1、AMSC N/A FSC 6150 INCH-POUND MIL-DTL-52286/2C 18 May 2010 SUPERSEDING MIL-C-52286/2B 10 July 1978 DETAIL SPECIFICATION SHEET CABLE ASSEMBLY, POWER, ELECTRICAL, 2 CONDUCTOR, 20 FEET LONG, OVAL TERMINATIONS, WITH THREE 2-POLE CONNECTORS Inactive for new design after 9 December 2003. This specification
2、 is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-52286, “Cable Assemblies, Power, Electrical (with Molded on Terminations)“. FIGURE 1. Cable assembly, p
3、ower, electrical, three 2-pole connectors.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-52286/2C 2 REQUIREMENTS: Dimensions and configurations shall be in accordance with figure 1 and the MIL-DTL-52286 figures as specified. Connector A shal
4、l be in accordance with figure 6 of MIL-DTL-52286. Dummy B shall be in accordance with figure 8 of MIL-DTL-52286. Cable C shall consist of CO-02 HLF (2/8) 0805. Minimum bond between connectors and cables: 70 pounds. CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to ide
5、ntify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing Activity: Army - CR4 DLA - GS DLA - GS8 (Project 6150-2010-004) Review Activity: Army - AT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
