thickness of any externally attached marking label(s). 5. Widths across coupling nut flats are to accommodate wrench, normal size of .3125 (7.938) minimum in accordance with FED-STD-H28, appendix 10,

4、wrench openings. 6. Width of coupling nut hex shall be .150 (3.81) minimum. FIGURE 1. Dimensions and configuration. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3933/16E 2 ENGINEERING DATA: Operating frequency range: dc to 18 GH

5、z. Test frequencies for VSWR and attenuation measurements: dc, 4, 8, 12.4, and 18 GHz. Basic test frequency: 8.0 GHz. Operating temperature range: -55C to +125C. Maximum weight: See table I. REQUIREMENTS: Dimensions and configuration: See figure 1. Nominal impedance: 50 ohms. Attenuation: See table

6、I. Power: See table I. VSWR: See table I. Power sensitivity: 0.005 dB/dB/watt maximum. Temperature sensitivity: 0.0006 CxdBdBmaximum. RF leakage: 80 dB below the input power level over the frequency range of dc to 18.0 GHz. Part or Identifying Number (PIN): M3933/16- (and dash number from table I wi

7、th three device level designators are space level (T), screened (S) and non-screened (N) options). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3933/16E 3 TABLE I. Electrical characteristics. Dash number Attenuation dB Maximum power input

8、25C VSWR maximum 1/ Weight (oz) Max Dimension A (inches) maximum Nominal Deviation dc to 4.0 GHz 4.0 to 8.0 GHz 8.0 to 12.4 GHz 12.4 to 18.0 GHz DC to 18 GHz AV (W) 3/ (continuously) Peak 2/ (kW) 01 N S T 3 0.3 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 02 N S T 6 0.3 2 0.5 1.15:1 1.20:1 1.

9、25:1 1.35:1 0.5 1.240 (31.50) 03 N S T 10 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 04 N S T 20 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 05 N S T 1 0.4 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 06 N S T 2 0.4 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50)

10、07 N S T 4 0.3 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 08 N S T 5 0.3 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 09 N S T 7 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 10 N S T 8 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 11 N S T 9 0.5 2 0.5 1.15:1 1.20

11、1 1.25:1 1.35:1 0.5 1.240 (31.50) 12 N S T 30 1.0 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.8 1.850 (46.99) 13 N S T 40 1.0 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.8 1.850 (46.99) 14 N S T 50 2.0 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.8 1.850 (46.99) 15 N S T 60 2.0 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.8 1.850 (

12、46.99) 16 N S T 0 0.4 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3933/16E 4 TABLE I. Electrical characteristics - Continued. Dash number Attenuation dB Ma

13、ximum power input 25C VSWR maximum 1/ Weight (oz) Max Dimension A (inches) maximum Nominal Deviation dc to 4.0 GHz 4.0 to 8.0 GHz 8.0 to 12.4 GHz 12.4 to 18.0 GHz DC to 18 GHz AV (W) 3/ (continuously) Peak 2/ (kW) 17 N S T 0.5 0.4 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 18 N S T 1.5 0.4

14、2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 19 N S T 2.5 0.4 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 20 N S T 3.5 0.3 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 21 N S T 4.5 0.3 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 22 N S T 5.5 0.3 2 0.5 1.15:1 1.20:1 1.25

15、1 1.35:1 0.5 1.240 (31.50) 23 N S T 6.5 0.3 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 24 N S T 7.5 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 25 N S T 8.5 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 26 N S T 9.5 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.

16、50) 27 N S T 10.5 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 28 N S T 11 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 29 N S T 11.5 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 30 N S T 12 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 31 N S T 12.5 0.5 2

17、0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 32 N S T 13 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3933/16E 5 TABLE I. Electrical characteristic

18、s - Continued. Dash number Attenuation dB Maximum power input 25C VSWR maximum 1/ Weight (oz) Max Dimension A (inches) maximum Nominal Deviation dc to 4.0 GHz 4.0 to 8.0 GHz 8.0 to 12.4 GHz 12.4 to 18.0 GHz DC to 18 GHz AV (W) 3/ (continuously) Peak 2/ (kW) 33 N S T 13.5 0.5 2 0.5 1.15:1 1.20:1 1.25

19、1 1.35:1 0.5 1.240 (31.50) 34 N S T 14 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 35 N S T 14.5 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 36 N S T 15 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 37 N S T 15.5 0.5 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.

20、50) 38 N S T 16 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 39 N S T 16.5 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 40 N S T 17 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 41 N S T 17.5 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 42 N S T 18 0.7 2 0.

21、5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 43 N S T 18.5 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 44 N S T 19 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 45 N S T 19.5 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 46 N S T 20.5 0.7 2 0.5 1.15:1 1.20:1 1.25:1

22、 1.35:1 0.5 1.240 (31.50) 47 N S T 21 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 48 N S T 21.5 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL

23、3933/16E 6 TABLE I. Electrical characteristics - Continued. Dash number Attenuation dB Maximum power input 25C VSWR maximum 1/ Weight (oz) Max Dimension A (inches) maximum Nominal Deviation dc to 4.0 GHz 4.0 to 8.0 GHz 8.0 to 12.4 GHz 12.4 to 18.0 GHz DC to 18 GHz AV (W) 3/ (continuously) Peak 2/ (

24、kW) 49 N S T 22 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 50 N S T 22.5 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 51 N S T 23 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 52 N S T 23.5 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 53 N S T 24 0.7 2 0.

25、5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 54 N S T 24.5 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 55 N S T 25 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.5 1.240 (31.50) 56 N S T 28 0.7 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.7 1.240 (31.50) 57 N S T 32 1.0 2 0.5 1.15:1 1.20:1 1.25:1 1.3

26、5:1 0.8 1.850 (46.99) 58 N S T 36 1.0 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.8 1.850 (46.99) 59 N S T 44 1.0 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.8 1.850 (46.99) 60 N S T 45 1.0 2 0.5 1.15:1 1.20:1 1.25:1 1.35:1 0.8 1.850 (46.99) 1/ VSWR value is for both ends. 2/ Peak power for a duty cycle of 5 x 10-4

27、 maximum pulse duration of 5 microseconds. 3/ Power input is derated linearly to 0.5 watts at +125C. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3933/16E 7 Referenced documents. In addition to MIL-DTL-3933, this specification sheet refer

28、ences the following documents: MIL-STD-348 FED-STD-H28. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5985-2010-014) DLA - C

29、C Review activities: Army - MI Navy - AS, MC Air Force - 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • BS EN ISO 9396-2001 Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus《塑料 酚醛树脂 用自动装置测定在给定温度下的凝胶时间》.pdf BS EN ISO 9396-2001 Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus《塑料 酚醛树脂 用自动装置测定在给定温度下的凝胶时间》.pdf
  • BS EN ISO 9400-1996 Nickel-based alloys Determination of resistance to intergranular corrosion《镍基合金 抗晶间腐蚀性的测定》.pdf BS EN ISO 9400-1996 Nickel-based alloys Determination of resistance to intergranular corrosion《镍基合金 抗晶间腐蚀性的测定》.pdf
  • BS EN ISO 9408-1999 Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respiromete.pdf BS EN ISO 9408-1999 Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respiromete.pdf
  • BS EN ISO 9409-1-2004 Manipulating industrial robots - Mechanical interfaces - Plates《操作型工业机器人 机械接口 板型》.pdf BS EN ISO 9409-1-2004 Manipulating industrial robots - Mechanical interfaces - Plates《操作型工业机器人 机械接口 板型》.pdf
  • BS EN ISO 9409-2-2004 Manipulating industrial robots - Mechanical interfaces - Shafts《操作型工业机器人 机械接口 轴》.pdf BS EN ISO 9409-2-2004 Manipulating industrial robots - Mechanical interfaces - Shafts《操作型工业机器人 机械接口 轴》.pdf
  • BS EN ISO 9431-1999 Construction drawings Spaces for drawing and for text and title blocks on drawing sheets《建筑图纸 图和正文的间隔 图纸上的标题栏》.pdf BS EN ISO 9431-1999 Construction drawings Spaces for drawing and for text and title blocks on drawing sheets《建筑图纸 图和正文的间隔 图纸上的标题栏》.pdf
  • BS EN ISO 9439-2001 Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test《水质 水介质中有机化合物最终有氧生物降解能力性的评.pdf BS EN ISO 9439-2001 Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test《水质 水介质中有机化合物最终有氧生物降解能力性的评.pdf
  • BS EN ISO 9444-2-2010 Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Wide strip and sheet plate《热连轧不锈钢 尺寸规格和形状公差 宽带材和板材 钢板》.pdf BS EN ISO 9444-2-2010 Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Wide strip and sheet plate《热连轧不锈钢 尺寸规格和形状公差 宽带材和板材 钢板》.pdf
  • BS EN ISO 9445-1-2010 Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Narrow strip and cut lengths《连续冷轧不锈钢 尺寸规格和形状公差 窄带和切削长度》.pdf BS EN ISO 9445-1-2010 Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Narrow strip and cut lengths《连续冷轧不锈钢 尺寸规格和形状公差 窄带和切削长度》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1